A420 WP L3 WP L6 elbow used for low-temperature applications

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A516 CS 70 grade flanges are used in a variety of applications such as bridges, buildings, auto and truck parts, rail vehicles, pressure vessels, boilers, valves, heat exchangers, cargo containers, suitcases, construction equipment, structural pipes and Power poles, etc.

ASTM A420 WPL6 are widely utilized in pressure piping and pressure vessel service at low-temperatures.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

For industrial purposes, in pipeline systems usually we need to change the transmission direction; Adjust fluids (oil and gas, water, slurry) flow rate; Open or close the pipelines, etc. So to complete these activities, steel pipe fittings will be applied.

U-Bolts are easy to machine and can meet the tight tolerances required for thread and fastener configurations. Carbon steel is also an economical metal. Carbon steels are classified by the amount of carbon in the alloy, which affects the properties of the steel. Mild steel with a carbon content of 0.05-0.3% is ductile and ductile. Low tensile strength and hardenable by carbonization. It is the lowest cost of carbon steel alloys.

ASTM A105 is a carbon steel material grade that has the greatest and widespread use. This is used in manufacturing forge piping components.

Components like fittings and Carbon Steel SA105 Pipe Flanges aid in regulating the flow of said media. Unlike fittings, flanges, however, work at a deeper level.

The ASTM A307 specification covers carbon steel bolts and studs ranging in diameter from 1/4″ to 4″. This is your everyday mill bolt specification, usually made from A36 round bar. There are three grades A, B and C* for tensile strength, configuration and application, respectively. See the mechanical properties chart for subtle strength differences within each grade.

ASTM/ASME A106/SA106 seamless carbon steel pipe is used in industrial applications involving high heat, including process piping, boiling plants, compression stations and refineries.

The material has carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium in its composition.There are also different types based on the shapes. The carbon steel a105 blind flange is a very special type.

ASTM A350 lf2 round bars are forged from standard quality carbon steel alloy. It has excellent tensile strength, corrosion resistance, ductility and mechanical properties that make it an excellent product. These carbon steel A350 LF2 bars are guaranteed to deliver the toughest industry standard products of the highest quality. Our CS A350 LF2 bars are made with the support of the latest equipment and are fully compliant with established industry specifications.

The carbon steel gets its mechanical properties and physical properties from this material composition. A350 Lf2 Cl1 Flanges are the one which deliver excellent performance and are generally meet the demands. The steel shall be produced by any of the following primary processes: Open-hearth, basic-oxygen, electric-furnace or vacuum-induction melting (VIM).

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A234 WPB SCH 80 Elbow is a standardization that conforms to schedule 80. ASTM A234 WPB Elbow could also be threaded or machined; sometimes it is also socketed.

A515 grade 70 carbon steel has the advantage of high strength due to its machinability and formability characteristics. Due to their high chromium content, these carbon steels have excellent corrosion resistance in many media.

Carbon steel A105 bars are also used in offshore oil industry and seawater equipment. Carbon steel A105 round bars are commonly used in pumps, condensers and heat exchangers. These carbon steel A105 bars ensure the toughness to deliver the highest quality industry standard product. A105 is very popular in several industries for its enhanced potency and strength. Carbon steel a105 round bars have good machinability and are widely used for ideal finish, long lasting performance and corrosion resistance. The a105 square bar is widely used in many industries for manufacturing or final assembly. Our A105 bars are suitable for chemical, power and engineering industries. Designed with our engineering advantages, these A105 rods are widely used for ideal finish, ease of installation, long-lasting performance and corrosion resistance.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Best price on Carbon Steel A350 LF2 Bright Rod with shortest time delivery or Free Sample of Carbon Steel A350 LF2 Hexagonal Rod.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The most common dimensional standard for 45 degree carbon steel is SME B16.9, B16.28 MSS-SP43/75 for sizes ranging from ?¡± to 72¡å (in all Schedules).

At HT PIPE. we invest in premium resources and dependable technology and machinery. NISPL has given an impetus to several industries during the last three decades, through its outstanding products and extraordinary services.

ASTM A105 covers forged carbon steel flanges and piping components for ambient and high temperature service in pressure systems. It also includes fittings, valves and similar parts. The maximum weight of manufactured forgings to which this standard follows is 10,000 circles (4,540kg). Larger forgings can be made in accordance with Standard A 266/A266M. This specification does not cover tube sheets and hollow cylindrical forgings for pressure vessel shells.

All grades of ASTM A694 F42 shall be heat treated. Heat treatment of carbon steels and high strength low alloy steels can include normalizing, normalizing and tempering, or quenching and tempering. The heat treatment of alloy steel may include normalizing and precipitation heat treatment or quenching and precipitation heat treatment. The tempering temperature should be at least 1000¡ãF [540¡ãC]. Precipitation heat treatment for alloy steels should be in the range of 1000 to 1225 ¡ãF [540 to 665 ¡ãC].

ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASME B16.5 Weld Neck flange dimensions are applicable to all flange materials.

We are manufacturer & exporters of A105 Flanges, ASTM A350 Carbon Steel Flanges, A694 Carbon Steel Flanges, Alloy Steel Pipe Fittings, ASTM A182 Alloy Steel Flanges, ASTM A182 F5, ASTM A182 F9, ASTM A182 F11, ASTM A182 F12, ASTM A182 F22, ASTM A182 F91, ASTM A105 Flange, ASTM A350 Flanges, ASTM A694 Flanges

These ASTM compliant plates can be considered for applications such as pressure vessels and boilers.