asin 1060 carbon steel round bar 8 mm ASTM 694 F56 bar in fabrication

Carbon steel forged fittings and flanges are prevalent and common used in industries, the representative material grade is ASTM A105 and A350 LF2/LF3.

ASTM A105 Carbon Steel Round Bars are available in a variety of sizes, standards, names and custom lengths according to customer requirements.

High carbon steel bolts have a carbon content between 0.60 – 1.25%. High carbon steel alloys have manganese content in the range of 0.30 – 0.90%. Of all three grades, high carbon steel threaded rod has the highest hardness and toughness while exhibiting the lowest ductility. The high wear resistance comes from the fact that these screws are almost always hardened and tempered.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

Carbon steel is defined as any steel with a carbon content not exceeding 2.1% by weight. As the carbon content increases, the ductility of the steel decreases, and carbon steel bolts become harder and increase in strength after heat treatment.

Nuts are attached to corresponding bolts or rods to secure items. Cap nuts protect the threads of fasteners by preventing them from protruding. The locknut and locknut are locked on the bolt to prevent loosening. Thumb nut and wing nut are manually adjustable. The connecting nut is an extension for connecting two threaded rods.

We are manufacturers, suppliers and exporters of Carbon Steel A105 / A105N Flanges, which, the American Society for testing materials, classifies as a standard that covers forged Carbon-Steel piping parts that also include carbon steel pipe flanges, which are serviceable in pressure systems at room temperatures as well as temperatures higher than it.

The ASTM A333 Grade 6 low alloy steel seamless pipes are intended for low temperature services with minimum design temperature -45°C [-50°F] requiring notch toughness. They are usually furnished in nominal pipe size (NPS) and nominal wall thickness with schedule numbers in accordance with ASME B36.10M.

A350 LF2 Welding neck flange are used in many pressure parts, machine tools, pump shafts and many others. This is available in many sizes and is available in stock. carbon steel a350 lf2 flanges contains up to about 1% carbon and 1.65% manganese and other elements are present in quantities too small to affect its properties. They are used in all kinds of industries and clients appreciate the efforts put forth by the manufacturing department. Each range is packaged in quality-guaranteed material.

For the pipe fittings of small size, such as tee, tee and elbow of socket welding and thread, the shape is relatively complex, so the die forging process should be used.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In seamless fitting form it has size ¡°1/2 to 24¡± and in welded form¡±24 to 96¡± and thickness is available in SCH 10,20,30,40,80,100,120,140,160,XXS. It has dimensions like ANSI/ ASME B16.9, B16.28, MSS-SP-43.

ASTM A105 is most commonly used for carbon steel material grade which is used to manufacture forge piping components such as flange and forged fittings of small diameter piping. A105 flange has Tempering of 1100 F followed by air cooling. We are biggest Manufacturer of A105 Steel Flanges.

ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges.

These alloy steel wp22 seamless pipe fittings are produced with the aim to provide better performance and fulfill all the requirements of industrial applications.Our A234 WPL22 Street Elbows have both the ends threaded, thus affixing on pipes in the drainage, plumbing, and water piping systems effortlessly.

ASTM A516 plate can be used to make flange blinds, reducer flanges without hubs, plate flanges, eyeglass blind flanges (Figure 8 blank flanges), spacer flanges, paddle blanks, and more. These flanges shall be in accordance with manufacturing standard specifications ASME B16.5, ASME B16.48, EN 1092-1, AS 2129 and ASME B16.47 etc.

We are also shareholders of carbon steel pipe fittings, such as carbon steel butt welding elbows, butt welding carbon steel crosses, butt welding carbon steel tees, butt welding carbon steel end caps, carbon steel butt welding short pipe ends, etc.

Due to the high chromium content, these carbon steels have very good corrosion resistance.

ASTM A106 is the same as ASME SA-106 and is the standard specification for carbon steel seamless pipe for high temperature service. It covers pipe sizes from NPS 1/8 [DN 6] to NPS 48 [DN 1200] with nominal wall thicknesses given in ASME B36.10M.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A234 is the standard of pipe fittings material,it indicates the materials properties of different kinds of carbon steel and alloy steel,WPB is one of the steel grade in this standard.W means weldable,P means pressure,B is grade b,refer to the minimum yield strength,like the astm A106 A53,Gr.B or API 5L Gr.B.A234 WPB is the most common carbon steel pipe fittings material.

Alloy Steel Buttweld Fittings is a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment. It has many inherent advantages such as it provides permanent leak proof to the fittings. The continuous metal structure formed between fitting and pipe gives strength to the system. Smooth inner surface and gradual directional changes minimize the action of corrosion and erosion and reduce pressure losses and turbulence. It doesn’t make it any less vulnerable to rust when exposed to the elements since it is ferrous

ASTM A350 LF2 CS round bars are often forged and extruded, but are not easily welded due to their tendency to crack.

a105 lap joint flange slide directly over the pipe and are most commonly used with stub end fittings.

The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.Common use material are ASTM A234 Grade WPB, WPC, WP5, WP9, WP11, WP22 and WP91. It covers the butt-welded pipe fittings of Elbow, Tee, Reducer, Cap and Cross, and some socket welding, threaded pipe fittings.

This grade of the fitting is used in constructions for use in pressure piping and pressure vessel service at low temperature. Also, this fitting is available in two types in welded and seamless.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

HT PIPE is the undisputed industry leader, offering the most comprehensive line and inventory of carbon steel fasteners, including bolts, nuts, washers, socket head cap screws, and metal threaded screws of all sizes, including all grades. A broad product portfolio covering all aspects and requirements of the industry, providing quality products that you can use with confidence