alloy c71500 smls pipe

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

In addition to a high melting point and resistance to oxidation and corrosion, nickel alloys are also highly ductile. They can be plated and are easy to solder, making them suitable for industries that require very high and very low temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.22

Inconel 600 alloy is a nickel-chromium stabilized alloy. It has very good oxidation resistance at higher temperatures. In addition, it has excellent resistance to carburizing and chloride-containing atmospheres. It is a non-magnetic alloy with very good mechanical properties. Inconel 601 is a chromium and nickel based material for applications requiring heat and corrosion resistance. This material stands out for its resistance to high temperature oxidation.

Monel400 Copper-nickel alloy (UNSN04400) is a soft Copper-nickel alloy that is resistant to various corrosive environments.

Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

Alloy C276 also prevents the formation of grain boundary precipitates in the weld heat affected zone, making it useful for most chemical processes in the as-welded state. It has excellent resistance to pitting and stress corrosion cracking.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.21

These hastelloy c22 pipe are considered to be versatile due to corrosion and heat resistant. Also, it offers excellent resistance to pitting and stress corrosion cracking resistance and also resistant to a high-temperature atmosphere.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The thermal stability of Hastelloy B3 pipes is superior.

Alloy B2 Tubes, which has poor corrosion resistance to oxidizing environments. Hastelloy B2 Seamless Tubes is a solid solution strengthened, nickel ¨C molybdenum alloy, with significant resistance to reducing environments like hydrogen chloride gas, and sulphuric, acetic and phosphoric acids. Molybdenum in Hastelloy B2 Welded Tubes is the primary alloying element which provides significant corrosion resistance to reducing environments.

Nickel 201 is pure commercial nickel with very low carbon content and has been approved for service in high temperature environments up to 1230¡ãC.

Alloy C276 is an alloy that excels in a range of corrosive environments. It is resistant to strong oxidizing chlorides, reducing acids, hot sea water and saline solutions. Alloy C276 is one of the few materials resistant to wet chlorine, hypochlorite and chlorine dioxide.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.44

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Super alloys are also referred to as high performance alloys. They have good creep and oxidation resistance, and are utilized where high surface stability is required. They also have an ability to function under high temperatures and mechanical stress. They can be strengthened by solid-solution hardening, work hardening, and precipitation hardening. They are divided into three groups such as iron-based, nickel-based, and cobalt-based alloys.

Nickel alloy pipes and tubes have excellent mechanical properties, low gas content, low vapor pressure, magnetic properties, and high thermal and electrical conductivity. These properties and their chemical composition make nickel highly resistant to corrosive environments. Nickel can be used in any environment below 600o F. It is highly resistant to corrosion by neutral and alkaline salt solutions. Nickel also has low corrosion rates in neutral and distilled water. Metal can be hot formed into any shape or cold formed by all methods.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.65

These Monel 400 pipes have high strength and toughness over a wide temperature range and have excellent resistance to many corrosive environments.

The Alloy 800H Tube has good machining characteristics as seen in iron-based alloy and they tend to work-harden during the machining process.

The most versatile of the INCONEL product range, INCONEL alloy tubes are used widely, thanks to its high strength, excellent fabricability and outstanding corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Features of the inconel 600 pipes are as follows- it has good resistance towards corrosion, it is immune to chloride stress and corrosion cracking.

Therefore, pure nickel alloy or high nickel alloy seamless pipes are only used for applications that require this feature and cannot be replaced by anything else. These polished pipes can be pure straight pipes or other shapes. The most commonly used shape is the round tube. But in addition to hot-worked nickel alloy round tubes, there are square, hexagonal and rectangular tubes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.38

ASTM B163 Alloy 825 Seamless Pipe product is a nickel molybdenum chromium superalloy with the addition of tungsten, designed for excellent corrosion resistance in a wide range of harsh environments.

Los usos de la aleacion 20 se encuentran en una variedad de industrias, como procesamiento de alimentos, farmaceutica, marina, petroquimica, refineria y procesamiento quimico. El uso final de las aplicaciones tambien incluye bombas y valvulas, sujetadores, equipos de procesamiento de alimentos, accesorios, agitadores, tanques de mezcla y tanques de almacenamiento.

Inconel 625 Clad Pipe is an alloy that is not susceptible to rot due to oxidation. This material is suitable for structural construction, especially components such as Alloy 625 seamless tubing for heat transfer applications.

Werkstoff NR 2.4816 Pipes have common applications in gas turbine blades, seals, and combustors, and turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, and so on.

Hastelloy C-276 is ideal for use where protection from aggressive corrosion and localized corrosion attack is required. Other important properties of this alloy Nickel Alloy C-276 and Hastelloy C-276 include its resistance to oxidizing agents.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.35

Inconel 600 Pipes can easily reduce the environments and the chloride stress corrosion cracking which generally happens due to the nickel content.

Monel 400 is a copper-nickel corrosion resistant alloy, which is a kind of corrosion resistant alloy with the largest usage, the most extensive use and excellent comprehensive performance.

Incoloy 909 Tube has a higher ferrous content and a lower overall cost of ownership. We offer quick responses to customer inquiries and specialize in the rapid delivery of both large and small quantities of Incoloy 909 Tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Alloy B-3 also withstands sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media.

Hastelloy B2 Welded Pipes is a wrought nickel-molybdenum alloy that can be used in the ¡®as welded¡¯ condition.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Although the properties of this particular specified inconel 625 Pipe is dependent on the heat treatment used and the dimensions which include the small diameter and light walled tubing. Each Inconel 625 Pipe or tube, as per the ASTM B444 specification must undergo hydrostatic testing.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”