alloy 20 pipe fittings elbows

Stainless Steel 310s Fittings are austenitic steel products specifically designed for applications requiring corrosion resistance at elevated temperatures. Our ASTM SA403 GR.TP 310S fittings contain high levels of chromium and nickel which contribute to its corrosion resistance, superior strength and corrosion resistance.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Hastelloy C-276 pipe fittings refer to factory-made wrought nickel alloy fittings manufactured to ASTM B366 UNS N10276. It can be designated as CRHC276(corrosion resistant fittings) or WPHC276(ASME pressure fittings). The fittings can be manufactured from pipe or tube of ASTM B619, B622, B626 UNS N10276, plate, sheet or strip of ASTM B575 UNS N10276, forging or bar of ASTM B564, B462, B472, B574 Gr. N10276. The Hastelloy C-276 fittings are mainly furnished in 3 connection types: butt welding, threaded, socket welding, covering a variety of standard specifications.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Applications in the chemical process industry involving sulfuric, phosphoric, hydrochloric and acetic acid.

The stainless steel pipe fittings are available in different cast stainless steel grades including 304, 316, and 316L stainless steel. Different casting grades of stainless steel are suitable for different environments.

There are the pressure grade ASTM A234 WPB Pipe Fittings in ? inches to 24 inches nominal bore sizes with different wall thicknesses that correspond to the schedules.It does not cover cast welding fittings which refered standards are ASTM A216/A216M and A217/217M.

HT PIPE has an excellent production company for designing and developing superior Pipe Fittings SS 316/316L. During the testing and production phases, our expert team examines strictly SS 316/316L buttweld pipe fittings.

Duplex 2205 fittings must be cooled to room temperature as soon as possible after being processed by thermoforming. This is what has to be done in order to avoid precipitation of intermetallic or especially so-called sigma phases. The presence of this sigma phase in UNS S31803 dual-phase steel elbows is detrimental to the alloy because, in addition to the corrosion resistance of the material, it greatly reduces properties such as impact resistance at room temperature.

Cuni 70/30 elbows have superior strength to withstand higher speeds in seawater.

AISI 316 and 316L stainless steels offer increased resistance to atmospheric corrosion, many organic and inorganic chemicals, and food and beverages. 316L has a maximum carbon content of 0.03 and is suitable for welding, while 316 has a moderate carbon content.

Inconel 601 (UNS N06601 ) nickel-based alloy density: 8.42 g/cm3 (grams/cubic centimeter).

Our stainless steel 310S butt weld fittings are said to be the most commonly used and easiest to use, offering more forms and finishes than any other grade in the stainless steel range. Since it is the low carbon form of the alloy, these SS 310 butt welded pipe fittings are used to simplify production.

Therefore, stainless steel elbows are widely used in high temperature applications. A403 WP316 elbows are widely used to change the direction of pipes and are available in different diameters, shapes and sizes. A403 WP304 elbows can be easily welded, but the material may face localized corrosion due to the risk of intergranular corrosion.

The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.Common use material are ASTM A234 Grade WPB, WPC, WP5, WP9, WP11, WP22 and WP91. It covers the butt-welded pipe fittings of Elbow, Tee, Reducer, Cap and Cross, and some socket welding, threaded pipe fittings.

Wide diameter fabricated ASTM A403 Stainless Steel Tee Fittings, thick-walled stainless steel Tee fittings, and thin-walled stainless steel Tee fittings are all available from us.

MONEL K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium.

HT PIPE is a leading supplier of Alloy 800 and other high-quality special metal alloys with decades of experience and extensive specifications.

UNS S31254 is an alloy material with anti-corrosion effect, its density is 8.0g/cm3, and the melting point is 1320-1390¡æ. High molybdenum content and high chromium and nitrogen content make UNSS31254 extremely good resistance to pitting and crevice corrosion. The addition of copper improves corrosion resistance in certain acids. In addition, UNSS31254 has good resistance to stress corrosion cracking due to its high nickel content and high chromium and molybdenum content.

Inconel 718 Fitting (UNS N07718) is a chromium-nickel-molybdenum alloy considered resistant to a wide range of severe corrosive environments, crevice corrosion and pitting corrosion. Inconel 625 Fitting (UNS N06625) is an oxidation and corrosion resistant nickel alloy with excellent water corrosion resistance and high strength. Inconel 601 Fitting (UNS N06601) is a nickel-chromium alloy used for functions requiring heat and corrosion resistance.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Stainless steel pipe fittings are used to connect 2 pipes as they have a pipe fitting at one or both ends. The stainless steel reducing tee has a tensile strength of 515 MPa and a yield strength of 205 MPa.

Unlike other types of steel such as 304 and 306, the 316l stainless steel alloy can be used in a variety of applications where high corrosion resistance is required. For example, specialists in the chemical and pharmaceutical industries use it to make surgical tools and medical implants.

ASTM A420 is the standard specification for pipe fittings of wrought carbon steel and alloy steel for low temperature service. These fitting, either of seamless or welded construction, are primarily used in pressure piping and pressure vessel service at low temperatures. Metals-Piping can provide all the four steel grades covered by ASTM A420: WPL6, WPL9, WPL3, and WPL8.

Grade 1.4404 or 316L is an austenitic stainless steel AISI 316 with very good corrosion resistance due to its high chromium and molybdenum content and low carbon content. Its strength in the hardened state is about 600 MPa for large diameters, but for small sections, the strength can be increased by cold working.

We are manufacturing buttweld seamless and welded Stainless steel 304/ 304L fittings, Stainless steel 304/ 304L flanges and Stainless steel 304/ 304L pipe bends in accordance with ANSI/ASME and DIN standards.

The accumulation of copper to the grade 904L alloys makes it resistant to corrosion, especially phosphoric, acidic, and sulphuric acid.It Is A Kind Of Corrosion And Heat Resistant Steel.

HASTELLOY X pipe bend is a wrought nickel base alloy with excellent high temperature strength and oxidation resistance. All of the product forms are excellent in terms of forming and welding.