alloy 800 NCF 800 special metals steel billet

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The point to note with the higher carbon version of the Incoloy 800H that the modified alloy comes with improved elevated temperature properties.

Bolts and Nuts fall under the ASTM B166 specification for hot and cold work Inconel 600 bar, bar bolts and nuts. Standards vary from DIN, ASTM, BS and all other international standards. Inconel 600 fasteners can vary in length from custom lengths and 3mm to 200mm, and also in sizes from M3 to M56 and 3/6″ to 2″. There are different types of bolts and nuts in Alloy 600 Fasteners such as T-Nuts, Panel Nuts, Coupling Nuts and Lag and Hex Bolts.

Incoloy 825 weld neck flange Incoloy 825 Flanges (UNS N08825) is composed of addition of molybdenum, copper, and titanium into its nickel-iron-chromium base. The extra metals give Incoloy 825 Blind Flange exceptional resistance against corrosion, even more so than other nickel alloys.

Incoloy 800H is a high carbon grade of these 800 alloys. These alloys exhibit excellent resistance to post-weld carburization and graining. They remain ductile for extended periods of time at temperatures below 700 degrees Celsius.

Incoloy 825 alloy pipe is made from basic elements such as iron, nickel and chromium, which provide basic rust and pitting resistance at ambient temperatures. This alloy has elements such as molybdenum, titanium and copper added in small parts, adding more to the product and increasing its machinability even in marine conditions.

SB564 UNS N02200 Flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

ASTM B705 Alloy 825 Welded Pipe Radioactive Waste Stream and Nuclear Fuel Reprocessing. Typically, nuclear power plants and radioactive processing plants release high thermal energy.

The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase.

Incoloy 800HT Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 plate is resistant to chloride ion stress corrosion cracking. Nickel 800 plate is also used in chemical and petrochemical processing. Nickel 800 plate is available in any length, cut to order or machined to customer requirements.

Incoloy 800 is an alloy with a higher content of iron. Due to the alloy having a higher content of ferrous, and lower content of nickel, the cost of Inconel 800 becomes low.

Alloy 925 / Incoloy 925 / UNS N09925 is an age-hardenable nickel-iron-chromium alloy with additions of molybdenum, copper, titanium and aluminum. Each of these additions plays their part in making Alloy 925 a high strength alloy with excellent corrosion resistance. Alloy 925 is used in a variety of applications in the crude oil and natural gas industries because of its resistance to sulfide stress cracking and stress corrosion cracking, making it the perfect alloy for downhole and surface gas well components.

High nickel content ensures resistance to stress corrosion cracking, combined with molybdenum and copper provides strong resistance to reducing environments such as sulfuric and phosphoric acid, chromium to resist oxidizing environments such as nitric acid, titanium to inhibit intergranular corrosion, and overall resistance to pitting and crevice corrosion.

ASTM B564 Incoloy 825 Flanges Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

Alloy 825 (UNS N08825) is an austenitic nickel-iron-chromium alloy with additions of molybdenum, copper and titanium.

Although the material has good tensile strength at moderately high temperatures, the use of Incoloy 800 round bar at elevated temperatures results in a reduction in its tensile strength. However, like most austenitic stainless steel alloys, UNS N08811 bright bar has proven to be a useful asset, especially in environments with high levels of corrosive media.

Incoloy 825 weld neck flange Alloy 825 Flanges also offer good mechanical features. The flanges produced by us are said to be sturdy and leakproof. They have a melting point of 1413 degrees C. and a density of 8.47g/cm3.

This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties.

Incoloy 800 or also referred to as UNS N08800, nickel 800 has excellent resistance properties to chemicals as well. Renowned for its high tensile strength at elevated temperatures, Alloy 800 also resists oxidation, carburization as well as other types of high-temperature corrosion.

ASTM B564 UNS N08825?offers good mechanical properties at room temperature as well as at high temperatures.

Incoloy A-286 stud bolt is a Fe-25Ni-15Cr base superalloy reinforced by molybdenum, titanium, aluminum, vanadium and trace boron. It has high yield strength and durability, creep strength below 650 ¡æ, good processing plasticity and satisfactory welding performance. Incoloy A286 is a Fe-25Ni-15Cr based superalloy reinforced with additions of molybdenum, titanium, aluminum, vanadium and trace amounts of boron. It has high yield strength, durability and creep strength, good workability and good weldability at 650¡æ.

The flanges produced by us are said to be sturdy and leakproof.

Alloy C-276 is one of the most versatile corrosion-resistant alloys available today.

Nickel 200 flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Chemically, Incoloy fasteners are composed of nickel, iron and chromium as the primary alloy materials. In addition to these elements, trace amounts of molybdenum, copper and titanium are added to the B425 N08825 alloy. Components made from this alloy, including various Inconel 825 bolts and nuts, are less prone to deformation. This is because the alloy has a stable FCC microstructure. Like many conventional austenitic grade stainless steels, Alloy 825 threaded rod has a stable austenitic structure.

One of the main benefits of using nickel alloys is that they tend to be resistant to high temperatures. ASTM B425 UNS N08825 bar stock has a nickel content between 38% and 46% and is able to withstand a moderately high temperature range without affecting its tensile strength. This property is particularly useful in applications involving nuclear fuel reprocessing, where Incoloy 825 Square bar is considered a value-add. In nuclear reprocessing, the process involves separating chemicals such as fission products and excess uranium from spent nuclear fuel.

Incoloy 800HT seamless pipe is available up to 8″ NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT tubing is available up 3″ OD. Incoloy 800HT redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Inconel 926 bolt material meets ASTM B446, B564, F467, F468, UNS N06926, DIN EN 2.4856, AMS 5666 and BS 3076 specifications and is adequate for high strength, corrosion resistance and high temperature applications up to 1000o C (1800o F).

Nickel Alloy DIN 2.4066 Slip on Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

We offer high quality Incoloy 825 rods in a variety of material grades, gauges and sizes. Our high-grade Incoloy 825 rods offer outstanding features such as robust design, cost-effectiveness, durability and an excellent finish.