Alloy 31 nickel alloy round bar for sour gas applications in the oil and gas industry

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Alloy C276 bar welding products are used as a matching composition filler material for welding C276 alloy forged and cast products in dissimilar welding applications including other NiCrMo alloys and stainless steels, as well as for surfacing or cladding of steel. Parts thermoformed in HASTELLOY C-276 alloy bar should, if possible, be solution heat treated prior to final fabrication or installation.

The alloy 601 also has good resistance to aqueous corrosion.

Similar to other Inconel alloy grades, the base element of alloy Inconel 625 spring steel bars is nickel. UNS N06625 / W.Nr. 2.4856, also known as Nickel Alloy 625 Hot rolled bar is an alloy of nickel and chromium with the addition of molybdenum and niobium.

Another important feature of Inconel 625 bar is its enhanced corrosion resistance. UNS N06625 Bar is resistant to a wide range of severe corrosive environments.

One of the most important characteristics of Monel 400 is that stress corrosion cracks do not occur in general, and the cutting performance is good. The structure of Monel 400 is single phase solid solution with high strength.

The main applications for the engineering grades 90-10 and 70-30 copper-nickel alloys are in seawater piping, heat exchangers and condensers.

Inconel 625 round bar is a nickel-chromium-molybdenum-based alloy. This makes it very good at resisting non-oxidizing environments. They are widely used in the manufacturing sector of the economy.

INCONEL alloy 718 is ideal for use in these circumstances.Inconel 718 can be easily machined and elongated by 30%.

Hastelloy C-276 has superior resistance to localized corrosion as well as oxidizing.C276 alloy is suitable for many chemical process applications.

One of the benefits of using 2.4858 Incoloy 825 round bar is its high corrosion resistance. Incoloy 825 has a high content of nickel and a very stable austenitic structure. This high nickel content in Incoloy 825 alloy bars provides good resistance to chloride ion stress corrosion cracking.

Alloy 625 is a nickel-chromium alloy with high strength, excellent machinability and excellent corrosion resistance. Operating temperature ranges from cryogenic to 1800¡ãF. The strength of Alloy 625 is derived from the hardening effect of molybdenum and niobium on its nickel-chromium matrix; therefore, precipitation hardening is not required. This combination of elements also provides excellent resistance to a variety of unusually severe corrosive environments as well as high temperature effects such as oxidation and carburization.

Alloy 600 is a nickel-chromium-iron alloy characterized by: good mechanical properties at low, room and high temperature, very good resistance to stress corrosion cracking, even at high temperature, high temperature corrosion resistance to dry chlorine and hydrogen chloride Good resistance and good resistance to oxidation, carburization and nitriding.

The ease and economy with which INCONEL alloy 718
can be fabricated, combined with good tensile, fatigue,
creep, and rupture strength, have resulted in its use in a
wide range of applications.

Inconel X750 is a nickel-chromium alloy that has been used for both wrought products and castings. Inconel X750 offers excellent resistance to corrosion and oxidation along with high strength and good toughness properties at elevated temperatures.

Inconel 601 is an alloy composed of nickel and chromium.

Nickel 201 round bars can be found in hardened and tempered forms. It is a commercial unalloyed nickel with excellent corrosion resistance and very low electrical resistivity. These alloy 201 round bars are resistant to the corrosive effects of most media and are immune to severe corrosion types such as pitting and crystallites intercorrosion. Due to the low carbon content of Nickel 201 Flat Bar, LC-Nickel 99.6 exhibits high resistance to caustic-induced corrosion even at high temperatures.

Round bars are widely used in the machining industry due to their ability to be easily machined and cut. One of the most impressive properties of stainless steel is chromium, which makes it extremely resistant to corrosion. Stainless steel round bars can be found in the food industry, automotive components and machine parts in the manufacturing and construction industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 601 is a nickel-chromium alloy with strong oxidation resistance at 2200¡ãF. Alloy 601 produces a tightly adherent scale that resists spalling even under severe thermal cycling. The alloy has good high temperature strength and retains its ductility after prolonged use. Alloy 601 has good resistance to hot corrosion under oxidizing conditions. Alloy 601 is not recommended for strongly reducing sulfur-containing environments.

The microstructure of Inconel 718 will not separate alloying elements in the heat affected zone or cause welding difficulties due to cracking.

Monel 400 is a kind of corrosion resistant alloy with large dosage, wide use and excellent comprehensive performance. Monel 400 has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.

Alloy 625 is especially useful where oxidation resistance and pitting avoidance are required. In the annealed condition, this Inconel is fully austenitic and suitable for machining. Due to its high alloy content, it provides excellent corrosion resistance in a variety of severely corrosive environments. With a nickel content of nearly 60%, it is virtually immune to stress corrosion cracking.

Alloy 600 is a nickel-chromium-iron alloy used in applications requiring corrosion and heat resistance. This alloy has excellent mechanical properties and exhibits an ideal combination of high strength and good machinability over a wide temperature range.

The Monel400 bar is a nickel-copper alloy (about 67% ni-23% Cu) that is resistant to seawater and steam as well as salt and corrosive solutions at high temperatures.

Alloy 625 rods are commonly used in oil and gas production where hydrogen sulfide and elemental sulfur are present at temperatures in excess of 150 degrees Celsius. These Nickel 625 round bars are very resistant to seawater under flowing and stagnant conditions as well as under fouling conditions.

Hastelloy C276 alloy hollow rods tend to exhibit excellent resistance to localized corrosion and oxidizing media as well as reducing media.

Inconel 625 round bar is extremely corrosion resistant in a variety of extremely corrosive environments.

INCONEL Alloy 718 (UNS N07718/W.Nr. 2.4668 ) is a high strength, high temperature and corrosion resistant nickel-chromium alloy. It is suitable for use in low temperatures and in air up to 1300 F. The alloy is easy to work and can be age hardened.

Alloy 600 is a popular engineering material for applications requiring heat and corrosion resistance. The alloy’s excellent mechanical properties give this material high strength and good machinability. Good corrosion resistance, especially in alkaline environments, and can be used for low and high temperature service.

Inconel 625 Bars For excellent machinability, these bars are equipped with low cutting speeds, heavy equipment, ample coolant, rigid workpieces and tooling. One thing to keep in mind about these bars is that it does work harden quickly, so intermediate annealing can be used for complex part forming operations.