ansi round id 2inch welding stainiless tri clamp stainless steel 304 ferrule flange pipe

Although molybdenum is a good element, excessive use of it may reduce the creep ductility of Gr F11 plate flanges. Graphitization and decomposition of iron carbide may occur when the temperature exceeds 500 degrees Celsius. Chromium has been added to SA A182 F11 alloy steel CL.2 forged pipe flanges to prevent creep ductility reduction and graphitization. In addition, the added chromium also provides oxidation resistance.

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Flange is the parts which connects two pipe ends, flange connection is defined by the flange, gasket and bolt three are connected as a group of combined sealing structure of the detachable connection. The gasket is added between the two flanges and then fastened by bolts. Different pressure flange, thickness is different, and the bolts they use are different, when pump and valve connect with pipe, the parts of the equipment are also made of the corresponding flange shape, also known as flange connection, usually closured bolted connection parts are also known as flanges, such as the connection of ventilation pipe, this kind of parts can be called “flange type part”, but this connection is only part of a device, such as the connection between flange and water pump, it’s not inapposite to call water pump as flange type parts,but relative small valve,it can be called as flange type parts .

These flanges have excellent corrosion resistance compared to 304 grade stainless steel flanges. We manufacture stainless steel 316L blind flanges of high quality for use in piping in critical conditions. This is an austenitic stainless steel.

Stainless Steel 316L Flanges are low carbon version flanges of the 316 flanges. These are one of the most used flanges in the world next to the 304, 304L and 316 flanges.

304 stainless steel flanges are considered the most basic stainless steel, also known as grade 18-8, with higher chromium content and lower carbon content. The presence of low carbon content in the alloy limits the formation of carbide deposits during welding while minimizing the susceptibility of 304 stainless steel flanges to intergranular corrosion.

Weld neck flange and long weldneck flange provide reinforcement in application requiring high pressure and during low and high pessure extremes. It also helps in low cycle fatigue caused by line expansion of other variable forces. Weldneck flange bore is machined to match the ID of the pipe or fitting.

Stainless steel flanges are often used for the installation of various pipelines, especially large and long distance metal transmission pipelines. Flanges are used for long-term pipelines.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Grade F22 is a low alloy steel grade with a chromium content between 2% and 2.5%. The content of chromium and molybdenum is twice that of F11 grade. However, due to the maximum content of all alloying elements up to 5%, it is classified as a low alloy steel grade. As a low alloy steel grade, ASTM A182 F22 flanges outperform carbon steel, especially in applications involving high temperatures.

One tension test shall be made for each heat of ASTM A182 F51 flanges. One set of three Charpy V-notch tests shall be performed for each heat of products.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

The purpose of preliminary heat treatment: to eliminate some defects in blanks and semi-finished products, and to prepare organization for subsequent cold working and final heat treatment.

SS 316/316L Flanges are one of the most commonly sought after products in the industry. These SS Flanges are known for their properties such as better corrosion resistance, pitting and crevice corrosion when compared to type 304.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Typical applications for steel include: food preparation equipment, laboratory equipment, chemical containers for transportation, springs, heat exchangers, mining screens, coastal building paneling, railings, trim, marine fittings, quarrying and water filtration. One of the main differences between 316l stainless steel and 316 stainless steel is that the carbon content of the former is as high as 0.03%, and the carbon content of the latter is as high as 0.08%. These differences give them different properties. Let’s learn more about the 316l stainless steel alloy.

SS 347 Weld Neck Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

This specification includes flanges for pressure vessel grade applications. The material has good strength and general corrosion resistance, high operating temperature. The minimum yield strength of 304 stainless steel flange is 215MPa, and the minimum tensile strength is 505MPa.

Butt weld flanges are available in a variety of materials. These materials must meet standards. Materials should also be of quality as specified by ASTM or ASME standards. However, the thickness and inner diameter of the flange will depend on the size of the pipe from which this butt weld flange is made.

254 SMO Flanges, which is used in varied industrial and commercial sectors and is quality assured. SMO 254 Slip On Flanges (UNS S31254) is often used in Flue gas desulfurization scrubbers, Components used in petroleum production, Food processing equipment and more.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

The blind flanges are used to terminate a pipeline. Most of the times, a blind flange is used to permanently close a connection. Great Steel & Metals also produces Werkstoff No 1.4401 Stainless Steel Pipe Flanges in other shapes. The 316 material is more corrosion resistive and stronger than the ordinary 304 stainless steel.

Where welding is required, the steel has the property of cracking as it cools. The high temperatures of the welding process cause what is known as “hot embrittlement” as the steel cools. This makes structures built with high carbon content steel more susceptible to damage due to the formation of cracks in areas where the metal is welded. 316l stainless steel alloy is used in a variety of applications as it is well suited to avoid weld corrosion. It can also withstand high temperatures and has a high melting point at about 2,500 degrees Fahrenheit or about 1,370 degrees Celsius. In addition to carbon, this alloy contains up to 2% manganese and up to 0.75% silicon.

ASME B16.5 slip flanges are a quality and safety standard trusted by various industries. These standard flanges are used in various industries such as oil and gas, petrochemical, fire water lines and more.

Our supplied 309 Stainless Steel Flanges are hardness test and other mechanical tests of tensile of the area and so on before packaging and transportation to guarantee long lasting service to the customers.

The weld neck provides extra grip while the raised face provides extra surface for attachment. These flanges are also strong with 205MPa minimum yield strength and 515MPa minimum tensile strength. The?SS 304L SORF Flange?is a slip on raised face flange made in the 304L material.

Flanges made of stainless steel are called “stainless steel 304 flanges”, also referred to as “SS 304 flanges”. Common material standards and grades include ASTM A182 Grade F304/L and F316/L, with pressure ratings of 150 to 2500 and 300 to 600, respectively.

Stainless Steel Blind Flanges are mostly used to seal the end or opening of a pipe, which is why they come without a bore. This comes in handy for inspection and pressure tests, as it allows quick access to the pipe.

SS 904L Weld Neck Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

In most cases, the corrosion resistance of our stainless steel 316 butt weld flanges is about the same in most corrosive environments.

Duplex Steel UNS S31254 Slip On Raised Flanges combines moderate mechanical strength (typically over 300 MPa yield strength) and high ductility with excellent corrosion resistance in seawater and a variety of industrial environments.

Grade 304 stainless steel is the standard “18/8” stainless steel; it is the most versatile and widely used stainless steel available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of grade 304 enables deep drawing without intermediate annealing, which makes this grade dominant in the manufacture of drawn stainless steel components such as sinks, hollowware, and pans.

Stainless Steel 316 Flanges are made up of an austenitic stainless steel that has chromium, nickel and molybdenum in the content. The 4% molybdenum addition to the composition makes a difference in the mechanical properties as well as physical properties.