Alloy 718 round bar 2.4668 steel round bar N07718 grinding machine steel bar

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 718 flanges have good machinability and excellent weldability with or without filler metal added. Inconel 718 Pipe Flanges are available in a variety of sizes, gauges and thicknesses.

Alloy 625 rods are commonly used in oil and gas production where hydrogen sulfide and elemental sulfur are present at temperatures in excess of 150 degrees Celsius. These Nickel 625 round bars are very resistant to seawater under flowing and stagnant conditions as well as under fouling conditions.

ASTM B446 UNS N06625 bright bar has excellent strength and toughness in the temperature range from low temperature to high temperature such as 2000¡ãF. In addition to high tensile strength, this Inconel 625 ingot has a high degree of formability and better weldability than many other high alloyed nickel-based materials.

Annealing softening begins at approximately 1600¡ãF (871¡ãC) and is fairly complete after 10 to 15 minutes of heating at 1800¡ãF (982¡ãC). Above this temperature, grain growth can be objectionable, although very brief heating at 1900¡ãF will result in complete softening without excessive grain growth. Since the cooling rate has no effect on softening, the material can be water quenched or air cooled.

ASTM B564 Nickel Alloy 200 Threaded Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

HT PIPE become one of the leading and most trusted manufacturers and suppliers of ASME SB564 Inconel Grade 625 Flanges in Mumbai, India By supplying the highest quality products to our customers. We are Offering reasonable prices incorporating large discounts against a range of Inconel Alloy 625 Flanges.

Inconel 625 round bars are also used in nuclear reactors, combustion systems, rocket thrust chamber tubes, transition liners, compressor blades, turbine seals, and more. It has excellent formability and solderability due to its high nickel content. 625 Round Bar has excellent resistance to a variety of acidic environments such as nitric, sulfuric, hydrochloric and phosphoric environments. In addition, they provide protective properties, surrounded by alkali metals.

Inconel 718 or Alloy 718 is the most commonly used hardenable Inconel nickel alloy grade. Due to its precipitation hardening and its main nickel and chromium components, this alloy has a combination of excellent corrosion resistance and high strength even at high temperatures.

Inconel is an austenitic superalloy whose main alloying materials are nickel and chromium. This nickel based ASTM B166 Inconel 600 gasket is designed for applications ranging from low temperatures to high temperatures up to 2000¡ãF. The main feature of these alloy 600 screws is their enhanced corrosion resistance and high temperature resistance. The increased tensile strength of Inconel 600 is enhanced by solid solution strengthening.

The Inconel 600 Seamless Pipes have many features like good workability, durability, readily weldable, high strength and mechanical property as well. There are various types of Inconel 600 pipes are available such as welded, seamless, square, rectangular, thick wall, thin wall, electro polished, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel alloy 601 rods consist of 58-63% nickel. Inconel is a general purpose nickel-chromium-iron alloy. It is popular as an engineering alloy and 601 is best suited for applications requiring heat and corrosion resistance.

Its outstanding strength and toughness in temperature ranges from cryogenic temperatures to high temperature up to 2000¡ã F (1093¡ã C) are derived primarily from the solid solution effects of the refractory metals Columbium and molybdenum in a nickel-chromium matrix.

Alloy 600 reducer is a blend of Nickel Chromium and Iron that provides a standard material for chemical manufacturing and the automotive machine, airframe and aircraft engine segments.

Also known as Alloy 625, Inconel 625 hex bolts are known for their ability to retain their strength and resist heat ¨C both in and out of corrosive environments. The presence of nickel and chromium make Inconel 625 hex bolts corrosion, oxidation and carburization resistant. The molybdenum delivers excellent fatigue strength and resistance to stress, pitting and crevice corrosion cracking even when exposed to chloride ions.

At elevated temperatures the annealed and solution annealed alloy shows good resistance to scaling and has high strength. The alloy also resists ammonia bearing atmospheres, as well as nitrogen and carburizing gases.

The Nickel Alloy 601 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Inconel 718 Nut is an age-hardening nickel-chromium-based superalloy ideal for extreme environments where oxidation and corrosion resistant bolts are required, even when subjected to pressure and high temperatures. 718 nuts are twice as strong as Inconel 625 nuts and are known for their high yield strength and 1800¡ãF availability. Inconel 718 nuts are often chosen by the industry for their high temperature strength capabilities, it also provides strength and ductility at low temperatures.

At elevated temperatures the annealed and solution annealed alloy shows good resistance to scaling and has high strength.

By itself, nickel has great heat resistance properties, but when alloyed with other elements, it gains many properties, just like in the case of the Inconel 600 Flanges. HT PIPE is a leading supplier and manufacturer of the Inconel 600 Flanges in different shapes, types and scales. The flanges come in different varieties such as GOST flanges, JISB2220, BS1560-3.1 and so on. The pressure ranting of the flanges vary from class 1500 to class 600.

Alloy 600’s high chromium content makes it significantly more resistant to oxidation than pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
This alloy has a high level of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.

HT PIPE was the company who was awarded the order to supply Inconel 600 Flanges & Pipe Fittings by Oil Corporation.

The reason ASTM B637 UNS N07718 bolts are ideally chosen for the manufacture of turbine engines. Since a turbine engine operates on basic thermodynamic principles, the efficiency of a turbine engine increases as the turbine inlet temperature increases.

It has very good resistance to stress corrosion cracking Due to the control of carbon content and grain size, 601 has high creep rupture strength, so 601 is recommended for use in areas above 500 ¡ãC.

Inconel 601 (N06601) Nickel-based alloy plasticity machinability.

The alloy 601 also has good resistance to aqueous corrosion.

This nickel alloy is used from cryogenic temperatures up to long term service at 1200¡ã F.

Inconel 718 fasteners are corrosion resistant and of high quality. These fasteners also exhibit heat and corrosion resistance under extreme conditions. To increase the yield strength for plastic deformation, the forming equipment should be strong and sufficiently powered. Inconel 718 has high temperature machining characteristics. Inconel 718 alloy is joined by many typical processes.

Alloy 600 / Inconel 600 is combination of Nickel Chromium and Iron providing a standard material for the chemical industry and the automotive engine, aero engine and airframe sectors.

Inconel 600 bolts can be stretched up to 40% and still have excellent machinability. This Alloy 600 bolt has excellent creep rupture performance at elevated temperatures. These bolts are widely used in the petrochemical, chemical and natural gas industries.

Inconel 600 pipe is a chromium-nickel alloy designed for use at temperatures up to 2000 F and down to as low as cryogenic levels. The alloy is resistant to reducing environments as well as chloride stress corrosion cracking due to its nickel content and resistant to weaker oxidizing conditions through its chromium content. Alloy 600 seamless nickel pipe is an austenitic alloy with high nickel content that is non-magnetic and has excellent mechanical properties at both elevated temperatures and cryogenic temperatures. Werkstoff NR 2.4816 Pipes have common applications in gas turbine blades, seals, and combustors, and turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, and so on. We are manufacturer, stockiest and exporter of ASTM B829 Inconel 600 Seamless Pipe and we offer these pipes in custom-made sizes and thicknesses, as per the exact demands of our admired clients.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20