ASME B16.5 Alloy Steel Flange for food production plants

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

AISI 4130 grade is a low alloy steel with elements such as chromium and molybdenum added as strengthening agents in its distribution. AISI 4130 pipe is more receptive to treatment by heat or mechanical means than conventional carbon steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.64

These ASTM A182 alloy steel F12 flanges are corrosion resistant. ASTM A182 alloy steel F12 flanges also have high dimensional accuracy.

Too many good properties found in the same product just because of better sheet production. These are high tensile strength, good dimensional accuracy, surface finish, flexibility and durability, withstand heavy loads, strong construction and corrosion resistance. Resistance to corrosion, stress corrosion cracking, crevice corrosion cracking, oxidation/pitting corrosion makes it suitable for a variety of applications.

Alloy Steel F11 Flanges specifications are also mentioned and the face type starts from flat face, raised face, ring type joint and many more.

Chromium (or chromium) in A335 is an essential element in stainless steel production. Steel products are defined as stainless steels with 12% or more chromium added. Chromium is widely used due to its excellent heat resistance properties and is irreplaceable in terms of resistance to oxidation in high temperature applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P96

ASTM A182 F11 flange has various dimensions and sizes such as 1/2″ to 36″. This is used in class like 150#, 300#, 600# and many more.

B8M Grade 1 fasteners require carbide solution treatment, while Grade 2 fasteners require additional strain hardening operations to increase strength and reduce susceptibility to wear.

WPHY 52 Fittings are recommended be heat treated by one or more of the following procedures: annealing (stress relieving), normalizing, normalizing and tempering, quenching and tempering.Made utilizing high-grade crude materials, these ASTM A860 WPHY Pipe Fittings are anti-corrosive and strong.

It must be slid into the pipe before welding. In this case, it’s a double weld on both sides (i.e. inside and outside), so it provides durability that helps avoid leaks.

Other than carbon, these contain in them substantial quantities of nickel, manganese, chromium, silicon, tungsten, vanadium, molybdenum.

ASTM A320 Grade L7 is a material specification for bolts, studs, nuts, and other fasteners designed for high temperature bolting applications. ASTM A320 L7 grades are divided into 4 performance classes, A, B, C, and D, each with different tensile and stress rupture properties. Class 660 fasteners are used to bolt boilers, pressure vessels, pipe flanges and valves for high temperature service.

The ANSI B16.5 Alloy Steel Slip On Flange is a flange type that allows the pipes to slip onto the flange and makes the connection in a precise locations.

The carbon form can be iron carbide or Alloy Steel F9 Weld Neck Flanges can be carbide of an alloying component, for example, titanium. The A182 F9 Steel Slip On Flanges are good for use with seamless pipes because the flanges allow for the pipes to slip onto them for precise location for the connection.

The precise properties of our A335 tubing meet the most stringent requirements. We meet all requirements for standard and non-standard size alloy steel products. We are a regular supplier of alloy steel products in a variety of styles, standards, models and custom sizes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.31

This ASTM A182 alloy steel flange has a smaller thickness for easier placement of bolt holes. These ASTM A182 F12 alloy steel pipe flanges are suitable for high temperature and high pressure environments.

Alloy steels are used in boiler construction because they are inexpensive, readily available, easy to form and weld into desired shapes, and, in a wide range, have sufficient resistance to oxidation and corrosion to provide many industries with years of satisfaction service. Alloy steels are used in a range of demanding applications in the aerospace and power (nuclear) industries. Alloy steels are also found in applications where their response to magnetism is important, such as in transformers and electric motors.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.48

Grades 7, 7M, 8 and 8M have 8-10% nickel added. Grade 8 material lacks molybdenum, but Grade 8M ASTM A194 2h material contains all the elements mentioned in the composition, making it the strongest and most expensive class of materials in this grade.

Producing Standard
ASME B18.2.2
DIN 934 

Alloy Steel Flanges are made in different steel alloys. The flanges vary in dimensions and types. There are ? inches through 48 inches of nominal diameter sizes of flanges.

Alloy 32750 is a super duplex stainless steel supplied in hot worked and solution annealed conditions. As a super duplex stainless steel, it combines the desirable aspects of austenitic and ferritic steels. Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature over 50¡ãC.

A333 P92 steel is American steel grade ASTM A335 P92, which is a martensitic heat-resistant steel. In recent years, it has been widely used in thermal power plants, mainly for main steam pipelines and reheat steam pipelines. The main alloy components are Cr: 9%, Mo: 1%, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.59

A335 grade P9 alloy steel round pipe is your best choice. It surrounds pipes made of alloy steel. It’s graded very well, making it unique. It has excellent properties such as toughness, durability, weldability, and low electrical conductivity.

Our alloy steel ASTM A182 F5 butt weld flanges can be used in auxiliary industrial high pressure services such as condensers, boilers, evaporators, heat exchangers and more.

WPHY 52 Pipe fittings are manufactured as per MSS SP 75 shall be furnished in the heat treated condition.We offer a wide assortment of ASTM A860 WPHY 52 Fittings that cater to the prerequisite of different industries such as engineering, chemical, refineries, machine apparatuses, and numerous others.

A182 F2 round bar has high strength, formability and hardenability.

A182 F91 Wrought alloy steel tubes, flanges, wrought fittings and valves and other components for high temperature use.

ASTM A320 L7M Grade AS Fasteners are commonly used in oil and gas exploration and processing equipment – piping, piping and heat exchangers.

S32205 is a duplex stainless steel with twice the strength of austenitic stainless steel. Duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength, good impact toughness and good overall and local stress corrosion resistance. The yield strength of duplex stainless steels is twice that of austenitic stainless steels, a feature that allows designers to reduce weight when designing products, making this alloy more affordable than 316, 317L. This alloy is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some limitations, especially when applied to welded structures. Duplex stainless steel has twice the compressive strength compared to austenitic stainless steel, and designers can reduce its weight compared to 316L and 317L. Alloy 2205 is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range, and can also be used at lower temperatures under severe restrictions (especially for welded structures).

SA 182 Gr F1 Slip on Flanges also known as SO flanges. This is a flange that slides over the pipe and has an internal design that is slightly larger than the pipe.

Seamless steel tubes in ASTM A333, reheated and controlled at temperatures for hot working and hot finishing operations to finishing temperatures ranging from 845 to 945¡ãC [1550 to 1750¡ãF] and cooled in air or in air. Controlled atmosphere furnaces from initial temperature over 845¡ãC [1550¡ãF]. For ASTM A333 Grades 1, 6, and 10 Seamless Steel Pipe, heat treatment can be performed from a uniform temperature in excess of 815¡ãC [1500¡ãF], then quenched in liquid and reheated to the appropriate tempering temperature, this heat treatment ASTM A333 4.3.1 The above treatment scheme can also be replaced.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.54

Through tests and production tests, molybdenum in A335 is currently the most effective additive for improving high temperature creep strength. Molybdenum-added seamless steel pipes also show enhanced corrosion resistance and inhibition of pitting corrosion.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P95