AISI ASTM ASME DIN JIS Carbon Steel WN Flanges RF

ASTM A420 WPL6 are widely utilized in pressure piping and pressure vessel service at low-temperatures.

Our carbon steel ferrule manufacturing unit is capable of producing large and custom orders from our customers around the world. These high chromium carbon steels, while belonging to the stainless steel category, are not fully corrosion resistant. The elements in carbon steel groove washers have a large effect on heat treatment; because they tend to slow the diffusion of atoms through the iron lattice, thereby delaying the allotropic transformation. The hardenability of carbon steel washers can be improved by adding elements such as manganese, molybdenum, chromium, nickel and boron.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Medium carbon steel bolts, anchor bolts, screws, studs, nuts and self-drilling screws contain between 0.25 – 0.60% carbon and 0.60 – 1.65% manganese by weight. The mechanical properties of these studs are improved by heat treatment.

The specification is for pressure piping and fitting in the high or moderate temperature services.ASTM A234 (ASME SA234) pipe fittings after shaping from an elevated temperature, shall be cooled down to a temperature below critical range under suitable conditions which preventing injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. Referring standard in Section 7 of ASTM A960/A960M.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In the manufacturing industry, the production is done by obviously using the best possible quality of crude materials and alloys. It thus tends to offer various good attributes.

ASTM A234 WPB Elbow is a standard specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel suitable for for Moderate and High Temperature Service.

ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 Pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships, where the pipes must transport fluids and gases with higher temperature and pressure levels .

This is called as the “center to face” distance and is equivalent to the radius through which the ASTM A234 gr WPB elbow is bent.

Chrome-Molybdenum ASTM A234 WPB Reducer Elbow for the petrochemical, nuclear, gas and oil industries, Norsok Ed4, BP, Saudi Aramco, SABIC, and Shell approved, producing ASTM A234 WPB alloy steel butt welding pipe fittings.

The typical hardness of mild steel is Rb70/85. Parts requiring high strength and wear resistance or for use in critical components can be fabricated from high carbon steel or case hardened after fabrication. Chromate coatings can provide corrosion protection. Carbon steel washers are used for fastening in various industries.

U-bolt diameter: ¦Õ7mm, plate size: 3.890 x 1.142 x 0.110mm.
Material: Q235B carbon steel, electro-galvanized surface to improve the rust and corrosion resistance of U-bolts.
Nut: Anti-slip washer design.
Application: For fixing or connecting blocking pieces to pipes, wood, etc. Suitable for boats, plumbing and other domestic and industrial applications.
Package Contents: 10 U-Bolts, 20 Nuts, 20 Round Washers, 10 Plates.

The flanges also have good strength properties. There are also different types based on the shapes. The carbon steel a105 blind flange is a very special type because it closes a connection and not expand it.

ASTM A694 F65 is a key grade for Special Quality Alloys Ltd. We carry a wide range of re-forging stock which allows us to manufacture forgings on short lead-times. The material is often selected for its high yield capabilities combined with its excellent low temperature toughness and weldability.

ASTM A234 WPB Fittings are made up of different material grades.Hot formed WPB, WPC, WPR fittings forming at above 620¡æ[1150¨H] to 980¡æ[1800¨H] no need to be heat treated which they are cooled in still air.

Flanges, fittings, valves and other components in the A694 specification are suitable for high pressure transfer service.

Carbon steel gr A105 is the result of a dual phase microstructure, which is alloyed with nitrogen.

The carbon steel seamless pipe fittings, buttwelded fitting and fabricated ones are available in the market.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.

Often the angle of elbow is 90 degrees but there are different types of elbows with different angles as well. The Carbon steel welded pipe fittings are also one of the cost efficient methods to apply with other types of steel.

The ASTM A420 Grade WPL6 can be seamless, welded or fabricated. There are different types of the fittings such as the unions, plugs, couplings, bends, caps and elbows.

The flange connection type usually comes with double units, with a gasket and some bolts & nuts to connect each other. (Firstly pipes are welded on the flanges, then valves and other equipment could be installed on flanges.)

When connecting these parts, put gasket in the middle of two flanges, then tightening the flange screws, so the two will be connected together tightly.

ASTM A105 Flange is a forged carbon steel flange used in piping systems for high temperature services and ambient temperature services in different pressure conditions.

The LTCS A420 WPL6 Weld Fittings are greatly resistant against the sea water and marine environments with 1/8 inches to 48 inches nominal bore sizes.

A-694 grades, F42 to F70 (for high volume applications). Due to the superior strength of this material, you will find a high-volume material widely used in plumbing services. Alloy steel forgings have higher chromium and molybdenum content than standard carbon steel forgings and are designed for high temperature (over 1000*F), high pressure service. They also have higher corrosion resistance than standard carbon steel forgings due to their higher chromium content.

A350 LF2 carbon steel round bars are available in different sizes and designs to meet all customer requirements. We supply these bars of different sizes and shapes according to the requirements of our esteemed customers, which are designed according to the quality of raw materials according to national and international standards. Carbon Steel A350 LF2 round bars are manufactured from standard quality carbon steel alloys. These bars showcase the powerful features and properties that make them ideal products. Rebars are welded by the practice of welding process.

Flanges are an integral part of processing based industries. Most industries, including the oil and gas, water treatment and nuclear power generation make use of pipes, which permit the flow of media across different factory units

ASTM A694 f60 flanges are also available in different functional types such as blind flanges, reducer flanges, butt weld flanges, etc.