Alloy 2205 duplex stainless steel plate

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Duplex stainless steels are considered resistant to stress corrosion cracking because they are not as resistant to this form of corrosion as ferritic stainless steels.

Stub ends are used with lap flanges. Metline is an ISO certified, PED approved duplex 2205 stub end manufacturer and supplier with a manufacturing base in India. We can supply both long and short ends (collars) with test certificate according to EN10204 3.1.

ASTM A790 Duplex 2205 Pipe are precise and used in sensitive applications.

These super duplex fittings products are designed in accordance with national and international standard specifications. These Super Duplex Steel S32750 Seamless Fittings and Super Duplex Steel S32750 Welded Fittings are widely used in various application industries such as automotive, chemical, marine, power plants, heavy engineering, etc.

Alloy 2205 duplex stainless steel plate has better pitting and crevice corrosion resistance than 316L or 317L austenitic stainless steel in almost all corrosive media.

ASTM A182 F51 flanges refer to pipe flanges made from the forged duplex stainless steel grade UNS S31803 for use in pressure systems.

The applications include high corrosive applications including acidic applications due to the material composition.

A182 F51 Duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength, good impact toughness and good overall and local stress corrosion resistance.

Duplex 2507 is a super duplex stainless steel designed for applications which demand exceptional strength and corrosion resistance.

The raised face allows for the flange to have more bolt holes and connection surface while the welded neck grips the pipe in place. The applications are oil and gas, petroleum, petrochemical and other industrial applications.

Duplex 2205 was tested under reverse bending stress at room temperature compared to SS316. The results show that Duplex 2205 has approximately twice the fatigue limit/yield strength.

Also known as standard duplex stainless steel, these 2205 duplex bolts are one of the most widely used stainless steel grades.

Duplex steels have the best resistance to pitting corrosion. This steel has effective fatigue strength to resist corrosion of the steel. The steel can be used in a wide range of heating temperatures in the industry.

Its impact strength or hardness properties inherited from the ferritic side make 2507 stainless steel round bar suitable for structural applications including bridge construction and more.

The duplex steels are one type of stainless steels that have ferritic and austenitic phases in their metallurgic microstructure.

The ASTM A182 F53 UNS S32750 Flange comes under the ASTM A182 specification for high temperature and high pressure services.

Alloy 2205 duplex stainless steel plate is an alloy duplex stainless steel plate containing 22% chromium, 3% molybdenum, and 5-6% nickel nitrogen.

The high chromium, molybdenum, and nitrogen levels provide excellent resistance to pitting, crevice, and general corrosion.

It is a tee fitting with two outlets at a 90¡ã junction to the main line.

2507 has good weldability and workability, and it’s widely used in desalination equipment, chemical process pressure vessels, piping and heat exchangers.

A Super Duplex 2507 Pipe has outstanding resistance to corrosive and oxidative media.

Another advantage of grade 304 stainless steel bar over grade 303 is that it is slightly harder and has better corrosion resistance. Because of this, grade 304 stainless steel bar is used in large quantities in the manufacture of fasteners and fixtures such as nuts, bolts, washers, clips, fittings and clamps. Products made from grade 304 stainless steel in the fastener industry are often referred to as “A2”.

The dual phase steel / super duplex steel stainless steel pipe is a kind of stainless steel with high strength and high corrosion resistance, which has the properties of austenitic stainless steel and ferritic stainless steel. Generally, when the carbon content is low, the Cr content is 18% ~ 28%, and the Ni content is 3% ~ 10%. Some steels also contain Mo, Cu, Nb, Ti, N and other alloy elements.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

These super duplex UNS S32760 round bars are available in a variety of shapes, sizes and diameters depending on the needs and requirements of the application and customer supplied specifications. These super duplex UNS S32760 round bars are resistant to localized corrosion.

Duplex stainless is a mixed microstructure of austenitic and ferrite (50/50) which has improved strength over ferritic and austenitic steel grades with similar corrosion resistance qualities.

Duplex 2205 stainless steel is resistant to chlorides and H2S. Is a problem solver in most industry segments. Duplex 2205 is utilized in heat exchangers and piping in oil and gas, oil refinery, chemical, and petrochemical industry.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

For 2500# in sizes from NPS 1/2 to NPS 12 ASTM A182 UNS S32750 Flanges, with requirements in both metric and U.S. A182 S32750 Flat Flanges for companies involved in Equipment Manufacturing, Oil Refineries, Mining, Chemical manufacturing and Industrial Construction.

Duplex 2205 stainless steel plate has excellent corrosion resistance, much higher than grade 316. It can withstand localized corrosion types such as intergranular, pitting and crevice.

SA 815 S31803 Weld Fittings have exceptional chemical properties along with higher strength and good resistance to corrosion. Therefore this grade is used for fitting manufacturing. SA 815 S31803 Long/ Short Radius Elbow display outstanding resistance to pitting, crevice corrosion and have excellent weldability. They are perfect if one is looking for a sturdy pipe with good formability. ASME B16.9 WPS UNS S31803 Elbow also exhibits excellent resistance to acetic and marine environments.

The round and hollow pipes are usual ones. In addition to the Duplex Stainless Hollow Pipes and the Duplex Steel Round Pipes there are square, rectangular and hexagonal pipes available in the market.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”