alloy flange expansion pipe fitting bellows compensator A182 F11 plate flange

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

The alloy content of pipes that make up low alloy steel is less than 5%. High alloy steels, on the other hand, have an alloy content ranging from 5% to about 50%. Similar to most alloys, the working pressure capacity of alloy steel seamless pipe is about 20% higher than that of welded pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P127

These ASTM A182 alloy steel F5 F9 F11 F12 F22 F91 pipe fittings are corrosion resistant. ASTM A182 alloy steel F5 F9 F11 F12 F22 F91 fittings also have high dimensional accuracy.

Monel 400? is a nickel-copper alloy that is hardened by cold working only. The various types of available fittings are Monel Stub end, Monel Reducer, Monel End Cap Fittings, Monel tee, etc.

The composition of A335 P91 material contains carbon, manganese, phosphorus, sulfur, silicon, chromium, molybdenum, vanadium, nitrogen, nickel, aluminum, niobium, titanium and zirconium. There are two kinds of seamless pipes and welded pipes. Seamless pipe is drawn from a single raw material billet, while ASTM A335 Gr P91 Welded Pipe is welded from strip or sheet. Welding can be helical or longitudinal from one end to the other to produce the tube. The minimum yield strength of the pipe is 415MPa and the minimum tensile strength is 585MPa.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.60

Inconel600 is suitable for welding with the same material or other metals by any traditional welding process, such as tungsten electrode inert gas welding, plasma arc welding, manual sub-arc welding, metal inert gas shielded welding, molten arc inert gas shielded welding, and pulsed arc welding. Welding is the preferred solution. When using manual arc welding, it is recommended to use a shielding gas mixed with various components (Ar+He+H2+CO2).
Welding of Incoloy 825 must be carried out in the annealed condition and cleaned with a stainless steel wire brush to remove stains, dust and various markings. When welding the root of the weld, extreme care must be taken (Argon 99.99) to obtain the best quality of the root weld so that the weld does not produce oxides after the root has been welded. Color from the weld heat-affected zone should be removed with a stainless steel brush while the weld area is not cool.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

Other than carbon, these contain in them substantial quantities of nickel, manganese, chromium, silicon, tungsten, vanadium, molybdenum.

A182 F5 material is an excellent alloy that is hardened only by cold working. It is often used in nuclear energy, medical equipment, chemical energy, etc. These ASTM A182 Grade F5 Flanges gives extraordinary erosion resistance in, for instance, caustic and acidic applications which includes sulphuric and higher chloride environments.

A335 P5, P9, P11, P12, P22, P91 grade alloy steel seamless pipes are individually sheathed in plastic bags, and the pieces are made of waterproof packaging material and tied with nylon ropes. There is a clear label on the outside of the package for easy identification of quantity and product ID with great care during handling and shipping.

The Chromium content in the alloy aids in improving its anti-oxidization and anti-corrosion properties. This steel is usually supplied by the alloy steel flanges manufacturers in India in an annealed or normalized and tempered condition.

ASME SA 335 grade P22 alloy steel pipe can withstand high pressure and high temperature. Therefore, ASTM A335 P22 pipe is used in applications that need to operate at high pressure and high temperature.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.42

The Welding neck flanges are available across various materials. These materials will have to be as per the Standards set. The materials also should be as per the quality specified by the ASTM or ASME standards.

We are a manufacturer, supplier and exporter of Alloy Steel ASTM A182 F5 Flanges, which have gained overall positioning in several piping systems. Our range of alloy steel A182 F5 slip flanges includes all types of conventional and custom flanges to ASTM A182 specification, alloy steel flanges for high temperature service.

The A335 p12 material composition includes carbon up to 0.05 ¨C 0.15, manganese up to 0.30 ¨C 0.61, sulfur and phosphorus up to 0.025, silicon up to 0.5, chromium 0.80-1.25 and molybdenum up to 0.44-0.65. This steel shall meet the specified chemical composition, tensile properties and hardness requirements.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.66

Alloy Steel F11 Flanges specifications are also mentioned and the face type starts from flat face, raised face, ring type joint and many more.

Although acceptable fouling levels are considered beneficial to the alloy, in moderate cases, fouling deposits on Astm A182 F9 flange surfaces can act as a barrier to excessive corrosion. When flanges are produced using specification ASTM A182, they work well at high temperatures, albeit in applications with high pressure.

ASTM 182 is used for pressure systems, including fittings, flanges,and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

ASTM A320 Grade L7 is a material specification for bolts, studs, nuts, and other fasteners designed for high temperature bolting applications. ASTM A320 L7 grades are divided into 4 performance classes, A, B, C, and D, each with different tensile and stress rupture properties. Class 660 fasteners are used to bolt boilers, pressure vessels, pipe flanges and valves for high temperature service.

Forged Pipe Fittings (Socket Weld and Threaded) are made in
accordance to ASME B16.11, MSS-SP-79/ 83/ 95/ 97 and BS3799
standards, and are used to connect nominal bore schedule pipes
and pipelines.

825 is an austenitic Ni – Fe – Cr – Mo – Cu nickel based alloy developed to resist corrosion in very aggressive media.Alloy 825, also known as Incoloy 825, is a nickel-iron-chromium alloy with molybdenum and copper added.

ASTM A182 is the Standard Specification for Forged Stainless Steel Pipe Flanges and Stainless Steel Forged Fittings.

Low alloy steels contain trace amounts of alloying agents such as niobium, nitrogen, vanadium, copper, nickel, chromium, titanium, calcium, molybdenum, rare earth elements or zirconium.

Alloy steels are used in a range of demanding applications in the aerospace and power (nuclear) industries. Adding other elements gives alloy steel extra strength.

ASTM A182 F22 Forging raw material used for the manufacturing process is well-tested and inspected by inspection agencies and quality experts.

The A335 P91 chrome tube composition makes these high mechanical properties possible for the material. P91 steel pipe materials can be normalized and tempered during the production process, and can also be quenched and tempered. These methods increase the strength of the material. Additionally, these pipes are drawn and seamless.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.24

Too many good properties found in the same product just because of better sheet production. These are high tensile strength, good dimensional accuracy, surface finish, flexibility and durability, withstand heavy loads, strong construction and corrosion resistance. Resistance to corrosion, stress corrosion cracking, crevice corrosion cracking, oxidation/pitting corrosion makes it suitable for a variety of applications.

The ASTM A333 standard covers seamless walled and welded carbon and alloy steel pipes for cryogenic use. ASTM A333 Alloy Pipe shall be manufactured in a seamless or welded process with no filler metal added during the welding operation.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.61

ASTM A182 F12 flat bar is a flat rectangular section with square edges of varying sizes. It is suitable for a variety of applications, distributed in engineering, construction, manufacturing, manufacturing, mining, light grids and many other industries.

ASTM A182 F91 is an American standard Martensite type heat-resistant steel forgings, according to ASTM A182-2016.