ANSI B16.5 Hastelloy X Flanges ANSI B16.5 Hastelloy Alloy X Flanges

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy B3 Spacer Flanges does not rust, because of the interaction between its alloying elements and the environment.

Hastelloy C-276 is a nickel-chromium-molybdenum alloy that is resistant to corrosion.C276 alloy is suitable for many chemical process applications.

HastelloyB2 is a nickel-based wrought alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures. Therefore, it has strong resistance to stress corrosion cracking and pitting corrosion. It is also resistant to hydrogen chloride, sulfuric acid, acetic acid and phosphoric acid. Hastelloy B-2 is a grade of Hastelloy?, a nickel-molybdenum alloy. There are many different grades of Hastelloy?, including B-2. Hastelloy? grades are optimized for specific applications. molybdenum

Hastelloy B3 Ring Type Joint Flanges is ideally suited for applications requiring corrosion resistance superior to SS 304 and has good elevated temperature strength.

Hastelloy G30 is resistant to grain precipitation in high temperature regions. Hastelloy G30 fasteners exhibit physical properties such as thermal conductivity, elongation, and elastic modulus. Hastelloy G30 has properties such as yield strength and tensile strength. Our company supplies these fasteners to oil and gas, refineries, fertilizers, heat exchangers. These fasteners are also used in water treatment, sugar, dairy and food processing. It also shows density, area reduction, and coefficient of linear thermal expansion. Our Hastelloy G30 fasteners are highly resistant to hydrochloric and nitric acids. The alloy has superior resistance to industrial phosphoric acid. Hastelloy G30 fasteners perform well in corrosive environments.

AMS 5754 pipe bend has no yield or tensile strength requirements, but it does require a hardness maximum and stress rupture minimums.

C276 is a solid solution strengthened nickel-molybdenum-chromium alloy with a small amount of tungsten that exhibits excellent corrosion resistance in a variety of harsh environments. Applications include, but are not limited to, stack liners, pipes, dampers, scrubbers, stack gas reheaters, heat exchangers, reaction vessels, and evaporators. Industries that can use C276 include petrochemical and chemical processing, power generation, pharmaceuticals, pulp and paper, and waste treatment, to name a few.

The distinguishing feature of Hastelloy B3 hex bolts is their ability to maintain excellent ductility during transient exposure to intermediate temperatures. Hastelloy B3 bolts are made of an alloy containing nickel and molybdenum. These bolts are resistant to corrosion, pitting and stress corrosion cracking. These bolts can also withstand a variety of acid binding environments, such as those containing sulfuric, acetic, formic, and phosphoric acids.

The exceptional corrosion resistance of C22 has promoted its use in many different markets wherever harsh environments are encountered, including the chemical process, pharmaceutical, food processing, oil and gas, power generation, and the paper industries.

2.4819 has very good resistance to pitting, crevice corrosion and stress corrosion cracking, C276 is worth mentioning for its excellent resistance to aggressive media under oxidizing and reducing conditions.

Hastelloy C22 weld neck flanges have the best resistance to pitting and stress corrosion cracking.

Used when large radius bends or curves are required, this method passes a piece of pipe or tube through a series of three rollers in a pyramid configuration to achieve the desired curve.

C276 is a nickel-molybdenum-chromium superalloy with tungsten added, designed for excellent corrosion resistance in a variety of harsh environments. The high nickel and molybdenum contents make nickel steel alloys particularly resistant to pitting and crevice corrosion in reducing environments, while chromium is resistant to oxidizing media.

C276 is forged between 2250/1750oF (1230/955oC) and then soaked at the forging temperature for 30 minutes per inch of billet or ingot section thickness. Forging should begin immediately, the billet is removed from the reheat furnace, a 25/40% reduction helps retain as much internal heat as possible. For optimum corrosion resistance, forged parts should be subsequently annealed. See Heat Treatment.

Alloy B (UNS N10001) was developed to resist hydrochloric acid. Hastelloy B2 has replaced it. Alloy B3 (UNS N10675) is a newer variant with higher thermal stability. These alloy B2 bolts are a wrought nickel molybdenum alloy that can be used in the as-welded condition. It is highly resistant to hydrochloric acid of all concentrations and temperatures. Known as UNS N10665 bolts, these bolts are also resistant to stress corrosion cracking and pitting.

Hastelloy X is a nickel-based superalloy ideal for gas turbine engine, aircraft, industrial furnace, and chemical processing applications.

Hastelloy alloy C22 socket weld flanges have excellent resistance to reduce and oxidizing media. It also helps to resists the formation of grain-boundary precipitates in the heat-affected zone.

Hastelloy C276 Welded Pipe is ideal for chemical process applications in the as-welded condition. By adding tungsten to ASTM B622 UNS N10276 alloy C276 pipe, its corrosion resistance becomes superior.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Alloy C276 plate is a high strength grade designed to be thicker than 6mm. The panels have a minimum tensile strength of 601mpa and a minimum yield strength of 204.8mpa. C276 composite panels are made by bonding two or metals in place. Meanwhile, Alloy C276 is resistant to oxidation at 1800¡ãF in the open air. However, alloy C276 is generally not recommended for high temperature service. The high molybdenum content makes alloy C276 prone to catastrophic oxidation under stagnant conditions, such as under solid deposits.

Hastelloy B2 is a nickel-molybdenum alloy especially suitable for handling equipment that reduces chemical environments. Such as applications in chemical processing industries involving sulfuric acid, phosphoric acid, hydrochloric acid and acetic acid.

These are available in different types and grades such as Monel 400 Forged Threaded Elbow, Nickel 200 Forged Threaded Equal and Unequal Tee, Inconel 600 Threaded Equal and Unequal Cross, Incolloy 800 Threaded Half and Full Threaded Fittings, UNS S4400 Threaded Reducers, UNS S2201 threaded caps, Hastelloy C276 threaded reducing inserts, etc.

Controlling other alloying elements such as iron and chromium

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The use of modular construction is directly influenced by the client¡¯s requirements for speed of construction, quality, added benefits of economy of scale, as well as single-point procurement.

ASTM B619 UNS N10276 Alloy C276 Tube covers 2 classes under this specification. In class 1, the Hastelloy C276 Tube is furnished in an as welded and solution annealed condition or these tubes could be welded along with being sized and solution annealed.

Exposures like this are regularly experienced during heat treatments that are linked with fabrication.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition.