ansi b16.5 carbon steel flange A350 LF2 plate-flat flange from china factory A350 LF3

The flange connection type usually comes with double units, with a gasket and some bolts & nuts to connect each other. (Firstly pipes are welded on the flanges, then valves and other equipment could be installed on flanges.)

When connecting these parts, put gasket in the middle of two flanges, then tightening the flange screws, so the two will be connected together tightly.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The material has carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium in its composition. Since the other materials are less than 1% of the composition, these are called the carbon steels.

We are manufacturers, suppliers and exporters of Carbon Steel A105 / A105N Flanges, which, the American Society for testing materials, classifies as a standard that covers forged Carbon-Steel piping parts that also include carbon steel pipe flanges, which are serviceable in pressure systems at room temperatures as well as temperatures higher than it. We produce Carbon Steel A105 / A105N Blind Flanges which are successful in pressure bearing and sealing pipe ends in heavy pressure applications like hydraulic systems since they have a maximum bending stress at the centre.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

a350 lf2 welding neck flange has very good machinability, dependent on condition, and operations such as turning, sawing, milling, broaching, etc. The sa-350 lf2 flange ring type joint is fitted in two parts and will be connected to the piping application with welding. It is a machined from forging, it is typically butt welded to a pipe. The rim has a series of drilled holes that allow the flange to be affixed to another flange with bolts.

We are a manufacturer, supplier and exporter of Alloy Steel ASTM A234 WP22 Buttweld Fittings that form meaningful connections between multiple pipes of various sizes.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

U-Bolts are easy to machine and can meet the tight tolerances required for thread and fastener configurations. Carbon steel is also an economical metal. Carbon steels are classified by the amount of carbon in the alloy, which affects the properties of the steel. Mild steel with a carbon content of 0.05-0.3% is ductile and ductile. Low tensile strength and hardenable by carbonization. It is the lowest cost of carbon steel alloys.

Some of them are flange and forge fittings. They are for smaller diameter piping. This carbon steel material grade ASTM A105 is the best fit in pressure systems that need service at high temperatures.

WPB is the most commonly used carbon steel pipe fitting material for medium and high temperature application now, it can be made by steel pipe like ASTM A106 Gr.C or steel plate like ASTM A285 GR.C.

Carbon steel LF3 bars are mainly used in the construction of skyscraper bridges and shipbuilding. Carbon steel LF3 threaded rods are commonly used in pharmaceutical equipment. Carbon steel LF3 round bars are also widely used in heat exchangers and valves.

A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees.

ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges.

The ASTM A333 Grade 6 low alloy steel seamless pipes are intended for low temperature services with minimum design temperature -45°C [-50°F] requiring notch toughness. They are usually furnished in nominal pipe size (NPS) and nominal wall thickness with schedule numbers in accordance with ASME B36.10M.

The ASTM A420 Grade WPL6 can be seamless, welded or fabricated. There are different types of the fittings such as the unions, plugs, couplings, bends, caps and elbows.

a515 gr.70 is used in the construction of boilers designed to resist the internal pressure of pressure vessels, boilers and valves.

Flanges are an integral part of processing based industries. Most industries, including the oil and gas, water treatment and nuclear power generation make use of pipes, which permit the flow of media across different factory units

Alloy Steel Buttweld Fittings is a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment. It has many inherent advantages such as it provides permanent leak proof to the fittings. The continuous metal structure formed between fitting and pipe gives strength to the system. Smooth inner surface and gradual directional changes minimize the action of corrosion and erosion and reduce pressure losses and turbulence. It doesn’t make it any less vulnerable to rust when exposed to the elements since it is ferrous

The schedules of the fittings range from 5s to XXS.Fittings over NPS12, produced by locally heating a portion of the fitting stock to any temperature for forming, shall be annealed, normalized, or normalized and tempered. And these fittings inlcudes elbow, tee, reducers, the carbon content shall les than 0.26%. NPS12 under no need to be heat treated under this forming process.

According to different varieties and requirements of pipe fittings, forging pipe fittings mainly adopts die forging, free forging and cutting forming processes.

Nuts and bolts exhibit low strength. However, mild steel is highly flexible. High ductility is a property that makes the material ideal for machining and welding. No different elements – used as an alloying agent, not other types of steel, which makes nuts and bolts known as low-cost bolts.

The ANSI A105 Flanges Reducing is basically used for reducing the line size where space limitations will not allow the length of a ASTM A105N Weld Neck Flanges and reducer combination.

ASTM A105 flange is a standard carbon steel grade designed with a superior chemical composition.

A105 steel is one of the most commonly used carbon steel material grades for the manufacture of forged piping components such as flanges and forged fittings for small diameter pipes.

ASTM A105 covers forged carbon steel flanges and piping components for ambient and high temperature service in pressure systems. It also includes fittings, valves and similar parts. The maximum weight of manufactured forgings to which this standard follows is 10,000 circles (4,540kg). Larger forgings can be made in accordance with Standard A 266/A266M. This specification does not cover tube sheets and hollow cylindrical forgings for pressure vessel shells.

We supply a wide range of precisely engineered ASTM A 105 Carbon Steel Socket Weld Flanges made in compliance with international quality and safety standards.

This material should be arranged the charpy V impact test in temperature of -46¡æ, to make sure it can work in a lower temperature service, for example in cold weather, winter or deep-sea water offshore projects.

At HT PIPE. we invest in premium resources and dependable technology and machinery. NISPL has given an impetus to several industries during the last three decades, through its outstanding products and extraordinary services.