asme b16.5 pl flange 150# dn100 nickel alloy flange SW flange Inconel 718 WERKSTOFF NR. 2.4668 flange

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 625 bar is typically part of the types of equipment used in marine applications such as heat exchangers, fasteners and cable jackets.

The ASTM B166 specification is the standard for Alloy 718 ASTM B166 hot rolled bar.

INCONEL (nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

Process equipment used in the production of chlorinated and fluorinated hydrocarbons.

The unique combination of its components makes Inconel 625 highly resistant to corrosive substances.

Inconel 718 flanges have excellent mechanical properties over a wide temperature range. These Inconel 718 flanges have high creep rupture strength at elevated temperatures up to approximately 700 degrees Celsius (1290 degrees Fahrenheit).

Inconel 718 is a high strength, corrosion resistant nickel-chromium material that can be used in temperatures from -423¡ã to 1300¡ãF. Inconel 718 age hardening alloy can be easily fabricated, even into complex parts. The welding characteristics of Inconel 718, especially its resistance to post-weld cracking, are excellent.

Its outstanding strength and toughness in temperature ranges from cryogenic temperatures to high temperature up to 2000¡ã F (1093¡ã C) are derived primarily from the solid solution effects of the refractory metals Columbium and molybdenum in a nickel-chromium matrix.

The alloy is also resistant to ammonia-containing atmospheres as well as nitrogen and carburizing gases.

Incoloy 800, also known as Alloy 800 or UNS N08800, is an iron-nickel-chromium alloy with good creep & stress-rupture strength and excellent resistance to oxidation, sulfurization and carburization in high-temperature services. It also resists corrosion by many aqueous

Inconel 625 combines heat resistance, corrosion resistance and strength. Inconel 625 fasteners are used in environments ranging from low temperatures to 1800o F (1000o C). Antioxidant is the main feature. Like alloy C276, Inconel 625 is a nickel-chromium-molybdenum alloy. Adding niobium results in a stronger material. Common applications are marine environment and pollution control equipment.

Its high nickel content, a minimum of Ni 72%, combined with its chromium content, provides users of Nickel Alloy 600 a number of benefits including: Good oxidation resistance at high temperatures, Corrosion resistance to both organic and inorganic compounds and Resistance to chloride-ion stress corrosion cracking.

Inconel X750 is a superalloy that has excellent properties enabling it to exhibit high strength at high temperatures, excellent corrosion resistance, and good oxidation resistance up to 1300¨H.

Alloy 600 is a popular engineering material for applications requiring heat and corrosion resistance. The alloy’s excellent mechanical properties give this material high strength and good machinability. Good corrosion resistance, especially in alkaline environments, and can be used for low and high temperature service.

B564 601 Spade Flange Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition. There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

Its typical corrosion applications include titanium dioxide production (chloride route), perchloroethylene synthesis, vinyl chloride monomer (VCM) and magnesium chloride. Alloy 600 is used in chemical and food processing, heat treatment, phenol condensers, soap making, vegetable and fatty acid containers, and more.

INCOLOY alloy 800 is an alloy of nickel, iron and chromium. The alloy is capable of remaining stable and maintaining its austenitic structure even after long time exposures to high temperatures. Other characteristics of the alloy are good strength, and high resistance to oxidizing, reducing and aqueous environments

Astm B564 Uns N06601 Flanges Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Inconel 625 round bar is a nickel-chromium-molybdenum-based alloy. This makes it very good at resisting non-oxidizing environments. They are widely used in the manufacturing sector of the economy.

Similar to other Inconel alloy grades, the base element of alloy Inconel 625 spring steel bars is nickel. UNS N06625 / W.Nr. 2.4856, also known as Nickel Alloy 625 Hot rolled bar is an alloy of nickel and chromium with the addition of molybdenum and niobium.

Inconel 625 bar can withstand high stress and a wide range of temperatures, in and out of water, as well as resist corrosion when exposed to highly acidic environments, making it ideal for marine and nuclear applications.

Inconel 625 round bar has the following properties: Excellent fatigue and thermal fatigue capabilities, high tensile, creep and rupture capabilities Excellent resistance to oxidation, excellent weldability and brazability. Chloride stress degradation destroys tolerance.

Inconel 601 Flat Washers are a family of nickel-chromium-molybdenum alloys for high strength and good corrosion resistance at elevated temperatures. The high alloy content of Inconel 601 Punch Washers enables them to withstand a wide range of severe corrosive environments. Inconel 601 machined washers are commonly used in industrial applications that require very strong components, including power and utility equipment, petrochemical, and oil and gas processing machinery. Inconel 601 round washers are used in high temperature applications to compensate for loosening of threaded connections or to maintain sealing effects, such as pipe connections in chemical or steel mills, heat exchangers, boilers, rolling mills, etc.

Inconel 600 round bar is also known as Alloy 600 or UNS N06600/W.Nr. 2.4816. Chemically, Inconel 600 Din 2.4816 Bar consists of three main alloying elements, namely nickel, chromium and iron, of which nickel is the main component of the alloy.

Inconel 600 es una aleacion de niquel-cromo utilizada en aplicaciones que requieren resistencia a la corrosion y a altas temperaturas. Esta aleacion de niquel esta dise?ada para usarse en temperaturas altas que van desde temperaturas bajas hasta 2000 ¡ãF. No es magnetico, tiene excelentes propiedades mecanicas y exhibe la combinacion ideal de alta resistencia y buena soldabilidad en un amplio rango de temperatura.

Chromium confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions.

Under alternating oxidizing and reducing conditions, alloys may suffer from selective oxidation.

Alloy 600 fasteners are an essential part of modern manufacturing and are used in a wide range of commercial and industrial products, from airliners to garden tools. Inconel 600 is a popular grade containing nickel, chromium and other elements for excellent corrosion resistance. The ductility of this alloy increases as the temperature increases. Our Inconel 600 fasteners are the ideal solution for applications requiring greater temperature stability, excellent mechanical strength and excellent electrical resistance properties. Nickel content provides resistance in several organic and inorganic media.

The inconel 718 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Alloy 625 (UNS N06625) can be used in round bar, flat bar, extruded section, tube, tube, plate, sheet, strip, plate, hexagon, forging, extruded section and wire. View stock listings, sheet stock listings or contact sales for more availability.