ansi b16.5 astm A350 LF2 class 150 12 inch carbon steel welded neck flange

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

That means the A105N flange is one kind of A105 flange.But A105N flange have a better mechanical properties than regular A105 flange,better strength and better performance in low temperature service

Carbon steel is a steel in which the main alloying element is carbon. Steel is considered carbon steel when there are no minimum requirements for chromium, cobalt, molybdenum, nickel, titanium, tungsten or other alloying elements. Carbon steel can be made harder and stronger through heat treatment. These hardness and strength measurements are determined by the carbon content – the higher the carbon content, the harder and stronger the steel will be.

Threaded Flange There are different pressure classes such as class 150, 300 and up to 2500 and PN6 through PN64. The A105 Class 300 Flange and below don¡¯t need heat treatment while the higher pressure classes can undergo heat treatment.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

We are manufacturers, suppliers and exporters of Carbon Steel A105 / A105N Flanges, which, the American Society for testing materials, classifies as a standard that covers forged Carbon-Steel piping parts that also include carbon steel pipe flanges, which are serviceable in pressure systems at room temperatures as well as temperatures higher than it. We produce Carbon Steel A105 / A105N Blind Flanges which are successful in pressure bearing and sealing pipe ends in heavy pressure applications like hydraulic systems since they have a maximum bending stress at the centre.

Grade WPB fittings made from the steel pipes or plates maximum C is 0.35%.

A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees.

The flange connection type usually comes with double units, with a gasket and some bolts & nuts to connect each other. (Firstly pipes are welded on the flanges, then valves and other equipment could be installed on flanges.)

When connecting these parts, put gasket in the middle of two flanges, then tightening the flange screws, so the two will be connected together tightly.

These ASTM compliant plates can be considered for applications such as pressure vessels and boilers.

Carbon Steel A105 covers forged carbon steel pipe components such as flanges, fitting valves, etc.

The amount of other elements that may be present in stainless steel is immeasurable compared to carbon steel. The most notable feature of stainless steel is that it is not easy to corrode or rust. Avoiding corrosion is a unique property of steel, as most mild steels are primarily made of iron, which rusts quickly when exposed to conventional oxygen-containing atmospheres.

Carbon steel bolts are one of carbon steel fasteners. There are different types of carbon steel and they all have high hardness. HT PIPE is a leading manufacturer and supplier of carbon steel nuts and bolts and other fasteners.

Materials used to manufacture these flanges are carbon, manganese, phosphorus, sulfur and silicon.

At HT PIPE. we invest in premium resources and dependable technology and machinery. NISPL has given an impetus to several industries during the last three decades, through its outstanding products and extraordinary services.

Flanges made of carbon and low alloy steels can be found in the standard ASTM A350 specification.

The elbow is used to turn the direction of a pipe line regularly by 90 degrees angle.These pipe fittings used in pressure pipelines and pressure vessel fabrication for servic at moderate and increased temperatures. Fittings out of above standards shall be complied with A960/A960M.

Most ASTM A694 F52 flange manufacturers state that the flange has enhanced mechanical properties such as its high tensile strength, good heat resistance and corrosion resistance.

The schedules of the fittings range from 5s to XXS.Fittings over NPS12, produced by locally heating a portion of the fitting stock to any temperature for forming, shall be annealed, normalized, or normalized and tempered. And these fittings inlcudes elbow, tee, reducers, the carbon content shall les than 0.26%. NPS12 under no need to be heat treated under this forming process.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

The forging process also consolidates the material to produce an essentially wrought steel structure. The product is subsequently machined to the exact shape and size of finished flange.

ASTM A350 (ASME SA350) is the standard specification for carbon steel and low alloy steel forged flanges and flanged fittings for low temperature services. ASTM A350 LF2 Flanges come in welding or screw types. The flanges are screwed or welded together with pipes to make the connection between pipes. The heat treatment used by manufacturers on the Carbon Steel A350 Lf2 Flanges includes normalizing, tempering, quenching as well as precipitation heat treatment.

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on. There are the pressure grade ASTM A234 WPB Pipe Fittings in 1/2 inches to 24 inches nominal bore sizes with different wall thicknesses that correspond to the schedules.

The cl.150 a105 lap joint flange ansi 16.5 is another type which has a lap joint on it for better connectivity. The flanges can range in size from ? inches to 48 inches. The standards governing the dimensions can be ANSI, ASME, DIN, EN and other international standards.

This steel grade is a medium carbon alloy and also contains certain amounts of manganese, phosphorus, sulfur and silicon.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Usually, these applications are pressure systems, and it is seen in many instances, the ASTM A105 Threaded Fittings add value to said application.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Carbon steel LF3 bars are mainly used in the construction of skyscraper bridges and shipbuilding. Carbon steel LF3 threaded rods are commonly used in pharmaceutical equipment. Carbon steel LF3 round bars are also widely used in heat exchangers and valves.

This material is durable, cost lower, and difficult to break. In case used in a stainless steel piping system it shall be adapted with a lap joint end ring.