Alloy 31 nickel alloy round bar Excellent resistance to corrosion

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

70/30 Copper Nickel round bar has a pressure class of 200 or standard.

Nickel UNS N02200 Rod is a ferromagnetic, commercial purity (99.6%) metal product that exhibits good mechanical properties over a wide temperature range, along with high ductility and resistance to a variety of metals including hydroxides. Excellent resistance to corrosive materials. Nickel 200 alloy bars also showed good hardness levels, about the same as annealed mild steel. Additionally, Nickel 200 round bars can be found in hardened and tempered forms. It is a commercial unalloyed nickel with excellent corrosion resistance and very low resistivity. It also has other properties such as weldability, formability and high tensile strength.

Inconel 718 alloy is a precipitation hardenable nickel-based alloy. It has good ductility in the annealed condition and very high yield, tensile and creep rupture properties at temperatures up to 1300 degrees Fahrenheit.

ASTM B425 UNS N08825 bar stock has a nickel content between 38% and 46% and is able to withstand a moderately high temperature range without affecting its tensile strength.

The Nickel Alloy 718 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Alloy 600 is a popular engineering material for applications requiring heat and corrosion resistance. The alloy’s excellent mechanical properties give this material high strength and good machinability. Good corrosion resistance, especially in alkaline environments, and can be used for low and high temperature service.

Inconel 600 is a nickel-based alloy with excellent carburization and good oxidation resistance at high temperatures. This alloy has long been used in the heat treatment industry for many of the same applications as RA330. Alloy 600 has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Due to the elevated nickel content, alloy 600 is not recommended for use in red hot conditions when sulfur is present.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 601 is an alloy of nickel and chromium. Inconel 601 round bar has excellent strength and excellent corrosion resistance. These rods are sufficient in extreme temperature systems up to 1250 degrees Celsius and do not deform or dissociate easily under any pressure.

Inconel X750 Round Bar has a high strength-to-weight ratio, excellent formability and weldability, and good fatigue resistance.

Inconel 600 threaded rod is Inconel, a common engineering material used in applications requiring corrosion and temperature resistance. The chromium content of Alloy 600 threaded rod makes it greater than commercial pure nickel in rusted conditions. The tensile strength of this bar is Psi 95,000, MPa 655, while the melting point is also discussed Melting point: 1413 C.

The inconel 718 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Incoloy Alloy 800 Round Rods are used in a wide range of applications such as nitric acid catalyst supports, reformer outlet pigtails and manifolds, heat exchangers, pressure vessels and dampers. Our products are developed through market research and are sustainable in changing market trends. Incoloy 800 Bars is another nickel-chromium alloy that is resistant to high temperatures and corrosion.

Incoloy 800 Bars is another nickel-chromium alloy that is resistant to high temperatures and corrosion.

Hastelloy G30 Hastelloy alloy is widely used in phosphoric acid equipment, sulfuric acid equipment, nitric acid equipment, nuclear fuel reprocessing

Inconel 718 is a nickel-chromium precipitation hardening alloy that maintains good ductility and high strength at temperatures up to 1300°F.

Like other nickel alloys, HASTELLOY C-22 alloy is fairly ductile, has excellent weldability, and is easily fabricated into industrial parts. It is available in sheet, sheet, strip, billet, bar, wire, tube and tube. Typical applications may include: reactors, heat exchangers and columns.

Some applications suitable for Inconel 625 include seawater, aerospace and chemical processing. About Seawater Inconel 625 is a common choice due to its excellent corrosion resistance, fatigue strength and high tensile strength. Not to mention its strong resistance to chloride ion stress corrosion cracking. Propeller blades, subsea motors, and subsea cable sheathing are good applications for Inconel 625, where the bar becomes wire once it passes through a certain minimum diameter, in which case the wire can be used for mooring cables.

ASTM B408 Incoloy 825 bar will remain stable with prolonged exposure to elevated temperatures. It will also avoid corrosion in many aqueous environments, where molybdenum also helps resist pitting and crevice corrosion.

Alloy 625, commonly known as Inconel 625, is a nickel-chromium-molybdenum-niobium alloy (NiCr22Mo9Nb).

Hastelloy c276 round bars are ideal for general corrosion resistance based applications, but ASTM B574 designated bars are a low carbon based alloy that is very popular in the chemical processing industry.

Incoloy 800 is a nickel, iron and chromium based alloy. Incoloy 800 bar is not only known for its good strength, but also has excellent resistance to oxidation and carburization when exposed to high temperatures. Two additional alloys can be derived from Incoloy 800. They are Incoloy 800H and Incoloy 800HT.

Alloy 400 has excellent resistance to neutral and alkaline salts. It has been the standard material in salt mills for many years.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.

926 is an austenitic stainless steel alloy with a chemical composition similar to alloy 904L with 0.2% nitrogen and 6.5% molybdenum. Molybdenum and nitrogen contents significantly improve pitting and crevice corrosion resistance in halide media. At the same time, nickel and nitrogen not only ensure the stability of the metallographic phase, but also reduce the tendency of intergranular segregation during thermal process or welding process better than nitrogen content. Nickel alloy. 926 has exceptional corrosion resistance in chloride ion media due to its excellent localized corrosion resistance and 25% nickel alloy content.

Alloy C276 bar welding products are used as a matching composition filler material for welding C276 alloy forged and cast products in dissimilar welding applications including other NiCrMo alloys and stainless steels, as well as for surfacing or cladding of steel. Parts thermoformed in HASTELLOY C-276 alloy bar should, if possible, be solution heat treated prior to final fabrication or installation.

Incoloy 800 was produced as early as the 1950s, but at that time, nickel was not widely used, so it was really only used in special cases when producing certain steels. This grade has high temperature strength and resistance to carburization, oxidation and other high temperature corrosion.

ASTM B446 UNS N06625 bright bar has excellent strength and toughness in the temperature range from low temperature to high temperature such as 2000¡ãF. In addition to high tensile strength, this Inconel 625 ingot has a high degree of formability and better weldability than many other high alloyed nickel-based materials.

Stainless steel is a versatile alloy is considered to be amongst the most widely used metals across the world.Stainless Steel A403 WP304 contains higher chromium and low carbon content.

The advantages and disadvantages of copper-nickel alloys are that pure copper plus nickel can significantly improve strength, corrosion resistance, hardness, electrical resistance and thermoelectricity, while also reducing the temperature coefficient.

The high performance alloy Inconel 718 round bar inherently derives many good properties from nickel. Inconel 718 bar falls within the scope of the ASTM B637 specification, which in turn covers nickel-based hot-worked and cold-worked precipitation hardening alloys.