Alloy A193 B7 A194 2H Washers heat-treated chromium-molybdenum low-alloy steel washers

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

SA182 F5 Plate Flange can be used in those environments where there is a presence of mild corrosive compounds. It can also be used in non-corrosive applications as well as in erosive applications at the temperature between ranging between -30oC up to +650oC. ASTM A182 Grade F5 Flanges in conditions characterized by increased levels of carbon dioxide (CO2), hydrogen sulphide (H2S), and as well chlorides (Cl). The highlight of A182 F5 Steel Slip On Flanges are Precise plan, Accurate measurements, Resistant to corrosion, Less costs, pitting and crevice resistance.

WPHY 52 chemical composition includes metals like Manganese, aluminium, phosphorus, sulphur, vanadium, silicon, nickel, titanium, chromium, molybdenum and copper.A few other moved forward ASTM A860 WPHY 52 properties are its expanded solidness, expanded sturdiness, moved forward weldability, great resistance to hydrogen stretch breaking and its exact measurement.

We offer a comprehensive line of ASTM 335 alloy steel pipe and tubing, known for superior quality and unmatched durability. They are available in different sizes, grades, sizes and shapes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.22

Due to the chemical composition of Molybdenum (Mo) and Chromium (Cr), A335 is often referred to as Chromium Molybdenum Tube. Molybdenum increases the strength of the steel as well as the elastic limit, wear resistance, impact quality and hardenability. Molybdenum increases resistance to softening, inhibits grain growth, and makes chromium steel less susceptible to embrittlement. Molybdenum is the most effective single additive for improving high temperature creep strength. It also enhances the corrosion resistance of the steel and inhibits pitting corrosion. Chromium (or chrome) is the basic component of stainless steel. Any steel with 12% or more chromium is considered stainless steel. Chromium is almost irreplaceable in terms of resistance to oxidation at high temperatures. Chromium increases tensile, yield and hardness at room temperature.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P99

Production of low alloy steel materials of different specifications. A335 is a specification for seamless ferritic alloy steel pipes. These alloy steel seamless pipes are used for high temperature service. There are also high alloy steel materials. There are different grades in this material specification. There are grades P1, P2 to P91 and P92. The most commonly used grades are p5, p9, p11, p22, p91 and p91.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P136

Monel 400? sheet is available in thicknesses ranging from .018 to .140″.Butt-weld and forged fittings are available or can be manufactured with short lead times.

While each variation of Inconel has unique traits that make it effective in different circumstances, the majority of the alloys are used frequently in the chemical industry.Its welding characteristics,
especially its resistance to postweld cracking, are
outstanding

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

When the F11 flange is heat treated, the alloy steel F22 flange is formed. These flanges have a tensile strength of 655 MPa and a yield strength of 517 MPa.

High alloy steel and low alloy steel are two types of alloy steel. Low-alloy steel pipes consist of pipes with an alloying percentage of less than 5%. The alloy content of high alloy steels varies from 5% to about 50%. Similar to most alloys, the working pressure capacity of alloy steel seamless pipe is about 20% higher than that of welded pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.64

A weld neck flange, also called a tapered hub flange or high-hub flange, is a kind of flange that can relocate stress to the pipes, ensuring a decrease in high-stress concentration at the bottom of the flange.

Chromium Molybdenum Alloy Steel or Chromium Molybdenum, CrMo is an alloy steel used for high temperature and high pressure service. Chromium molybdenum is used in power generation and petrochemical industries for its tensile strength, corrosion resistance and high temperature strength. Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

The range of pipe diameters of A335 that can be tested by each method should be limited by the respective scope of practice. The different mechanical testing requirements for pipes, i.e. transverse or longitudinal tensile tests, flattening tests, hardness or bending tests, are presented.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.22

Grade B7 is a heat treated chromium molybdenum low alloy steel with a minimum tensile strength requirement of 125 ksi (860 Mpa), a yield strength of 105 ksi (720 Mpa) and a maximum hardness of 35HRC. Boltport produces B7 headed and headless bolts from alloy steel AISI 4140 bar stock or forgings. A193 Grade B7 is the most commonly used bolting size, plus A194 Grade 2H nuts are used for bolting carbon steel pipe. A193 B7 bolts are available in metric sizes from M6 to M180 and imperial sizes from 1/4 to 7 inches in diameter.

