alloy steel pipe end cap

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

ASTM A182 F11 Alloy Steel Flanges are used in manufacturing of flanges and fittings and are used in industries where cold temperature is observed and corrosion resistance doesn¡¯t matter much.

Stainless steel is a versatile alloy is considered to be amongst the most widely used metals across the world.Stainless Steel A403 WP304 contains higher chromium and low carbon content.

ASTM A335 P91 Alloy Steel Pipe and High Pressure Boiler Tube are the two variants available, the range depends on the size, which only depends on the application. Pipe lengths will be hydrostatically tested and non-destructively tested to specification.
volume_up
content_copy

share
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P125

The addition of chromium and molybdenum to a182 grade f9 enhances the corrosion resistance of the flange.

ASTM A193 Grade B7 specification covers the requirements for high strength alloy steel bolting materials for high temperature or high pressure service and other special purpose applications. It is a standard specification that defines typical chemical composition, mechanical properties, hardness requirements, preferential heat treatment, product marking, certification, and other requirements for bolted connections used in pressure vessel service, valves, flanges, and fittings. ASTM A193 defines SI (metric) and inch-pound units.

Chrome molybdenum grades P11, P22, P91 and P92 are used in the power industry. Chromium molybdenum grades P5 and P9 are used in petrochemical refining processes. Chrome molybdenum forged fittings and flanges are available in grades F5, F9, F11, F22, F91, F92. Chrome-molybdenum alloy butt welded pipe fittings are available in WP5, WP9, WP11, WP22, WP91, WP92 grades. F11 and F22 materials comply with NACE-MRO 175.

It is a standard specification defining typical chemical composition, mechanical properties, hardness requirement, preferential heat treatment, product marking, certification and other requirements, suitable for bolting used in pressure vessel service, valves, flanges and fittings. ASTM A193 defines both SI (Metric) and inch-pound units.

Grade P11 is known as chrome molybdenum alloy steel. Compared to carbon steel, the properties of this alloy steel are much higher. Typically, alloy steels such as ASTM A335 P11 pipe tend to have much higher element percentages than conventional steels. So take their efficiency to the next level. The alloy composition of the P11 grade consists of chromium and molybdenum, with a chromium percentage of approximately 1.25. The content of molybdenum in the alloy steel P11 seamless pipe is about 0.5%.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P124

This is used in fabrication of tubes, boilers and super heaters. On many other applications, this is used and is available in various other sizes and shapes.

Chromium Molybdenum Alloy Steel or Chromium Molybdenum, CrMo is an alloy steel used for high temperature and high pressure service.

Blind flanges have the face thickness of a flange, a matching face type, and similar bolting pattern.

Alloy steel UNS K12822 round bars are widely used in numerous industries for the manufacture of different kinds of components. We provide a full range of alloy steel 15Mo3 round bars which are widely used in engineering, construction and other industries.

ASTM A335 grade P91 tubing contains small amounts of other alloys such as aluminum, niobium, nickel, nitrogen, titanium, vanadium, and zirconium. These pipes are based on the A335 standard, but when forged or drilled, the pipes can also meet the A369 standard. These pipes have a minimum yield strength of 415 MPA and a minimum tensile strength of 585 MPA.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.30

S32205 is a duplex stainless steel with twice the strength of austenitic stainless steel. Duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength, good impact toughness and good overall and local stress corrosion resistance. The yield strength of duplex stainless steels is twice that of austenitic stainless steels, a feature that allows designers to reduce weight when designing products, making this alloy more affordable than 316, 317L. This alloy is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some limitations, especially when applied to welded structures. Duplex stainless steel has twice the compressive strength compared to austenitic stainless steel, and designers can reduce its weight compared to 316L and 317L. Alloy 2205 is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range, and can also be used at lower temperatures under severe restrictions (especially for welded structures).

The manufacturing process of A860 WPHY 52 includes heat treatment.

