alloy 20 tees with elbows and reducers

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

Hastelloy B2 is a nickel-molybdenum alloy especially suitable for handling equipment that reduces chemical environments. Such as applications in chemical processing industries involving sulfuric acid, phosphoric acid, hydrochloric acid and acetic acid.

A nickel alloy of this type also has great resistance to hydrochloric acid at different concentrations and temperatures.

Just as the name ¡°Pre-engineered¡± suggests, these s are engineered at a factory and are assembled at site.

A Pre-engineered steel is basically a that is made up of steel.

The versatility of INCONEL 600 alloy allows it to be used in a variety of applications involving temperatures ranging from cryogenic temperatures to over 2000¡ãF (1095¡ãC).

This alloy is widely used in the chemical industry for its strength and corrosion resistance. Applications include heaters, stills, bubble columns, and condensers for fatty acid processing; evaporator tubes, tube sheets, and sheeting trays for the manufacture of sodium sulfide; and equipment for processing abietic acid in pulp production.

Hastelloy C-276 also has excellent resistance to pitting corrosion, stress corrosion cracking and oxidizing atmospheres, as well as excellent resistance to many different chemical environments.

Prefabricated steel s take advantage of offsite prefabrication to improve the speed or erection and cost predictability of the solution.

Built-up sections are produced at the factory and is then transported to the original site and assembled. This concept is generally used to build Metro stations, industrial units, warehouses, etc.

Inconel 718 is a nickel-based superalloy ideal for applications requiring high strength in the temperature range from cryogenic to 1400¡ãF. Inconel 718 also has excellent tensile and impact strength.

Customized Prefabrication Pipe Spools

Pipe welded with Flanges

Pipe welded with Fittings

Flanges welded with Fittings

The alloy is made up of 50-55% nickel+cobalt (with cobalt limited to 1% max) and 17-21% chromium.

Hastelloy B2 prevents the formation of grain boundary carbide precipitates in the weld heat affected zone, making it suitable for most chemical process applications in the as-welded condition. The heat affected weld zone reduces the precipitation of carbides and other phases to ensure uniform corrosion resistance.
Alloy B2 also has excellent resistance to pitting and stress corrosion cracking.

Their Inconel surface becomes corrosion resistant due to the formation of patina. Incoloy material has a higher iron content and is less expensive than Inconel products. They are also resistant to corrosion from a variety of materials, including steam and acids. These materials are resistant to seawater, acid gas and saltwater environments.

Inconel 600 exhibits cold forming characteristics normally associated with chromium-nickel stainless steels.

625 has outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion.

With the addition of nitrogen as a strengthening agent, the alloy can be dual certified as Alloy 317 (UNS S31700).

This nickel steel alloy has good resistance to heat affected and knife-line zone attack. This alloy also bears the brunt of formic, sulfuric, phosphoric, acetic acids and various other non-oxidizing media.

When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400.

Incoloy 825 is a superalloy with molybdenum and copper added to Incoloy 800. This makes Alloy 825 superior to Alloy 800 in terms of corrosion resistance.

Prefabricated steel s as the name itself sounds, is made of pre engineered steel. Fabrication is done in controlled environment inside the factory and then sent to client location for assembly.

The socket welded tees also make a perpendicular angle between the connected lines. They used for high-pressure applications. In opposition to the butt welded tees, the socket welded tees are utilized in applications where the radius of the pipes are generally smaller. The socket welded tees do not require the beveling process before welding. Therefore, these types of tees are favorable in some applications where branch ends must be kept in the same form before and after the welding.

Alloy 347 stainless steel plate exhibits good general corrosion resistance that is comparable to 304.

Therefore the selected radius of the elbow can be very important. The other type of elbows is reducing elbows. In this type of elbows, the dimension of the center-line radius equals to the half of the nominal size of the larger end. Reducing elbows, again, maintain a 90¡ã flow change in the pipeline system. Moreover, a 180¡ãflow change can also be maintained by using a specific type of reducing elbow that is called ¡®return bends.

The surface edges of the components must be even and the surface impurities must be removed. A beveling process is implemented for the edges of the parts. A grinding machine is employed for the beveling process. The type of grinding machines for beveling differs for stainless steel components and carbon steel components.

Little or no attack occurs at room and elevated temperatures in dry gases, such as chlorine or hydrogen chloride. At temperatures up to 550C in these media, this alloy has been shown to be one of the most resistant of the common alloys.

A fit-up and welding process must be applied after the edge finish of the parts. Therefore, for stainless steel and carbon steel pipe spools, parts can be located onto steel bases or wooden bases. Furthermore, any contact possibility between carbon steel and stainless steel must be minimized.

The outstanding and versatile corrosion resistance of INCONEL 625 alloy under a wide range of temperatures and pressures is a primary reason for its wide acceptance in the chemical processing field.

Alloy 600 is used in chemical and food processing, heat treating, phenol condensers, soap manufacture, vegetable and fatty acid vessels and many more.

Alloy 400/Monel 400 comes directly from refined ore bodies in Canada, and with a copper content of approximately 30 wt%, it provides a lower cost alternative to commercially pure nickel, but still retains a very similar characteristics.

Hastelloy C-276 is the most common corrosion resistant material currently available, but it is not foolproof. Metals should not be exposed to high temperature, strong acid environment. Also, it is easier to work with cold working practices; hot working makes it easier to harden. If hot working, the temperature should be maintained between 1600¡ãF and 2250¡ãF.