ansi A350 LF2 class 150-1500 carbon steel slip-on flange

Carbon steel pipe flanges usually adopt mild steel or low carbon steel, as it includes small percentage of carbon, strong and tough but not readily tempered. Which with lower cost and material could be used for many applications.

The best corrosion resistance for general corrosion is carbon steel LF3 round bar. Carbon steel LF3 threaded rods have excellent ductility and creep resistance. Carbon steel LF3 polishing rods have the greatest resistance to oxidation corrosion. The best welding and fabrication quality is found in carbon steel LF3 flat bars.

ASTM A105 Flange is a type of flange that is covered by a standard that covers pressure pipe and fittings that can operate under ambient temperature to high temperature services

The ASTM A333 Grade 6 low alloy steel seamless pipes are intended for low temperature services with minimum design temperature -45°C [-50°F] requiring notch toughness. They are usually furnished in nominal pipe size (NPS) and nominal wall thickness with schedule numbers in accordance with ASME B36.10M.

Carbon steel is a special type of steel that, as the name suggests, has a higher carbon content than other types of steel. Most types of steel have relatively low carbon content, around 0.05% to 0.3%. In comparison, carbon steel has a carbon content of up to 2.5%. Twenty and a half percent carbon may sound insignificant, but it brings several attractive benefits not found elsewhere.

Welded A234 WPB pipe fittings mean the large sizes fittings which are pieces welded from steel plates.

carbon steel ASTM A105 Flange are made up of carbon steel or mild steel material. The material composition can have carbon, manganese, phosphorus, sulfur and iron in the composition.

ASTM A234 WP9 Alloy Steel Pipe Fittings are known to deliver exceptional performance and are generally developed for meeting the demands.Extraordinary safeguards for these Alloy Steel WP9 Dish Cap Butt Weld Pipe Fittings ought to be taken to stay away from intemperate heat input.

Hence, materials with low carbon content such as ASTM A105 Fittings are not recommended to be used in those applications which have the need to be constantly exposed to a range temperatures above this value.

ASTM A105 flange is a standard carbon steel grade designed with a superior chemical composition.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

Best price on Carbon Steel A350 LF2 Bright Rod with shortest time delivery or Free Sample of Carbon Steel A350 LF2 Hexagonal Rod.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

ASTM A694 F46 forgings can be made from carbon, low alloy or alloy steel. Steel should be made by open hearth, electric furnace or basic oxygen process and should be fully deoxidized. Its forged flanges and forged fittings can be easily fabricated from ingots, blooms, billets, slabs or bars. All grades of ASTM A694 F46 shall be heat treated. Heat treatment of carbon steels and high strength low alloy steels can include normalizing, normalizing and tempering, or quenching and tempering. The heat treatment of alloy steel may include normalizing and precipitation heat treatment or quenching and precipitation heat treatment.

ASTM A234 Gr. WPB 45 degree elbow, also known as return elbows, functioning to change the direction of flow at a 45 degree angle.

Just as the corrosion resistance characteristics of carbon steel could be improved by further processing, it is possible to increase the mechanical properties of the ASTM A105 Fittings with the use of heat treatments.

Since only one type of carbon steel forging is specified in this standard, a105 is considered a type of forging carbon steel grade.

ASTM A234 is Standard Specification for wrought or forging steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.

The specification is for pressure piping and fitting in the high or moderate temperature services.ASTM A234 (ASME SA234) pipe fittings after shaping from an elevated temperature, shall be cooled down to a temperature below critical range under suitable conditions which preventing injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. Referring standard in Section 7 of ASTM A960/A960M.

Regardless of the heat treatment applied to the carbon steel alloy, the higher carbon content in the material reduces the weldability of carbon steel fasteners, while also effectively reducing the melting point of the bolt. Most carbon steel studs are generally softer.

ASTM A234 standard steel pipe fittings have been widely applied in pipeline systems, it includes carbon and alloy steel material.

Carbon Steel A105 Slip On Flanges are meant for non-critical conditions, as they have a low Carbon content. However, our Carbon Steel A105N SWRF Flanges are ‘normalised’ flanges for a better work performance.

ASTM A420 WPL6 Pipe Fittings are made up of a carbon steel alloy that is made up of carbon, manganese, phosphorus, sulfur and silicon.

The specification for Iso Class 4.8 standard covers Grade 4.8 fasteners like Bolts/Screws/Studs. This type of fastener Class 4.8 Bolt could either have Coarse thread and fine pitch thread formation. The standard Class 4.8 Carbon Steel Bolt has been manufactured from Low or medium carbon Alloy Steel.

ASTM A694 flanges are available in different grades such as F42, F52, F60, F65 and F70.

This grade of the fitting is used in constructions for use in pressure piping and pressure vessel service at low temperature. Also, this fitting is available in two types in welded and seamless.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These flanges are best suited to the high demands imposed by the oil, gas and petrochemical industries

ASTM A234 WPB Fittings are made up of different material grades.ASTM A234 WPB WPC WP5 WP9 WP11 WP22 Fittings Specification
ASTM A234 (ASME SA234) is standard specification of carbon and alloy steel pipe fittings for moderate and high temperature services.