Aleacion 20 NiCr20CuMo Tubos de Metal de Niquel

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

La resistencia a la corrosion de los accesorios de aleacion 20 es muy buena. Puede funcionar ininterrumpidamente a altas temperaturas. Tenemos una instalacion de produccion facil de usar. Para fines de produccion, nuestra empresa adopta excelentes metodos y tecnicas de procesamiento.

Inconel 600 pipe is a nickel- chromium based alloy. Alloy 600 UNS N06600 Square Pipe offers good resistance against corrosion at elevated temperatures. The other characteristics of the 600 Inconel Seamless Pipe is its good resistance in carburizing as well as in chloride containing environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Incoloy Alloy 625 Tubing has excellent strength resistance in high-temperature settings and outstanding oxidation and carburization resistance in high-temperature settings. While Incoloy Alloy 625 Tubing has good creep-rupture strength and good corrosion resistance in aqueous environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Incoloy 800/800H/800HT grade alloys have a variety of special properties and characteristics that make pipes and tubes even more demanding. As a manufacturer and supplier of such products, we ensure that all our products are manufactured according to the needs and requirements of our customers. Therefore, we use high-quality raw materials that are well tested and used according to international quality standards. With it, modern technology and the latest tools can be used to create pipes and tubes of precise size and length.

Hastelloy B2 Welded Pipes is a wrought nickel-molybdenum alloy that can be used in the ¡®as welded¡¯ condition.

The seamless nature results in a very uniform surface, which results in a uniform wall thickness along the length of the pipe. There are alloy nickel tubes and pure alloy tubes. Pure nickel pipe is actually commercially pure and contains about 99% nickel in its composition. Nickel welded pipe is ideal for welding needs. Nickel is inherently very corrosion resistant and lightweight. These attributes of elements are used in various applications.

Alloy 400 is a solid solution of gold that can only be hardened by cold work.

La aleacion tambien es resistente a soluciones y compuestos de cloruro, muchos de los cuales son altamente corrosivos. Por ejemplo, los reductores de aleacion de niquel C276 son resistentes no solo a los medios organicos e inorganicos termicamente contaminados, sino tambien a los cloruros ferricos y c¨²pricos, asi como al cloro, el agua de mar y la salmuera.

Moreover, the material is less likely to get corroded by both oxidative and reductive acids. Acids such as phosphoric acid, nitric acid, sulfuric acid, and hydrochloric acid have little effect on the ASTM B444 uns n06625 pipe.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Alloy C-276 can be formed using various cold and hot working processes. Like other nickel alloys, Alloy C-276 work hardens very quickly, although it can be cold formed using aggressive methods such as deep drawing, stamping and stamping.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.33

Monel 400 has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. The composition is shown in the Table below.

Some typical applications for Inconel 625 include chemical processing, aerospace and marine engineering, pollution control equipment and nuclear reactors. This nickel alloy has excellent weldability and is often used to weld AL-6XN. This alloy is resistant to a variety of severe corrosive environments, especially pitting and crevice corrosion.

Hastelloy B-3 is a nickel-molybdenum alloy with excellent resistance to pitting, corrosion, and stress-corrosion cracking plus, thermal stability superior to that of alloy B-2. In addition, this nickel steel alloy has great resistance to knife-line and heat¨Caffected zone attack.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Nickel201 application areas:Food processing equipment, salt refining equipment;Mining and marine mining;
Equipment required for the manufacture of industrial sodium hydroxide at high temperatures above 300¡ãC.

This is because when Inconel is subjected to very high heat it forms a very stable oxide layer which thus protects the surface of the metal from further corrosion. This process is called ¡®passivation¡¯ and it is a very beneficial chemical reaction that effectively means that Inconel builds its own ¡®shield¡¯ against future damage.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The pipes are having good stress corrosion cracking and pitting resistance ability.

As one of the most versatile and productive metals, nickel readily forms alloys with various elements. Typically, elements such as chromium, molybdenum, copper, and tungsten are used to manufacture high-alloy nickel alloy seamless pipes. A desirable property of commercially pure nickel is the metal’s ability to withstand high temperature settings. Therefore, in those applications that require higher mechanical properties at high temperatures, pure nickel thermal finished tubes are an ideal alternative.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.25

Thus precipitation hardening treatments are not required. This combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high temperature effects such as oxidation and carburization.

Nickel alloys are mainly nickel 200 and nickel 201. These nickel alloys are often used to make strong quality pipes. They have high resistance. They are commonly used in aircraft gas turbines, steam turbine power plants, medical applications, nuclear power systems, chemical and petrochemical industries. Pipes and tubing made of nickel alloys are environmentally friendly and easy to maintain.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.66

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

HASTELLOY C-276 is a nickel-chromium-molybdenum alloy with general corrosion resistance unmatched by any other alloy. It has excellent resistance to a variety of chemical process environments, including ferric and cupric chlorides, thermally contaminated inorganic acids, solvents, chlorine and chlorine contamination (organic and inorganic), dry chlorine, formic and acetic acids, acetic anhydride , seawater and brine solutions, hypochlorite and chlorine dioxide solutions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Otra diferencia entre la tuberia soldada Astm B626 de aleacion de niquel C276 y la aleacion C es que la tuberia de aleacion C276 tiene una mejor maquinabilidad.

These tubes can be readily welded in place following common welding process without requiring a matching filler metal.

Inconel Pipe 601 contains molybdenum and columbium, which stiffens and strengthens the nickel-chromium matrix without precipitation hardening treatments. Some hardening however does occur when heated to intermediate temperatures increasing room temperature strength. Also, this alloy retains over 75% of its room temperature strength at 1200 F.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Hastelloy Alloy B2 Pipes is known for its excellent chemical resistance, suited to high pressure and high temperature applications.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

These tubes are available in round, hollow, rectangular, hydraulic, coiled and different other shapes. Welded nickel alloy pipes are produced by welding steel pieces together with the help of fillers. These welded tubes are available in sizes between 5mm and 1219.2mm. We are Nickel Alloy Tube Manufacturer and can customize all our products according to your requirements in different shapes and sizes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.54