Alloy 20 elbow N08020 nickel alloy SCH80S 2.4660 elbow

Nickel alloy 20 is a low-carbon, niobium-stabilized austenitic nickel/iron/chromium alloy with additions of molybdenum and copper. ASTM B366 specification covers Inconel, Monel, Hastelloy and Nickel Alloy Pipe Fittings used in acidic and sea water.

HT PIPE is a leading supplier of Alloy 800 and other high-quality special metal alloys with decades of experience and extensive specifications.

The presence of this sigma phase in UNS S31803 dual-phase steel elbows is detrimental to the alloy because, in addition to the corrosion resistance of the material, it greatly reduces properties such as impact resistance at room temperature.

Nickel alloys are used in applications involving elevated temperatures, corrosion , or both. Chemical processing equipment relies on the corrosion performance over a wide range of environments.

There are the pressure grade ASTM A234 WPB Pipe Fittings in ? inches to 24 inches nominal bore sizes with different wall thicknesses that correspond to the schedules.It does not cover cast welding fittings which refered standards are ASTM A216/A216M and A217/217M.

316 is a member of the 18/8 chromium nickel family of austenitic stainless steels, with an addition of 2% molybdenum for improved corrosion resistance, particularly to localised corrosion in chloride containing environments.

ASTM A860 MSS SP 75 WPHY 52 Fittings are generally used at High Pressure requirements.Our wide range of Grade WPHY 52 Pipe Fittings includes: WPHY Gr 52 Bend, Elbow WPHY 52 in 45/90 degree, WPHY Grade 52 Tees, Carbon Steel WPHY 52 U Bend, MSS SP75 WPHY Gr 52 Stubends & ASTM A860 WPHY Grade 52 Pipe Nipple.

However, titanium can lose its strength at temperatures greater than 430?C because it is not as hard as high grades of steel.

Duplex UNS S31803 butt welded pipe fittings are duplex ferritic austenitic 22% chromium, 3% molybdenum, 5% to 6% nickel alloy stainless steel. Duplex UNS S31803 butt welded pipe fittings are formed according to the crystal structure of stainless steel.

SS UNS S31603 Equal Tee is available in welded and seamless versions for a 90¡ã connection to the main pipe. They are also resistant to high temperatures and pressures and have wall thicknesses suitable for pipes in the automotive, industrial, marine and power generation industries. Molybdenum-containing austenitic stainless steel DIN 1.4404 seamless pipe fittings are relatively low in carbon compared to DIN 1.4401 grades, but with small additions of molybdenum and nitrogen, and are used in light or moderately corrosive industries.

Oil and gas exploration and offshore drilling platforms rely heavily on the use of duplex steel forged fittings as this alloy facilitates smoother operating procedures in the industry.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

With the addition of niobium stainless steel WNR 1.4401 fittings, the fittings become stable against sensitization and the resulting intergranular corrosion. It also prevents intergranular corrosion in the welded state. It can also be thermoformed by using the isoforce required to heat austenitic steels. It has precise mechanical housing for every environment and elevated temperature. The copper-containing material in the fittings protects them from sulfuric acid.

When choosing pipe fittings, material is always a big part of the choice. Stainless steel offers excellent protection against corrosion and rust, something which could prove hugely troublesome within water and gas pipes. Brass and copper pipes wouldn’t have the same resistance to these kinds of issues.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.

Duplex Steel S31803 Elbow Butt Weld Fittings are stainless steel, a type of stainless steel designed to improve resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. Duplex steel S31803 tee butt welded pipe fittings are often used in chemical process industries: such as sulfuric acid production, nitric acid process, phosphoric acid process, ethylene oxide, polypropylene production, PVC, equipment for handling organic and fatty acids, chemical storage and tankers, thermal switch, etc.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Incoloy 800H Pipe Fittings (UNS N08810) is in fact an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep rupture strength.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Rotary draw bending can also utilize mandrels.

A234 WP11 Fittings can effectively be bent and welded. ASME SA 234 wp11 that shape important associations between different pipes of different sizes. Elbow A234 WP11 is the free machining adaptation of this grade, accessible in bar shape for utilizing in automatic screw machines.

The high-temperature plasticity of the experimental alloy added with trace amounts of Mg, Cr and Co is obviously improved, and it exhibits certain superplasticity. At 1010¡æ, the strain rate sensitivity index m is 0.32, and the maximum elongation is 240%.

317L stainless steel 180 degree elbow has very high corrosion resistance, but it is getting more and more expensive. The products we offer are known throughout the world for their reliability and quality.

ASME B16.9 SS Pipe Fittings that have matching pipe schedules offer seamless flow inside the pipe. A properly fitted elbow helps in gradual transition via pipes which can be terminated using a Stainless Steel pipe cap. Most of the buttwelds are beveled ended. This helps in creating full penetration without the need for extra penetration for ASME B16.9 SS Pipe Fittings.

N04400 is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Alloy N04400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acid-like substances), brine, hydrofluoric acid, and sulfuric acid. Other advantages of using this alloy are toughness and high strength over a wide temperature range; it can also be manipulated to be magnetic if desired.

Duplex steel pipe fittings are the profession of repairing or installing pipes or piping systems that carry liquids, gases and occasionally solid materials. It is a ferritic-austenitic microstructure with a phase balance of approximately 50% ferrite and 50% austenite.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The mixture of austenitic chromium-nickel-iron with a small amount of molybdenum makes Alloy 20 known as a “superalloy,” which provides resistance to acid attack under a variety of conditions. We are a manufacturer of ANSI B16.9 Alloy UNS N08020 Equal Tee with good machinability.

In addition to heat resistance, Hastelloy Buttweld Fittings have high resistance to corrosion, pressure and oxidation. Hastelloy pipe fittings also have excellent mechanical properties and are often used in the chemical and aerospace industries.