Alloy Steel ASTM A182 F5 F9 F11 F12 F22 Flange used to close a pipe connection

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Chromium-molybdenum alloy flanges connect pipes, valves, pumps and other equipment to form a piping system. They are ideal for applications that convey corrosive or high temperature fluids or gases.

ASTM A193 Grade B7 bolts are considered for applications up to 450¡ãC due to heat treated chrome molybdenum steel. B7 stud bolts are bolts with male threads and a hex head designed to be actuated by a wrench. It can be fully threaded or partially threaded and is supplied with a hex cap.

For A335, chromium is a key ingredient used to make stainless steel. If the chromium content is above 12%, it can be classified as stainless steel. Even at high temperatures, the antioxidant potential of chromium is irreplaceable. Better hardness, tensile strength and yield strength at standard temperature. Due to the material’s composition, it is ideal for use in power plants, refineries, petrochemical plants and other oilfield services involving high temperature and high pressure transportation.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P108

SA 182 Gr F1 Slip on Flanges also known as SO flanges. This is a flange that slides over the pipe and has an internal design that is slightly larger than the pipe.

SA 182 Socket Weld Flanges are joined by inserting the pipe into the socket end and applying a fillet weld around the top. This allows for better flow of fluid or gas inside the pipe and smooth holes.

We use tested and qualified raw materials to improve the machinability of alloy tubes. These are processed through a metallization process that refines structural and material defects.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.37

Alloying steels have added alloying elements such as manganese and nickel. These elements increase the strength, hardness and toughness of metals. Added elements make alloy steels ideal for demanding industrial applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.24

These pipes are supplied with ASTM A182 F11 flanges for the mining, construction and aerospace industries, giving them resistance to sensation, and they also give you maximum strength. They are also made from the highest quality raw materials.

When the carbon content of the a333 gr 6 welded pipe chemistry is lower, the chance of cracking in the welded area is also lower. However, some manufacturers prefer seamless pipes over welded pipes. The reason behind this is that the performance of the a333 gr 6 seamless tube is almost 20% higher than the welded one in high pressure environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.57

The ASTM A194 specification covers carbon, alloy and stainless steel bolts for high pressure and/or high temperature service.

Alloy Steel Grade 2H Flat Washers are available in a variety of sizes according to market and customer needs. We play a major role in providing our customers with a high quality range of alloy steel grade 2H lock washers with some great features such as precise dimensions, custom solutions, robustness and more.

In applications where higher working pressures are a prerequisite, the use of seamless pipes is justified. Although stronger than welded pipe, the cost is much higher. In addition, in welded products, there is a greater risk of intergranular corrosion in the heat-affected weld zone. The obvious difference between alloy steel welded pipe and seamless product is the transverse seam along the length of the pipe
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P128

These alloys typically comprise of about 1 % to 5% of the steel’s content and are usually added based on their ability to provide a very specific attribute for their end use.

Inconel600 is suitable for welding with the same material or other metals by any traditional welding process, such as tungsten electrode inert gas welding, plasma arc welding, manual sub-arc welding, metal inert gas shielded welding, molten arc inert gas shielded welding, and pulsed arc welding. Welding is the preferred solution. When using manual arc welding, it is recommended to use a shielding gas mixed with various components (Ar+He+H2+CO2).
Welding of Incoloy 825 must be carried out in the annealed condition and cleaned with a stainless steel wire brush to remove stains, dust and various markings. When welding the root of the weld, extreme care must be taken (Argon 99.99) to obtain the best quality of the root weld so that the weld does not produce oxides after the root has been welded. Color from the weld heat-affected zone should be removed with a stainless steel brush while the weld area is not cool.

There is absolutely no risk of intercrystalline corrosion on cooling or welding in Alloy Steel(AS) F12 Slip-on Flanges due to the low carbon content.Alloy Steel F12 Weld Neck Flanges is appropriate to various applications where its different remarkable characteristics are sought-after but a brushed/polished finish is not necessary.

Alloy pipe is a higher percentage of tubular alloying elements such as molybdenum (Mo), chromium (Cr), nickel, etc. than standard carbon steel pipe. In fact, ASTM A335 covers “low alloy” steel pipes, that is, having less than 5% total alloying elements. The addition of higher percentages of alloying elements such as nickel and chromium converts the steel into higher alloys such as stainless steel, duplex stainless steel, up to superalloyed materials such as Inconel, Hastelloy, Monel, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P100

Alloy Steel Threaded Flanges are widely demanded as pipe flanges i.e called as threaded flanges which is useful in different industrial applications. It is also known as screwed flange and it has a thread inside the flange bore which fits on the pipe with matching male thread on the pipe.

A387 Chrome Molybdenum Steel Sheet Uses & Applications Due to the key properties of the alloy, chrome molybdenum steel sheet is popular in onshore and offshore production facilities in the oil and gas industry. It is also widely used in the energy industry as a key component in power plants. It can be found in boilers and pressure vessels, heat exchangers, flanges, fittings and valves, pipes and pipe supports.

HT PIPE is a leading manufacturer of the ASTM A182 Low Alloy Steel flanges as well as the other types of alloys. The ASTM A 182 specification specifies flanges for high pressure services.

We offer a comprehensive line of ASTM 335 alloy steel pipe and tubing, known for superior quality and unmatched durability. They are available in different sizes, grades, sizes and shapes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.22

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

Grade 1 alloy steel plate has very high corrosion resistance, but it is increasingly expensive. Our alloy steel products are known worldwide for their reliability and quality.

A335 steel pipe can be used in NACE applications at high temperature and high pressure in sour environments, can be used in NACE-MRO 175 Sour Service, ideal for creep rupture applications, can handle high temperatures with very low elasticity.

After completion of manufacturing process, the manufactured product undergoes the process of Inspection. Which is one of the important aspects of metal forging manufacture, all the manufactured parts are being checked for defects under this process.

Bolts are chrome molybdenum heat treated steel according to ASTM A193 B7m specification for bolts. The primary alloy components of ASTM A193 Grade B7 bolts are chromium and molybdenum. These ASTM A193 B7 Metric Bolts are manufactured by heat quenching and tempering. Heat treating A193 B7 bolt material helps to develop desired mechanical properties such as increased tensile strength of ASTM A193 B7 hex bolts after heat treatment.

It has chemical composition, such as nickel, nickel-chromium, molybdenum, chromium-molybdenum steels etc.

Alloy Steel Flanges are made in different steel alloys. The flanges vary in dimensions and types. There are ? inches through 48 inches of nominal diameter sizes of flanges.

ASME SA335 P9 Alloy Steel Seamless Pipe is certified and tested according to Tensile Test, Transverse Tensile Test, Flattening Test, Metal Structure and Etching Test, Photomicrograph, Hardness Test, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.25

A weld neck flange, also called a tapered hub flange or high-hub flange, is a kind of flange that can relocate stress to the pipes, ensuring a decrease in high-stress concentration at the bottom of the flange.

ASTM A182 Stainless Steel Flanges are manufactured per ASME B16.5 150#, 300#, 600#, 900#, 1500#, 2500#.