Alloy G30 N06030 2.4603 Hastelloy G30 full threaded hex nut DIN934

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy UNS N10276 sheets that are ideal for various sectors and meet our clients’ needs. We manufacture ASTM B575 Hastelloy C-276 plates in a variety of sizes and specifications.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.

Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

Alloy C276 bar welding products are used as a matching composition filler material for welding C276 alloy forged and cast products in dissimilar welding applications including other NiCrMo alloys and stainless steels, as well as for surfacing or cladding of steel. Parts thermoformed in HASTELLOY C-276 alloy bar should, if possible, be solution heat treated prior to final fabrication or installation.

Hastelloy C-4 is a nickel-chromium-molybdenum alloy with outstanding high temperature stability. It has high ductility and corrosion resistance. It’s high temperature resistance up to 1900 ¡ãF (1038 ¡ãC) makes it suitable for most chemical process application in the “as” welded condition.
Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to
which the austenitic stainless steels are prone). With its high chromium and molybdenum
contents, it is able to withstand both oxidizing and non-oxidizing acids, and is resistant to
pitting and crevice attack in the presence of chlorides and other halides.

These fasteners are designed according to the quality of raw materials according to national and international standards, thus ensuring their durability and high quality.

Some typical applications for Alloy C22 flat washers include equipment components in chemical and petrochemical organic chloride processes and processes using halide or acid catalysts. Alloy C22 round washers prevent oxidation and reduce water corrosion. Alloy C22 machined gaskets are used in chemical processing, expansion bellows and nuclear fuel processing, industrial equipment.

Hastelloy C-276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents (such as ferric chloride and cupric chloride), hot fouling media (organic and inorganic), chlorine, formic and acetic acid, acetic anhydride, and Seawater and brine solutions.

Hastelloy C22 or Wnr 2.4617 Material is also referred to as alloy C22.

Hastelloy B3 Weld Neck Flange is not recommended for use in the presence of ferric or cupric salts because these salts can cause premature failure.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy X fasteners, also known as UNS N06002 fasteners, have excellent corrosion resistance and high temperature strength. It is very resistant to stress corrosion cracking but has excellent ductility when subjected to 16,00 hours of torture at temperatures up to 1,600F. It is also suitable for furnaces, heaters and many high temperature applications because it is weldable, heat treatable and relatively easy to machine. That’s why we think Hastelloy X fasteners basically offer the best of both worlds – corrosion and heat resistance.

Alloy X pipe bend offers exceptional performance in furnace rolls or other industrial furnace applications because of the alloy’s strong resistance to oxidizing, reducing and neutral atmospheres.

Hastelloy X alloy (UNS N06002; W.Nr. 2.4665) is a high temperature, matrix strengthened, NiCrFeMo alloy with excellent oxidation resistance and excellent Strength. Hastelloy X alloy is a nickel-chromium-iron-molybdenum alloy that provides excellent oxidation resistance and high temperature strength while still being easy to manufacture.

These Hastelloy Alloy C276 Forgings is used for dissimilar welding applications including other nickel ¨C chromium ¨C molybdenum alloys and stainless steels, and for weld overlay or cladding of steels. The alloy is used in flue gas desulfurization systems. It has excellent resistance to pitting and stress corrosion cracking, and resists wet chlorine gas, hypochlorite and chlorine dioxide. The alloy is also resistant to seawater and brine solutions.

HASTELLOY C276 is one of the few alloys resistant to wet chloride gas, hypochlorite and chlorine dioxide solutions.

Nickel alloys are alloys with nickel as principal element. Complete solid solubility exists between nickel and copper. Wide solubility ranges between iron, chromium, and nickel make possible many alloy combinations.Steel plates are often used for structural and construcation applications, pressure vessels, marine and off shore equipment, and military applications. The grade, elements and parameters of a steel plate are also improtant in how it is used.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy C-276 fasteners and other products in the Hastelloy family have excellent resistance to corrosion and oxidizing and reducing chemicals. Due to its adaptability, Hastelloy C-276 alloy can be used in problem areas and is more likely to occur in process areas. In Hastelloy C276 hex bolts, the chromium content is increased to about 21% and the molybdenum content is reduced to about 13%. Hastelloy C276 Heavy Duty Hex Bolts also provide optimum resistance to environments encountered in reducing and oxidizing conditions in the process stream.

These Hastelloy B2 Weld Neck Flanges should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

Alloy B2 should not be used at temperatures between 1000¡ãF and 1600¡ãF as the alloy forms secondary phases that could decrease the ductility of the material.

Alloy X pipe bend is one of the most widely used nickel base superalloys for gas turbine engine components.

Hastelloy X pipe bend is corrosion resistant, heat resistant and oxidation resistant, being able to withstand reducing or neutral atmospheres and oxidation.

Hastelloy C22 Threaded Flanges has outstanding resistance to both reducing and oxidizing media and because of its resistibility can be used where ¡°upset¡± conditions are likely to occur.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications.Nickel Pipe is a metal pipe that is made up of an alloy that has primarily nickel and other elements in its composition.

Hastelloy C22 fasteners are a general-purpose grade composed of chromium, nickel, molybdenum and tungsten alloys. These designs are designed to increase resistance to pitting, stress corrosion cracking (SSC) and crevice corrosion cracking. Alloy C-22 has excellent resistance to a variety of chemical process environments, including strong oxidizing agents such as ferric and cupric chlorides, chlorine, hot fouling solutions (organic and inorganic), formic and acetic acid, acetic anhydride, and seawater and Brine solution. C-22 alloy resists the formation of grain boundary precipitates in the weld heat affected zone and is therefore suitable for most chemical process applications in as-welded conditions.

This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition.

The best feature of Hastelloy C22 threaded flanges is that it has the best resistance to oxidizing aqueous media and a wide range of chemical process environments, including oxidizers like ferric acids, seawater, and chloride solution.

C22 nickel alloy fasteners offer better overall corrosion resistance than its sister alloy Hastelloy C-276, and more specifically, it offers better protection when used in certain saturated wet chlorine environments. Additionally, its high chromium content provides C22 fasteners with better resistance to oxidative media than C276. This makes it excellent resistance to chloride-induced pitting, although in most cases C-276 fasteners are a more cost-effective option due to their availability, especially in sizes smaller than 1/ 2″ case.