Aleacion 20 Z2NCUD31-20AZ Tubos de Metal de Niquel

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Alloy 625 / Inconel 625 is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. It has become a standard material of construction in a wide variety of industrial applications, which is unusual for an alloy. Alloy 625 is valuable in that it is versatile and able to solve a wide variety of design and application problems.

Inconel Alloy 600 Pipes has a larger pressure fast resistance in condensation group nuclear devices for piping, centrifuges and weldments.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

The Pipe Inconel 625 contains high levels of nickel and can be thought of as super-stainless steels. Inconel alloys are used for a variety of extreme applications including navy boat exhaust ducts, submarine propulsion motors, undersea cable sheathing, heat exchanger tubing and gas turbine shroud rings.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Alloy 800H Welded Pipes (also known as WNR 1.4958 Welded Pipe). Chemical and petrochemical processing industries use these UNS N08810 Welded Pipes for heat exchangers and other piping systems in nitric acid media especially where resistance to chloride stress-corrosion cracking is required. Power plants use them for super-heater and re-heater tubing.

The INCONEL alloy tubes easy to produce and readily manufactured, which has led to its use across a wide range of industries. It is often employed in rocketry, creating tubes and pipes for liquid-fuelled rockets, as well as in the aerospace industry.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Additionally, the alloy’s properties make it an excellent choice for sea-water applications, including freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength, and resistance to chloride-ion stress-corrosion cracking.

La tuberia de aleacion Incoloy 20 UNS N08020 se usa generalmente en la construccion, exploracion de petroleo, medicina, alimentos, papel, maquinaria, productos quimicos, contenedores de alimentos y otras industrias.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Seamless nickel alloys are available from XS, SCH30 to SCH160. This alloy is very durable and has a long service life. ASTM B161 Nickel Seamless Pipe is available in sizes from 4mm to 219mm. These pipes are manufactured to all standards and requirements.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.52

Hastelloy B-3 is a nickel-molybdenum alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures. It also withstands sulfuric, acetic, formic and phosphoric acids, and other nonoxidizing media. B-3 alloy has a special chemistry designed to achieve greater thermal stability than B-2 alloy, resulting in easier fabrication.

La materia prima de Alloy 20 es de alta calidad. Esto ayuda a que el producto final funcione en condiciones severas de corrosion y agrietamiento. A traves de una serie de pruebas, hemos llegado a diferentes informes y conclusiones. Nuestro analisis promete pruebas quimicas, pruebas de elementos traza y varias otras comprobaciones.

Compared to stainless steel, this material has a lower yield strength of 148MPa minimum and 462MPa minimum tensile strength. Nickel 200 ERW pipe is also dense as it contains 99% nickel as well as carbon manganese, silicon, iron, sulfur and copper. The density is 8.9 grams per cubic centimeter.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.60

The hastelloy b2 pipe suppliers in Mumbai recommend using this ASTM B622 specified B2 Hastelloy Pipe because the alloy has good resistance to chloride ion induced stress related corrosion cracking or SCC.

Nickel alloy pipes and tubes have excellent mechanical properties, low gas content, low vapor pressure, magnetic properties, and high thermal and electrical conductivity. These properties and their chemical composition make nickel highly resistant to corrosive environments. Nickel can be used in any environment below 600o F. It is highly resistant to corrosion by neutral and alkaline salt solutions. Nickel also has low corrosion rates in neutral and distilled water. Metal can be hot formed into any shape or cold formed by all methods.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.65

The Inconel alloy pipes produced are tested for several mechanical properties like tensile and yield strength, elongation along with both non-destructive electric and hydrostatic tests. These hot finished or cold worked alloy pipes are well suited for use in applications that demand the need for general corrosion resistance properties. Regular welded pipes are susceptible to intergranular corrosion.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

A benefit of using the Inconel alloy tubes is its stability at elevated temperatures. This nickel-iron-chromium alloy can maintain its austenitic microstructure despite the Inconel alloy pipe being exposed to elevated temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Inconel 600 is a chromium-nickel alloy designed for use at temperatures up to 2000 F and down to as low as cryogenic levels. The alloy is resistant to reducing environments as well as chloride stress corrosion cracking due to its nickel content and resistant to weaker oxidizing conditions through its chromium content. Inconel 600 is an austenitic alloy with high nickel content that is non-magnetic and has excellent mechanical properties at both high temperatures and cryogenic temperatures.

Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

HASTELLOY C276 is one of the few alloys resistant to wet chloride gas, hypochlorite and chlorine dioxide solutions.

Nickel alloys of the MONEL series can also be used for pipes and tubes. MONEL Alloy 400 is a cost-effective option but can be hardened by hot or cold work, providing a very durable end product. It has been on the market for decades and is ideal for marine applications due to its resistance to seawater corrosion. It can also be used for heat exchanger piping and rocket applications.

Nickel 200 ERW piping applications are varied in condenser, paper and pulp industry, seawater equipment, pharmaceutical, power generation, oil drilling, petroleum and petrochemical industries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.61

Alloy 625 is a nickel-chromium alloy used for its high strength, excellent fabricability and outstanding corrosion resistance. Service temperatures can range from cryogenic to 980¡ãC (1800¡ãF). Alloy 625 strength is derived from the solid solution strengthening effect of molybdenium and niobium on its nickel-chromium matrix.

The product to the buyer is supplied at the comprehensive range that vary in sizes, thickness, length, ends etc.

Alloy 22 is nickel-base and typically contains 22% chromium, 14% molybdenum, and 3% tungsten.
Iron is normally limited to less than 3%. The alloy¡¯s high content of chromium gives it good resistance to
wet corrosion by oxidizing media (e.g., nitric acid and ferric and cupric salts). Its contents of molybdenum
and tungsten give the alloy resistance to wet reducing media (e.g., sulfuric and hydrochloric acids). Alloy
22 exhibits excellent resistance to corrosive attack by seawater under stagnant and flowing conditions.

Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Inconel 600 pipe is a chromium-nickel alloy designed for use at temperatures up to 2000 F and down to as low as cryogenic levels. The alloy is resistant to reducing environments as well as chloride stress corrosion cracking due to its nickel content and resistant to weaker oxidizing conditions through its chromium content. Alloy 600 seamless nickel pipe is an austenitic alloy with high nickel content that is non-magnetic and has excellent mechanical properties at both elevated temperatures and cryogenic temperatures. Werkstoff NR 2.4816 Pipes have common applications in gas turbine blades, seals, and combustors, and turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, and so on. We are manufacturer, stockiest and exporter of ASTM B829 Inconel 600 Seamless Pipe and we offer these pipes in custom-made sizes and thicknesses, as per the exact demands of our admired clients.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.