Alloy 31 nickel alloy round bar Excellent resistance to erosion in phosphoric acid media

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

K-500 is characterized by high corrosion resistance and is an ideal alloy for use in marine environments where constant contact with salt water is required.

Inconel 600 threaded rod is Inconel, a common engineering material used in applications requiring corrosion and temperature resistance. The chromium content of Alloy 600 threaded rod makes it greater than commercial pure nickel in rusted conditions. The tensile strength of this bar is Psi 95,000, MPa 655, while the melting point is also discussed Melting point: 1413 C.

Alloy steels have added alloying elements such as manganese and nickel. These elements increase the strength, hardness and toughness of metals. Added elements make alloy steels ideal for demanding industrial applications.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 718 is often used in gas turbine components and cryogenic storage tanks. Jet engines, pump bodies and parts, rocket engines and thrust reversers, nuclear fuel element gaskets, hot extrusion tools. Other popular uses are high-strength bolted connections and downhole shafting.

The Inconel 601 Square Bar possesses superior mechanical properties.

Inconel 718 is a chromium and nickel based alloy with additional amounts of titanium, niobium, iron, molybdenum and aluminum. This alloy has high mechanical strength and durability to withstand extreme environmental conditions. Inconel 718 round bar has excellent resistance and solderability. These bars have excellent overall corrosion resistance in high temperature and high pressure applications.

Incoloy 800H round bars are also known for their resistance to oxidation and carburization, even at high temperatures. This means that these bars are ideal for high temperature applications. This feature has made Incoloy 800HT round bars popular in the petrochemical industry. The presence of nickel in the alloy contributes to its resistance to chloride stress corrosion cracking, which is indeed an essential feature of alloy 800h rods.

ASTM B446 UNS N06625 bright bar has excellent strength and toughness in the temperature range from low temperature to high temperature such as 2000¡ãF. In addition to high tensile strength, this Inconel 625 ingot has a high degree of formability and better weldability than many other high alloyed nickel-based materials.

Alloy 400’s alkali resistance makes it ideal for deployment in highly acidic environments such as salt water, sulfuric acid or hydrofluoric acid.

Hastelloy C22 bar contains a high amount of nickel-molybdenum-chromium superalloy as well as tungsten and is designed to provide excellent corrosion resistance in a wide range of harsh environments. It is very resistant to corrosion in immersion environments and is used for chemical applications in the as-welded state.

Incoloy 800 is a nickel, iron and chromium based alloy. Incoloy 800 bar is not only known for its good strength, but also has excellent resistance to oxidation and carburization when exposed to high temperatures. Two additional alloys can be derived from Incoloy 800. They are Incoloy 800H and Incoloy 800HT.

Nickel Alloy Inconel 625 | UNS# N06250 is a nickel-based superalloy with high strength properties, high temperature resistance, and significant oxidation and corrosion protection. Nickel alloy Inconel 625 shows the ability to withstand high stress environments and has excellent machinability.

Alloy 625 (UNS N06625) can be used in round bar, flat bar, extruded section, tube, tube, plate, sheet, strip, plate, hexagon, forging, extruded section and wire. View stock listings, sheet stock listings or contact sales for more availability.

Monel is particularly resistant to hydrofluoric and hydrochloric acid. It may be slightly magnetic at room temperature. Monel is more resistant to corrosion than nickel under reducing conditions and more resistant than copper when oxidized.

The chemical composition of Incoloy 825 alloy includes nickel, chromium and iron as well as titanium, copper and molybdenum. Incoloy 825 round bar is popular for its high resistance in many chemically aggressive environments.

High nickel content ensures resistance to stress corrosion cracking, combined with molybdenum and copper provides strong resistance to reducing environments such as sulfuric and phosphoric acid, chromium to resist oxidizing environments such as nitric acid, titanium to inhibit intergranular corrosion, and overall resistance to pitting and crevice corrosion.

Nickel 800 cold rolled bars run on the die shortly after the hot rolling process, allowing the bars to exhibit exceptional strength and excellent surface finish. Alloy 800 Bright Bar is an aesthetically appealing grade that can be produced in different finishes and sizes.

Alloy 718 is a precipitation hardening nickel-chromium alloy containing large amounts of iron, niobium and molybdenum, and small amounts of aluminum and titanium. It is sometimes called a “super alloy”.

Hastelloy C276 alloy hollow rods tend to exhibit excellent resistance to localized corrosion and oxidizing media as well as reducing media.

Hastelloy C276 grade round bars can be used in FGD systems due to their excellent resistance to sulfur-containing compounds and chloride ions encountered in most scrubbers. Alloy C276 Hastelloy bar also has excellent resistance to localized corrosion such as pitting, and the alloy is resistant to stress-related corrosion cracking. Hastelloy C276 N10276 Bright Bar is also one of the few materials that can withstand the corrosive effects of chlorine in the form of wet chlorine gas, hypochlorite and chlorine dioxide.

Improvements in alloy metallurgy, melting techniques and thermomechanical processing led to the development of Alloy 31, a relatively low cost alloy with high corrosion resistance.

EN31 alloy steel rods are basically used as connections between intermediate pipes, while EN31 steel rods are ordinary carbon and chrome steels with good ductility.

Nickel UNS N02200 Rod is a ferromagnetic, commercial purity (99.6%) metal product that exhibits good mechanical properties over a wide temperature range, along with high ductility and resistance to a variety of metals including hydroxides. Excellent resistance to corrosive materials. Nickel 200 alloy bars also showed good hardness levels, about the same as annealed mild steel. Additionally, Nickel 200 round bars can be found in hardened and tempered forms. It is a commercial unalloyed nickel with excellent corrosion resistance and very low resistivity. It also has other properties such as weldability, formability and high tensile strength.

INCONEL alloy 718 is ideal for use in these circumstances.Inconel 718 can be easily machined and elongated by 30%.

Although the material has good tensile strength at moderately high temperatures, the use of Incoloy 800 round bar at elevated temperatures results in a reduction in its tensile strength. However, like most austenitic stainless steel alloys, UNS N08811 bright bar has proven to be a useful asset, especially in environments with high levels of corrosive media.

In addition to high ductility, the material shares several other characteristics with nickel. For example, ASTM B164 Monel 400 round bar is well suited to work in moderately reducing applications because nickel works very well in reducing environments.

Inconel 625 bar is typically part of the types of equipment used in marine applications such as heat exchangers, fasteners and cable jackets.

Incoloy 800 was the first alloy as Incoloy 800H was slightly changed. To improve stress fracture properties, adjustments were made to control carbon and grain size.

Alloy 600 is a nickel-chromium-iron alloy used in applications requiring corrosion and heat resistance. This alloy has excellent mechanical properties and exhibits an ideal combination of high strength and good machinability over a wide temperature range.

Inconel 625 round bars are also used in nuclear reactors, combustion systems, rocket thrust chamber tubes, transition liners, compressor blades, turbine seals, and more. It has excellent formability and solderability due to its high nickel content. 625 Round Bar has excellent resistance to a variety of acidic environments such as nitric, sulfuric, hydrochloric and phosphoric environments. In addition, they provide protective properties, surrounded by alkali metals.