A333 P92 steel is American steel grade ASTM A335 P92, which is a martensitic heat-resistant steel. In recent years, it has been widely used in thermal power plants, mainly for main steam pipelines and reheat steam pipelines. The main alloy components are Cr: 9%, Mo: 1%, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.59

The connection between two pipes can be directly welded together, but it is difficult to connect together without welding. When the connection part have problems, it will be hard to repair. The same problem also happened between pipe and valve connection.

The specification for ASTM A320 Grade L7m materials covers alloy steel and stainless steel bolting materials for low temperature applications. ASTM A320 L7 Studs can also be used in applications with ambient temperatures up to -150oF. ASTM A320 grade L7m bolts and ASTM A320 bolts have a minimum Charpy impact value of 15 foot-pounds at this temperature.

The addition of elements such as silicon and manganese through heat treatment provides alloyed steel with improved properties and additional benefits, such as increased corrosion resistance or increased reliability. Alloy steels are also found in applications where their response to magnetism is important, such as in transformers and electric motors.

sa335 P5 P5 materials used to make ASTM A335 pipes etc. must meet chemical composition, tensile properties and SA335 P5 hardness requirements. This type of alloy steel pipe is used in applications that require high temperature service. ASTM A335 P5 Pipe Supplier’s Composition, A335 P5 Allowable Stress contains lesser amounts of Nickel and Manganese as they increase the hardness of the pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.36

These continuous ¨C annealing furnaces in Alloy Steel Grade F12 RTJ Flanges are usually heated by gas ¨C fired radiation tubes in order to separate combustion gases from the inert atmosphere surrounding the strip. Alloy Steel F12 Flanges has applications in many industries such as petrochemical, oil and gas, bulk liquid transportation, pharmaceuticals, chemical, pulp and paper manufacturing, power generation, textiles and others.

Our products are a symbol of constant innovation and superior quality.

These are flanges with creep strength and high resistance; therefore, steel threaded flanges help them work in the petrochemical industry.

A335 has improved wear resistance at higher temperatures. It has good formability and machinability without deformation and deformation. It has good thermal stability in pressurized environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.35

Inconel600 is suitable for welding with the same material or other metals by any traditional welding process, such as tungsten electrode inert gas welding, plasma arc welding, manual sub-arc welding, metal inert gas shielded welding, molten arc inert gas shielded welding, and pulsed arc welding. Welding is the preferred solution. When using manual arc welding, it is recommended to use a shielding gas mixed with various components (Ar+He+H2+CO2).
Welding of Incoloy 825 must be carried out in the annealed condition and cleaned with a stainless steel wire brush to remove stains, dust and various markings. When welding the root of the weld, extreme care must be taken (Argon 99.99) to obtain the best quality of the root weld so that the weld does not produce oxides after the root has been welded. Color from the weld heat-affected zone should be removed with a stainless steel brush while the weld area is not cool.

ASTM A335 is the standard specification for seamless ferritic alloy steel pipe for high temperature service. Covers server levels: P1, P2, P5, P5b, P5c, P9, P11, P12, P15, P21, P22, P23, P91, P92, P122, of which P5, P9, P11, P22, P91, P92 are used in practice the most extensive. This specification covers nominal and minimum wall chrome-molybdenum (also known as Cr-Mo or Cr-Moly) alloy steel pipes for high temperature applications. Pipe ordered to this specification shall be suitable for bending, vanstoning and similar forming operations, and fusion welding. ASTM A335 P11, P22, P91 and P92 are commonly used in power plants and the chemical and petrochemical industries, while P9 and P5 are mainly used in oil refineries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P106

Too many good properties found in the same product just because of better sheet production. These are high tensile strength, good dimensional accuracy, surface finish, flexibility and durability, withstand heavy loads, strong construction and corrosion resistance. Resistance to corrosion, stress corrosion cracking, crevice corrosion cracking, oxidation/pitting corrosion makes it suitable for a variety of applications.

ASTM A335 has added chromium and molybdenum elements and has good tensile strength, good high temperature and corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P92

ASTM A182 Gr F9 flanges are typically designed for applications with high temperature requirements. Alloys used to produce flanges according to this specification include wrought or rolled alloys and several stainless steel grades.

Alloy seamless pipes are processed by advanced machines and manufactured by hot and cold processing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.36