ansi carbon stainless steel flange A694 flange

Hex bolts are used to fasten two or more parts together to form an assembly either because it cannot be manufactured as a single part or to allow for maintenance and repair disassembly. By definition “A Bolt is a headed and externally threaded mechanical device designed for insertion through holes in assembled parts to mate with a nut and is normally intended to be tightened or released by turning that nut.” When used with a preformed internally threaded (tapped) hole, the hex bolt’s head is turned to tighten, which technically makes it a screw (see our Tech Data section for a discussion regarding the differences between bolts and screws). Hex bolts are also known as: hex head bolts, cap screws, hex cap screws, hex head cap screws, machine bolts, hex machine bolts, hex head machine bolts and, if fully threaded, tap bolts, hex tap bolts and hex head tap bolts. A hex bolt is often differentiated from a hex cap screw by its underhead bearing surface: if it has a circular boss, called a washer face, it’s a hex cap screw¡ªif it doesn’t then it’s a hex bolt.

The tee can be equal tee to connect three equally sized pipes or unequal tee to connect unequally sized pipes.Forgings or forming operations could be perfomred by hammering, pressing, piercing, upseting, rolling, extruding, bending, fusion welding, machining, or by a combination of two or more above operations. Which the point of manufacturing is not to produce injurious imperfections in the fittings.

ASTM A106 Grade B pipe is equivalent to ASTM A53 Grade B and API 5L B on chemical position and mechanical properties, in general use carbon steel and yiled strength minimum 240 MPa, tensile strength 415 Mpa.

ASTM A234 specification does not cover cast welding fittings or fittings machined from castings.

Nuts are attached to corresponding bolts or rods to secure items. Cap nuts protect the threads of fasteners by preventing them from protruding. The locknut and locknut are locked on the bolt to prevent loosening. Thumb nut and wing nut are manually adjustable. The connecting nut is an extension for connecting two threaded rods.

The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.Common use material are ASTM A234 Grade WPB, WPC, WP5, WP9, WP11, WP22 and WP91. It covers the butt-welded pipe fittings of Elbow, Tee, Reducer, Cap and Cross, and some socket welding, threaded pipe fittings.

In this standard it covers the specification of elbows, tees, reducers, caps and cross, it usually adopt butt welding ends.

Depending on the needs of the application, the A234 Wpb Elbow Dimensions vary.

Carbon steel pipe is the most common use piping material in different industries served for construction, structural, liquid transmissions for water, oil and gas. Typical carbon steel pipe material grades in API 5L Grade B, X42 to X70, ASTM A106 B, ASTM A53 B, ASTM A252 Grade 3 and ASTM A333 Grade 6 etc.Mineral and slurry pipe is for the line pipe that applied in mining industries. A slurry pipeline is designated to transmit ores (Iron, Coal materials), or the industry mining waste, we called the pipeline as taillings. And generally these steel pipes connected in a long distances. Above materials mixed with water, we call slurry. People will use pumps to transport to the final destination then water will be filtered out. Since slurry contained different materials some with abrasive properties, so the pipe could be coated with 3PE, FBE layers to against from corrosion.
Both carbon steel pipe in seamless or welded could be used for the transmission of the slurry. So there is a wide range of material and standards available options to suit for the special working conditions.

As a leading manufacturer, we produce fasteners in most varieties and grades. Please feel free to contact us for more information on different types such as carbon steel threaded rods and other prices.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Our A105 Flange ANSI B16.5 are meant for non-critical conditions, as they have a low Carbon content. We have largest ready stock of Carbon Steel ASTM A105 Flange such as Weld Neck, Slip On, Socket Weld, A105N Orifice, Blind, Spectacle Blind Flanges, Ring Type Joint Flanges (RTJ) , Screwed / Threaded Flanges, and CS A105 Reducing Flanges, etc.

The fittings can also come with different types of surface treatments such as the rust-proof black oil or hot galvanized and transparent oil treated.The raw material for making ASTM A234 fittings hall be fully killed, consisting of forgings, bars, plates, sheet, and seamless or fusion-welded pipe products with filler metal added and shall conform to the chemical requirements of Table 1.

The increase of carbon element content makes the steel sturdier and stiffer after the heat treatment, and it also becomes less ductile. Without the heat treatment, higher carbon will reduce weldability.

ASTM A694 f60 flanges are also available in different functional types such as blind flanges, reducer flanges, butt weld flanges, etc.

The heated carbon steel is then machined into the forged steel fittings. carbon steel astm a105 fittings is used for ambient- and higher-temperature service in pressure systems.

A105 Forged Steel Fittings can be ordered to meet the customer requirements by getting them customised according to the instructed dimension . The ASTM A105 Fittings Dimensions are also available as per industry standards such as MSS, ASME and API specification. The A105 Forged Fittings specification are has a limit of up to 10,000 lbs.

Pressure-Temperature Rating of ASTM A350 Gr. LF3 flanges are identical to ASTM A105 flanges.

A515 grade 70 carbon steel has the advantage of high strength due to its machinability and formability characteristics. Due to their high chromium content, these carbon steels have excellent corrosion resistance in many media.

Carbon steel ASTM A105 socket weld forged fittings are usually ¡°normalized¡± heat treatment, devoid of any internal stresses and thus having superior performances.

ASTM A105 pipe fittings is used for installing or repairing piping or tubing systems that convey liquid, gas, and occasionally solid materials. sa 105 fittings comes in a variety of sizes to fit the pipe they will connect. It is useful to combine, divert or reduce the flow of the water supply.

U-Bolt medium carbon steel contains 0.3-0.59% carbon, which provides the alloy with increased strength and good wear resistance. It is easy to machine and is used for forging and auto parts. High carbon steel and ultra-high carbon steel are very strong and are used in springs and high strength products. These alloys can be tempered to very high hardness without becoming brittle and are used in very high wear applications. The carbon content of these alloys is 0.6-0.99% high carbon steel and 1.0-2.0% ultra-high carbon steel.

The carbon steel gets its mechanical properties and physical properties from this material composition. A350 Lf2 Cl1 Flanges are the one which deliver excellent performance and are generally meet the demands. The steel shall be produced by any of the following primary processes: Open-hearth, basic-oxygen, electric-furnace or vacuum-induction melting (VIM).

Some of its applications are power generation, pulp and paper industry, power offshore oil drilling industry, specialty chemicals and pharmaceuticals. Other applications where it is found to be used are condensers, gas handling, chemical equipment, seawater equipment, pharmaceutical equipment and heat exchangers.

ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 Pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships, where the pipes must transport fluids and gases with higher temperature and pressure levels .

pipe is usually welded to the Lap Joint flange and it is free to rotate around the stub end. It is frequently used for applications that needs frequent dismantling.There are different types such as the SA105N Blind Flange which is used to close a pipe line.

A105 Flanges are disc-shaped parts, which are the most common in pipeline engineering. Flanges are used in pairs and matched with them on valves. In pipeline engineering, flanges are mainly used for pipeline connections. In the pipelines that need to be connected, flanges can be installed in a variety of ways. Wire connection flanges can be used for low-pressure pipelines, and welding flanges can be used for pressures above 4 kg. Add a washer between the two flanges, then tighten with the bolts.

Sorf and Blind flanges are common types of flanges in the A105 grade. These flange types can be distinguished based on certain aspects.

These fittings commonly used in pressure pipelines and pressure vessel/tanks at lower temperature.

For industrial purposes, in pipeline systems usually we need to change the transmission direction; Adjust fluids (oil and gas, water, slurry) flow rate; Open or close the pipelines, etc. So to complete these activities, steel pipe fittings will be applied.