ASME B18.2.2 1-2 in-2 1-2in Hex Nuts Inconel 718 2.4668 Nuts Nickel Alloy N07718 Nuts

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 625 round bar is extremely corrosion resistant in a variety of extremely corrosive environments.

Inconel alloy 718 hexagon bolts have good comprehensive performance in the temperature range of -253 ~ 700 ¡æ. The yield strength below 650¡ãC ranks first in the deformed superalloy, and has good fatigue resistance, radiation resistance, oxidation resistance and corrosion resistance, good processing performance, and good welding performance.

INCONEL alloy 625 is designated as UNS N06625, Werkstoff Number 2.4856 and ISO NW6625 and is listed in NACE MR-01- 75.

Typical applications of 625 alloy include thermal shielding hardware, pipes for furnaces, gas turbine engines, combustion liners and spray rods, chemical plant hardware, and special seawater applications.

Inconel 718 can be described as a nickel-chromium alloy containing molybdenum, niobium, iron and very small amounts of titanium and aluminum. Inconel 718 round bars are strong and they also show remarkable yields.

ASTM B564 Inconel 625 Flange Alloy 625,inconel 625 flange,UNS N06625 Flange is a nickel-chromium-molybdenum alloy that is used for its high strength, high toughness and excellent corrosion resistance. The strength of alloy 625,UNS N06625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix. Although the alloy was developed for high temperature strength, its highly alloyed composition also provides a significant level of general corrosion resistance.

The high creep resistance and yield strength of Inconel 625 elbow make this superalloy a good choice for tubes, piping, and plant equipment that require welding.

Because of its versatility, and because it is the standard engineering material for applications which require resistance to corrosion and heat, a number of different critical industries use Nickel Alloy 600 in their applications. It is an superior choice for Nuclear reactor vessels and heat exchanger tubing and Chemical processing equipment. Alloy 600 can be provided in the lower strength, annealed condition, or strengthened through the pilger process.

Inconel 625 bolts have a high density of 8.44 grams per cubic centimeter. The material also has high strength values. The minimum tensile strength of the fastener is 880MPa and its minimum yield strength is 460MPa. Inconel 625 nuts have 50% elongation and good electrical resistivity.

Inconel 600 Flange,Alloy 600 Flange (UNS designation N06600) is a nickel-chromium alloy designed for use in applications from cryogenic to elevated temperatures in the range of 2000 ¡ãF (1093 ¡ãC). Alloy 600 is non-magnetic and readily weldable.

Inconel 601 is an alloy composed of nickel and chromium.

Inconel 625 exhibits high resistance to corrosion and oxidation, high strength and toughness, and excellent fatigue strength. This nonmagnetic, nickel-based alloy also offers an extremely broad working temperature range¡ªfrom cryogenic to 2,000¡ãF (1,093¡ãC).

Inconel 718 is a chromium and nickel based alloy with additional amounts of titanium, niobium, iron, molybdenum and aluminum. This alloy has high mechanical strength and durability to withstand extreme environmental conditions. Inconel 718 round bar has excellent resistance and solderability. These bars have excellent overall corrosion resistance in high temperature and high pressure applications.

INCONEL 625 is a nickel-chromium alloy with an addition of molybdenum and niobium. These additions give the alloy better mechanical properties and better corrosion resistance without having to harden the material.

Inconel 600 bars can be enhanced to possess a smooth and aesthetic finish.Inconel 600 can be easily machined and elongated by 30%

Thus precipitation hardening treatments are not required. This combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high temperature effects such as oxidation and carburization.

Inconel 600 Flanges are made up of a type of nickel chromium alloy. There are different grades of nickel chromium alloys each differ with the chemical compositions.

Inconel 625 Pipe is a nickel chromium super alloy pipe that is made up of 58% nickel, 20% chromium, carbon, manganese, silicon, iron, sulfur, aluminum and titanium in the composition. The pipes are highly corrosion resistant. Navstar Steel is a leading manufacturer and supplier of the Inconel 625 Pipe and tubes. The material has 517MPa minimum yield strength and 930MPa minimum tensile strength.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Alloy 625 is a nickel-chromium alloy with high strength, excellent machinability and excellent corrosion resistance. Operating temperature ranges from cryogenic to 1800¡ãF. The strength of Alloy 625 is derived from the hardening effect of molybdenum and niobium on its nickel-chromium matrix; therefore, precipitation hardening is not required. This combination of elements also provides excellent resistance to a variety of unusually severe corrosive environments as well as high temperature effects such as oxidation and carburization.

The material of the Asme B16.5 Inconel 625 flange is a nickel-chromium alloy. Some of the main reasons why Inconel 625 is highly regarded are its high tensile strength, excellent processability (including joinability), and excellent corrosion resistance.

Nickel alloy pipes are composed of alloys with nickel as the main element. It is widely used for its high temperature strength, corrosion resistance, thermal expansion, special magnetic properties.

Inconel 600 is a nickel-chromium-iron alloy that is the standard material for applications requiring corrosion and heat resistance. Inconel 600 also has excellent mechanical properties and has an ideal combination of high strength and good processability. The high nickel content makes Inconel 600 resistant to corrosion by many organic and inorganic compounds and virtually immune to chloride stress corrosion cracking.

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

Inconel 718 flanges are constructed of nichrome. The material has the characteristics of high density, high temperature resistance, high acid resistance, high strength and high price. There are different types of flanges with different sizes, dimensions and specifications.

INCONEL alloy 718 is ideal for use in these circumstances.Inconel 718 can be easily machined and elongated by 30%.

Alloy 625 (UNS N06625) is a nickel-chromium alloy that is hardened by the addition of molybdenum and niobium, so the alloy does not need to be aged. It has excellent resistance to various corrosive environments and the high temperature effects of oxidation and carburization.

Antioxidant and sustainable in an open environment. The temperature resistance of Inconel 718 flanges is very high, which means that N07718 flanges can withstand the high temperatures of various manufacturing and processing industries.

Inconel 601 has good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in the field above 500 ¡ãC.

Dynamic Forge & Fittings (I) Pvt. Ltd. is an approved manufacturer of class 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 flanges & all part of the comprehensive range of pipe flanges to requirements of BVIS, IBR, BARC, DNV, BHEL & we are ISO 9001:2008, 14001:2004, OHSAS 18001:2007 certified company.

The alloy 601 also has good resistance to aqueous corrosion.