Asme B16.5 Long Weld Neck Lap Joint 20″ Slip On 304L X 150 Flange Plate

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Al eliminar los articulos defectuosos, un equipo de trabajadores profesionales nunca ralentiza el proceso de produccion. La recomendacion de velocidad de corte para SMO 254 es mas baja y mejora la maquinabilidad del acero en comparacion con otros grados como 316/316L.

ASTM A213 / A269 standard specification is applied for seamless stainless steel tubing, ASTM A249 / A269 for welded tube, with both bright annealing finish and annealing pickling finish, generally, seamless coil tubing can be provided in no risk of impurities that are often associated with welding tube, seamless tubing is the preferred option for critical applications.

321 Stainless Steel (UNS S32100/ASTM A193 B8T) is a very close relative. While 347 stainless steel is stabilized by the addition of niobium and tantalum to resist intergranular corrosion, 321 is stabilized by the addition of titanium. By adding niobium and tantalum, this material prevents the formation of chromium carbides. Since these elements have a stronger affinity for carbon than chromium, niobium-tantalum carbide precipitates within the grains rather than forming at the grain boundaries.

In industries that handle nitric acid, grade 304 stainless steel threaded pipe flanges can be used at temperatures up to 176¡ãF. 304 stainless steel flanges are durable and less expensive than other alloy types. Due to the oxidizing properties of this solution, it will rapidly cause disintegration if used at concentrations above 55%.

ASTM B649 UNS N08904 Flange
Featuring 904 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Alloy 304/304L is non-magnetic in the annealed condition, but can become slightly magnetic as a result of cold working or welding. It can be easily welded and processed by standard shop fabrication practices.

The Stainless Steel 304 Fittings one of the most commonly used types of pipe fittings all over the world.

Stainless steel flanges will not be corroded, pitted, rusted and easy to wear. Stainless steel is one of the metal materials with the highest strength for building.

The corrosion resistance performances of 304 ss pipe is the key feature for stainless tube. The commonly used types of steel involve ferritic and martensitic steel, that are predominantly made by adding chromium and manufactured through heat-treatment or to be annealed.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

El tubo electropulido SMO 254 tiene una excelente resistencia a una amplia gama de entornos atmosfericos y muchos medios corrosivos. La tuberia hexagonal SMO 254 experimentara corrosion por picaduras y grietas en ambientes calidos de cloruro y agrietamiento por corrosion bajo tension por encima de los 60 grados centigrados.

ASTM A860 WPHY 52 Fittings are made up of a high yield carbon steel with carbon, manganese, sulfur, phosphorus, silicon, nickel, chromium, molybdenum, copper, titanium, vanadium and cobalt in the composition.The increased durability ensures a long work life, therefore proving that the A860 WPHY 52 elbow is a cost saving solution.

There are many different types of 316 stainless steel. Some common types are the L, F, N, and H variants. Each is slightly different and each serves a different purpose. “L” means 316L steel has less carbon than 316.

The low carbon content of stainless steel 304 hex bolts minimizes chromium carbide precipitation from welding and its susceptibility to intergranular corrosion. SS 304 Nuts and Bolts are available with up to 515MPa minimum tensile strength and 40% elongation with a maximum hardness of 201HB. Steel bolts are high strength steel alloys and are the strongest commercial quality bolts. High mechanical properties come from the chemical composition of carbon, manganese, silicon, phosphorus, sulfur, chromium, nickel and nitrogen.

Among many applications, products include instrumentation components for the mechanical, chemical, petroleum, watchmaking, food and beverage, and medical industries.

316L can be used in large diameter annealed condition or small cross section cold worked condition.

904L grade stainless steel is unlike any other steel. Due to its extra amounts of chromium, molybdenum, nickel and copper, 904L steel features superior resistance to corrosion, rust and acids.

Alloy 310S, like 309S, is known for high temperature applications. Both alloys work well at temperatures up to 2000¡ãF, especially where oxidation resistance is required. 310 stainless steel is an austenitic chromium-nickel stainless steel with good oxidation and corrosion resistance due to the high ratio of chromium to nickel.

For 304 stainless steel pipe corrosion resistance,excellent performance in a wide range of atmospheric environments and many corrosive media. Pitting and crevice corrosion can occur in warm chloride environments, and stress corrosion cracking can occur above about 600C. It is considered to be tolerant of drinking water up to about 200mg/L chloride at ambient temperature, dropping to about 150mg/L at 600C.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

Alloy 904L outperforms other austenitic stainless steels due to the higher degree of alloying of nickel and molybdenum.

The lower carbon content of the stainless steel 304 thread bar reduces chromium carbide precipitation from welding and its susceptibility to intergranular corrosion. Stainless steel 304 studs are not particularly thermally or electrically conductive and are non-magnetic. The large number of Style 304 Stud Bolts we manufacture today can be used in products related to the food and beverage industry. These AISI 304 studs are ideal for milk processing, brewing and winemaking as well as yeast trays, pipes, fermentation vats and storage tanks.

304 and 304L can be specified in annealed conditions with very good formability. Higher nickel versions can be specified for enhanced multi-stage deep drawing characteristics. For spring type applications, Types 304/304L can also be specified in higher strength cold work conditions. Type 304/304L is non-magnetic in the annealed condition, but may become slightly magnetic by cold working.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

304, 304H and 304L all have the same nominal chromium and nickel content and therefore have the same corrosion resistance, ease of manufacture and weldability.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.32

304L stainless steel, also known as ultra-low carbon stainless steel, is a versatile stainless steel material that is widely used in the manufacture of equipment and parts that require good comprehensive properties (corrosion resistance and formability).
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.22

Because they are produced according to specification ASTM A182, they need to meet certain requirements, such as yield and tensile strength properties. Other mechanical properties required for Sa182 F22 threaded flanges include Brinell hardness and elongation equivalents. In order to improve the properties of the alloy, these parts need to undergo a predetermined heat treatment process. These prerequisites include the type of heat treatment used on the Astm A182 F22 alloy steel flange and the temperature at which it will be performed. During heat treatment, in addition to the quenching process to be carried out, other prerequisites include the medium to which the Astm A182 F22 forged flange is to be cooled.

A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500. It used in more industries than carbon steel as stainless steel has better resistant performances on corrosion environment and always provides with a good appearance.

Various cuttings techniques such as plasma cutting saw cutting, dynamic waterjet cutting, machine cutting, laser cutting, etc are applied for the processing of Stainless Steel 347H Plates.

Stainless steel flanges are often used for the installation of various pipelines, especially large and long distance metal transmission pipelines. Flanges are used for long-term pipelines.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

For applications where stainless steel tubing or piping must come into contact with food and other sensitive products, sanitation is a high priority. Stainless steel sanitary tubing is used in such applications because it has high corrosion-resistance, doesn¡¯t tarnish, and is easy to keep clean.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”