A420 WP L3 WP L6 elbow for seamless and welded construction

Carbon steel pipe is the most common use piping material in different industries served for construction, structural, liquid transmissions for water, oil and gas. Typical carbon steel pipe material grades in API 5L Grade B, X42 to X70, ASTM A106 B, ASTM A53 B, ASTM A252 Grade 3 and ASTM A333 Grade 6 etc.Mineral and slurry pipe is for the line pipe that applied in mining industries. A slurry pipeline is designated to transmit ores (Iron, Coal materials), or the industry mining waste, we called the pipeline as taillings. And generally these steel pipes connected in a long distances. Above materials mixed with water, we call slurry. People will use pumps to transport to the final destination then water will be filtered out. Since slurry contained different materials some with abrasive properties, so the pipe could be coated with 3PE, FBE layers to against from corrosion.
Both carbon steel pipe in seamless or welded could be used for the transmission of the slurry. So there is a wide range of material and standards available options to suit for the special working conditions.

Forging fittings Carbon content 0.35% maximum and Silicon content 0.35% maximum, no minimum.

A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees.

ASTM A694 carbon steel round bars have different properties due to the presence of alloying elements. Some of the properties inherited by round bars are good ductility, durability, high tensile strength, high temperature stability, high yield strength, high toughness, etc. This is why round bars are used in petrochemical, pharmaceutical, railway, chemical equipment and other industries. Therefore, industrial applications have a smooth flow at work.

For the pipe fittings of small size, such as tee, tee and elbow of socket welding and thread, the shape is relatively complex, so the die forging process should be used.

Carbon steel is defined as any steel with a carbon content not exceeding 2.1% by weight. As the carbon content increases, the ductility of the steel decreases, and carbon steel bolts become harder and increase in strength after heat treatment.

Components like fittings and Carbon Steel SA105 Pipe Flanges aid in regulating the flow of said media. Unlike fittings, flanges, however, work at a deeper level.

ASTM A234 WPB Sch 40 Fittings covers carbon steel fittings of welded and seamless construction secured by the most recent amendment of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97.

ASTM A105 flanges shall be manufactured as one piece by a hot-forging process. This hot-forging process, either die forging or open-die forging, is a compressive hot-working operation. The metal flows in the designed direction during plastic deformation to form a disc-like product that is near to the finished flange.

A234 WP9 carbon steel pipe fittings are widely used in many different industries. Alloy Steel A234 Gr. WP9 Buttweld Pipe Fittings are a type of pipe fitting made from carbon steel material, which is strong, durable, and resistant to corrosion. These Alloy Steel WP9 Butt weld Pipe Fittings are commonly used for connecting pipes and fixing them into place. ASTM A234 WP9 Pipe Fittings can be used for both small and large-scale projects, making them incredibly versatile and useful.

ASTM A694 f60 flanges are also available in different functional types such as blind flanges, reducer flanges, butt weld flanges, etc.

A105 Flanges are disc-shaped parts, which are the most common in pipeline engineering. Flanges are used in pairs and matched with them on valves. In pipeline engineering, flanges are mainly used for pipeline connections. In the pipelines that need to be connected, flanges can be installed in a variety of ways. Wire connection flanges can be used for low-pressure pipelines, and welding flanges can be used for pressures above 4 kg. Add a washer between the two flanges, then tighten with the bolts.

A105 flange These are developed and produced in different shapes and forms. Carbon Steel Flange with their welded necks are good picks for piping with bending stress crack risk.

Monel 400 is a popular nickel-copper alloy commonly used in high performance applications. The alloy has high resistance to acidic and alkaline environments, high strength, good ductility and thermal conductivity. Monel 400 is suitable for use in the subzero to 1,000¡ãF (538¡ãC) temperature range and can only be hardened by cold work.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

These fittings commonly used in pressure pipelines and pressure vessel/tanks at lower temperature.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

ASTM 694 round bars are long cylindrical metal rods primarily used in industrial and commercial applications. However, of all applications, the most common type of application is the shaft. These rods are available in different diameters and can be used in the application. The steel round bars there are available for both cold and hot rolling processes. They have a perfect finish and precise diameter.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 Pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships, where the pipes must transport fluids and gases with higher temperature and pressure levels .

There are 5 most common ASTM A234 WPB Elbow are in mainly in demand, the 45¡ã, 90¡ã and 180¡ã elbows, all three in the “long radius” version, and in addition the 90¡ã and 180¡ã elbows both in the “short radius” version.

All SA234 WPB Elbow are manufactured in India and produced from strictly European sourced raw material. All ASTM A234 Elbow & Elbow A234 Wpc are manufactured from plate, pressed in two halves with two weld seams.

ASTM A234 WPB Fittings are made up of different material grades.Hot formed WPB, WPC, WPR fittings forming at above 620¡æ[1150¨H] to 980¡æ[1800¨H] no need to be heat treated which they are cooled in still air.

Carbon steel LF3 threaded rods have good ductility and optimum creep properties.

There is another type of flange that is known as killed Carbon Steel Forged Flanges. They are destroyed in the melting process.

ASME B16.5 Weld Neck flange dimensions are applicable to all flange materials.

a105 blind flange is forged between 1,700¡ãF to and 2,200¡ãF, followed by quenching and tempering.

Flanges are an integral part of processing based industries. Most industries, including the oil and gas, water treatment and nuclear power generation make use of pipes, which permit the flow of media across different factory units

Carbon steel fasteners are often coated with industrial PTFE (short for polytetrafluoroethylene) in applications that require high strength and corrosion resistance and are economically viable. SAE-AISI 1018, 1020, 1040, 1045/CK45 are common carbon steel grades used to produce these fasteners. Industry specifications such as ASTM A36, A193, A194, A307, A354, A449, A540, A563, F1554 and SAE J429 cover high strength carbon steel fastener grades.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.