ANSI Alloy Steel Flanges ASTM A182 Flanges with Corrosion resistant and Accurate dimensions

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Monel 400? also has excellent resistance to stress corrosion cracking in most freshwaters.Our Monel Long Radius Elbow Fittings is available at various angles like 30 degrees, 45 degrees, and 90 degrees.

The ASTM A194 specification covers a wide variety of carbon, alloy, and martensitic stainless steel nuts in sizes ranging from 1/4 to 4 inches and metric M6 to M100 nominal. It also covers austenitic stainless steel nuts in the size range of 1/4 inch and M6 nominal and above. These nuts are used for high pressure or high temperature service, or both.

The carbon content of 4140 alloy steel pipe is 0.38-0.43%, the manganese content is 0.75-1.00%, the phosphorus content is 0.04%, the sulfur content is 0.04%, the silicon content is 0.15-0.35%, the chromium content is 0.8-1.10%, and the molybdenum content is 0.8-1.10%. is 0.15-0.25 % maximum in its composition. The material can be heat treated to anneal and normalize in air, or quench and temper in polymer or oil.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P138

These are flanges with creep strength and high resistance; therefore, steel threaded flanges help them work in the petrochemical industry.

Our Alloy Steel Seamless Pipes (IBR) are made of alloy steel with excellent properties. These were developed for energy-related applications involving oil and gas drilling and are therefore subject to the stress of machine parts. In addition, alloy steel pipes are used in domestic, professional or industrial fields.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P118

There are reducing elbows, long radius elbows and short radius elbows in this grade.These fittings are heat treated during their manufacture.

A194 2H nut is a common high strength nut used with many different bolt grades, including A193 Grade B7, A325, A490, etc.

Alloy Steel F12 slip on Flanges are made up of chromium molybdenum steel alloy and therefore have a high rupture resistance. They are also preferred due to their light weight because of the low carbon and high alloy nature.Alloy Steel ASTM A182 flanges are very simple to install and have a low center because the pipe occasionally trips into the flanges after welding.

Many applications in various industries. Pharmaceutical, petrochemical, chemical, etc., are industries where ASTM A182 F9 Weld Neck Flange is widely used. SA 182 Gr F9 Steel Flanges are known to provide an easy access for cleaning, inspection or modification due to their ease in assembling and dis- assembling.

The carbon form can be iron carbide or Alloy Steel F9 Weld Neck Flanges can be carbide of an alloying component, for example, titanium. The A182 F9 Steel Slip On Flanges are good for use with seamless pipes because the flanges allow for the pipes to slip onto them for precise location for the connection.

L7 threaded studs and short head bolts are readily available in the market.

SA335 grade P11 seamless pipe is dimensionally accurate for precision applications, while welded pipe is stronger with high wear and tear properties.

Chromium Molybdenum Alloy Steel or Chromium Molybdenum, CrMo is an alloy steel used for high temperature and high pressure service. Chromium molybdenum is used in power generation and petrochemical industries for its tensile strength, corrosion resistance and high temperature strength.

While chromium is an important alloying agent in a335 P91 piping, it is known to prevent corrosion and has a high resistance to oxidation at high temperatures. Since these pipes are surface treated or coated, they are also protected against corrosion. Surface coating can be accomplished by various techniques such as passivation, phosphating, oil immersion, varnishing and shot peening.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P150

A182 alloy flange has good dimensional accuracy.

Adding nickel adds toughness to the alloy. Similarly adding chromium to chrome moly flanges aids in enhancing other mechanical properties such as temperature strength, hardness, as well as corrosion resistance.

B7 and B7M shall be heat treated by quenching in a liquid medium and tempering. For B7M fasteners, the final heat treatment, which may be the tempering operation if conducted at 1150 ¡ãF [620 ¡ãC] minimum, shall be done after all machining and forming operations, including thread rolling and any type of cutting.

A182 F5 material is an excellent alloy that is hardened only by cold working. It is often used in nuclear energy, medical equipment, chemical energy, etc. These ASTM A182 Grade F5 Flanges gives extraordinary erosion resistance in, for instance, caustic and acidic applications which includes sulphuric and higher chloride environments.

Cold drawn and cold rolled tube types are available. There are seamless tubes, welded tubes, ERW tubes and fabricated tubes. Seamless pipe is made from a single piece of material, whereas ASTM A333 Grade 6 Welded Pipe Specification requires it to be welded from strip or sheet of the same material grade.

The low alloy steel pipe flanges also tend to provide better mechanical properties as opposed to many conventional, standard mild or carbon steels.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

A193 Grado B7 es el tama?o de empernado mas utilizado, ademas de las tuercas A194 Grado 2H se utilizan para empernar tuberias de acero al carbono. Los pernos A193 B7 estan disponibles en tama?os metricos de M6 a M180 y tama?os imperiales de 1/4 a 7 pulgadas de diametro.

Despite adding these elements, low alloy steel flanges aren’t necessarily difficult to weld. The key to achieve a successful performance of the welding operation is by knowing exactly what type of low-alloy steel you have.

ASTM A182 Alloy Steel F22 Fittings are available in a variety of shapes, sizes and dimensions according to the needs or requirements of the application or to customer supplied specifications.

Unlike the bends, the elbows can reduce the pressure applied on the walls when turning the fluid flow direction.Fittings made from WPHY 52 material are known to have a long work life, durable, tough and hard. The WPHY 52 properties make these fittings a perfect cost saving solution for a variety of industries.

Alloy steel seamless pipes are widely used in medium and low pressure fluid pipelines, casings, boiler tubes, oil and gas industry, chemical industry, power generation industry, transformers, agriculture, bearings, general engineering, automobiles, hydraulics, railways, mining, construction, aviation Aerospace, medical, defense and electric motors. P91 alloy steel is mainly used in the power industry. For welded structures, the ASME Boiler and Pressure Vessel Code limits the carbon content to less than 0.35%. Alloy steels are ideal for applications that require higher strength, tougher or better wear resistance than standard carbon steel grades.

After completion of manufacturing process, the manufactured product undergoes the process of Inspection. Which is one of the important aspects of metal forging manufacture, all the manufactured parts are being checked for defects under this process.

The grade mark consists of the grade symbol “2H” and the manufacturer’s identification mark.

ASTM A320 Grade L7M bolts and studs are also made from quenched and tempered alloy steel.

Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.