Manufacturers must adhere to the chemical composition used to produce ASTM A182 F11 Class 2 equivalent grades. Alloy Steel Different alloying agents used in ASTM A182 F11 RTJ flanges, such as phosphorus, silicon, nickel, carbon, manganese, chromium, molybdenum, niobium, titanium, improve fitting performance.

ASTM A193 Grade B7 bolts are considered for applications up to 450¡ãC due to heat treated chrome molybdenum steel. B7 stud bolts are bolts with male threads and a hex head designed to be actuated by a wrench. It can be fully threaded or partially threaded and is supplied with a hex cap.

These continuous ¨C annealing furnaces in Alloy Steel Grade F12 RTJ Flanges are usually heated by gas ¨C fired radiation tubes in order to separate combustion gases from the inert atmosphere surrounding the strip. Alloy Steel F12 Flanges has applications in many industries such as petrochemical, oil and gas, bulk liquid transportation, pharmaceuticals, chemical, pulp and paper manufacturing, power generation, textiles and others.

Products made from alloy steel perform far better than those made from carbon steel. Although they are less expensive than stainless steel grades, they are less resistant to corrosion than stainless steel but more resistant than carbon steel pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.67

Alloy A182 flange also has durability and longevity.

Alloy Steel F12 Flanges are made up of a chromium molybdenum alloy consisting chromium in a range of 20% to 40% depending on the grading. Also, for Alloy Steel F12 Flanges, there several excellent properties the product is having that is making it the best choice for various critical applications.

The Welding neck flanges are available across various materials. These materials will have to be as per the Standards set. The materials also should be as per the quality specified by the ASTM or ASME standards.

Alloy Steel A182 F12 Flanges has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric, and nitric acids. Alloy Steel F12 Blind Flanges also possesses a great resistance to pitting in chloride solutions, a great resistance to crevice and stress corrosion cracking.

We feel proud to introduce ourselves as the well-known manufacturers, exporters and suppliers of Alloy Steel F21 Flanges.

A335 grade P5, P9, P11, P12, P22, P91 alloy steel seamless tube packaging will be in accordance with international standards, strapped into bundles with tape and loaded into containers to avoid any damage.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P103

ASTM A182 F11 class 1 Flange is the method of connecting two pipes, pumps and valves. This consists of chromium molybdenum based alloy steel grade.

Alloy steel sounds like: steel that contains a specific amount of alloying elements. Generally, alloying elements make steel stronger and more resistant to shock or stress. While the most common alloying elements include nickel, chromium, molybdenum, manganese, silicon and copper, many other alloying elements are also used in the production of steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.42

Adding nickel adds toughness to the alloy. Similarly adding chromium to chrome moly flanges aids in enhancing other mechanical properties such as temperature strength, hardness, as well as corrosion resistance.

A182-F11 is an American standard pearlitic structure heat-resistant steel forgings, the execution standard: ASTM-A182/A182M-2017.

ASTM A182 Grade F5 Flanges are suitable for connecting pipes of small bore size and without the requirement of welding. ASTM A182 GR F5 Flange belongs to the ASTM A182 specification. The dimensions of the flanges vary according to the ANSI, ASME and DIN standards. The flange sizes range from ? inches to 36 inches in nominal bore sizes. Navstar Steel is a leading supplier and manufacturer of these flanges in various sizes and types.

Alloy steel is a steel alloyed by adding a variety of elements with a total amount between 1.0% and 50% in order to improve its mechanical properties. Alloy steels are divided into two categories: low alloy steels and high alloy steels. The distinction between the two is debatable. Smith and Hashemi defined the difference as 4.0%, while Degarmo et al. defined the difference as 8.0%. Most commonly, the phrase “alloy steel” refers to low alloy steel.