ASME B16.5 bleed ring socket weld reducing orifice valve blind flange hub

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Chromium confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions.

Inconel 600 can be used where end use requires high surface stability. As a superalloy, Inconel 600 is known to have good creep and good oxidation resistance.

INCONEL 718 alloy was primarily chosen by design engineers for its high strength in extreme temperature conditions at both ends of the spectrum. It can be used from low temperatures all the way up to 1300¡ãF/704¡ãC. It exhibits extremely high yield, tensile and creep rupture properties across the entire range. It also exhibits excellent tensile and impact strength.

Our Inconel 718 Forged Round Rod and Inconel 718 Bright Rod exhibit high burst and tensile properties even at high temperatures.

Inconel 601 flanges are made of nichrome. Its material grade varies with the composition ratio. The composition of grade 601 is 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron. And it has different types such as socket welding flange, butt welding flange, Inconel 601 sliding flange, orifice flange and so on. Flanges made of this material are strong, resistant to acids, reducing agents and oxidation, and are harder to resist corrosion in many harsh environments.

Fasteners have excellent resistance to pitting and crevice cracking. In addition, we offer fasteners with excellent resistance to water corrosion, general corrosion and chloride stress corrosion cracking.

Normalizing: heating steel or steel parts to an appropriate temperature above the critical point AC3 or ACM for a certain period of time and then cooling in air to obtain a heat treatment process of pearlite structure.

By itself, nickel has great heat resistance properties, but when alloyed with other elements, it gains many properties, just like in the case of the Inconel 600 Flanges.

Inconel 600 alloy is specially made to use high-temperature application and it can be bear up to 2000 degree F temperature. The high nickel content increases its specific quality like improve resistance in reducing the environment, resistance to corrosion by many inorganic and organic elements. Because of nickel alloy the Inconel 600 alloy resistance to chloride stress corrosion and also resistance to many acids.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Alloy 625 (UNS N06625) is a nickel-chromium-molybdenum alloy with an addition of niobium.

The results reveal that Inconel 625 is excellent in resist the corrosion attack in seawater. However, at increasing temperature, the corrosion resistance of this metal decrease.

This combination of the four most predominant elements in inconel 625 also gives Inconel 625 wn flange grade 150 excellent resistance to a variety of unusually severe corrosive environments and high temperature effects such as chemical oxidation and carburization effect.

UNS NO 6625 WN Flangs Alloy 625,inconel 625 flange,UNS N06625 Flange is a nickel-chromium-molybdenum alloy that is used for its high strength, high toughness and excellent corrosion resistance. The strength of alloy 625,UNS N06625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix. Although the alloy was developed for high temperature strength, its highly alloyed composition also provides a significant level of general corrosion resistance.

Inconel 718 has become useful in a wide range of applications ranging from manufacturing operations to military equipment and the aerospace industry.

Inconel UNS N06601 Pipe Flanges Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000¡ãF (1095¡ãC).

They can be welded easily and resist post-weld carburization or graining.

Inconel 718 flanges have good machinability and excellent weldability with or without filler metal added. Inconel 718 Pipe Flanges are available in a variety of sizes, gauges and thicknesses.

Inconel UNS N07718 sheet is resistant to oxidation over its service temperature range. The slow precipitation hardening reaction of Inconel Din 2.4668 sheet makes it easy to weld without hardening or cracking.

Inconel 625 is an alloy that also performs well at lower temperatures. Temperature changes can cause the alloy tube to expand or contract. Therefore, materials with good ductility, such as Inconel 625 pipe, should be selected for piping systems with temperature fluctuations, especially because of their good properties.

ASTM B564 601 Long WN Flange nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

The high nickel content in Inconel 600 alloy forged bars enhances the alloy’s corrosion resistance to many organic and inorganic compounds. The presence of nickel also renders Alloy 600 nickel hot rolled bars virtually immune to chloride stress-related corrosion cracking.

Reactor vessels and heat exchanger tubing used in the production of vinyl chloride.

At elevated temperatures the annealed and solution annealed alloy shows good resistance to scaling and has high strength. The alloy also resists ammonia bearing atmospheres, as well as nitrogen and carburizing gases.

Nickel Alloy 600 works well with most alkaline solutions and sulfur compounds and also provides lower rate of attack from chlorine or hydrogen chloride.

Inconel 718 Nuts, also known as Alloy 718, are a precipitation hardening (also known as age hardening) form of Inconel 625. This heating and quenching process is used to change the atomic structure of the alloy, making it stronger by locking the metal’s grain structure in place. Additional strength can be obtained by cold working.

Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium.

ASTM B564 NO2200 WN flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Nickel alloy 718 hex nuts are typically used in high strength and high temperature applications up to 700 degrees Celsius. Due to their excellent mechanical properties, DIN 2.4668 flat washers also work well in cold environments.

This grade has an excellent chemical combination of nickel, chromium alloys with high levels of iron, niobium and molybdenum and small amounts of aluminum and titanium.