ASME B18.2.2 Hex Nuts Inconel 718 and Incoloy 800 800H 800HT Nuts 2.4668 Nuts Nickel Alloy N07718 Nuts

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

High temperature applications exist due to the thick and stable passivating oxide layer formed when Inconel 718 is heated. ANSI B16.47 Inconel 718 flanges are vital to the food, beverage and food processing and textile industries, primarily to create waterproofing systems during pipeline evaluation.

ASTM B564 601 Raised Face Flange Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition. There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

Inconel ? 600 is a member of the Inconel family of superalloys. A standard engineering material, this versatile nickel-chromium alloy has high corrosion and heat resistance.

The most common reason for Inconel is because it is an alloy that, despite exposure to high temperatures, provides excellent performance when common alloys fail.

Alloy 601 Slip On Flange nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Alloy 718 is a widely used hard Incoloy nickel grade fastener. Chromium and nickel are the basic elements, produced by precipitation hardening, and have excellent strength and corrosion resistance.

Inconel 625 is a non-magnetic nickel-based alloy. Known for its high strength and toughness, high corrosion and oxidation resistance, and excellent fatigue strength, Inconel 625? also offers a very wide operating temperature range, from cryogenics to 2,000¡ãF (1,093¡ãC).

Inconel 625 bolts are primarily used in circulating cooling and heating applications. They can be used in resistance welding applications. Bolts are used in engine casings, honeycomb structures and hydraulic lines. HT PIPE is a leading manufacturer and supplier of Inconel 625 Bolts in different types and sizes. The material is resistant to crevice and pitting corrosion.

Solid solution heat treatment: the alloy is heated to a high temperature single-phase region and maintained at a constant temperature, so that the excess phase is fully dissolved into the solid solution, and then rapidly cooled to obtain a supersaturated solid solution.

Some typical applications for Inconel 625 include chemical processing, aerospace and marine engineering, pollution control equipment and nuclear reactors. This nickel alloy has excellent weldability and is often used to weld AL-6XN. This alloy is resistant to a variety of severe corrosive environments, especially pitting and crevice corrosion.

Inconel 718 is a chromium and nickel based alloy with additional amounts of titanium, niobium, iron, molybdenum and aluminum. This alloy has high mechanical strength and durability to withstand extreme environmental conditions. Inconel 718 round bar has excellent resistance and solderability. These bars have excellent overall corrosion resistance in high temperature and high pressure applications.

Inconel 600 bolts are optimized for the harshest service conditions in manufacturing.

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

Inconel 600 pipe is a chromium-nickel alloy designed for use at temperatures up to 2000 F and down to as low as cryogenic levels. The alloy is resistant to reducing environments as well as chloride stress corrosion cracking due to its nickel content and resistant to weaker oxidizing conditions through its chromium content. Alloy 600 seamless nickel pipe is an austenitic alloy with high nickel content that is non-magnetic and has excellent mechanical properties at both elevated temperatures and cryogenic temperatures. Werkstoff NR 2.4816 Pipes have common applications in gas turbine blades, seals, and combustors, and turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, and so on. We are manufacturer, stockiest and exporter of ASTM B829 Inconel 600 Seamless Pipe and we offer these pipes in custom-made sizes and thicknesses, as per the exact demands of our admired clients.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

It is virtually immune to chlorine ion stress corrosion cracking. Demonstrates adequate resistance to organic acids such as acetic, formic and stearic. Excellent resistance to high purity water used in primary and secondary circuits of pressurized nuclear reactors.

These Inconel 718 fasteners do not lose strength despite exposure to extreme temperature ranges. Alloy 718 bolts are used in cryogenic storage tanks due to their good mechanical and physical properties in extremely cold environments.

Inconel 718 alloy is used in large quantities in extreme environments, such as high-speed airframe components, cryogenic storage components, nuclear reactors, chemical processing, and gas turbine engine components.

Annealing softening begins at approximately 1600¡ãF (871¡ãC) and is fairly complete after 10 to 15 minutes of heating at 1800¡ãF (982¡ãC). Above this temperature, grain growth can be objectionable, although very brief heating at 1900¡ãF will result in complete softening without excessive grain growth. Since the cooling rate has no effect on softening, the material can be water quenched or air cooled.

ASTM B564 UNS N08825, also known as Incoloy 825, is a high nickel alloy that is used in high corrosion and high temperature applications. It has different designations in different countries: ASTM B424 Gr. UNS N08825(US), DIN 17750 Gr. 2.4858, JIS G4902 Gr. NCF 825.

Alloy 625 has excellent fatigue strength and stress corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and is often used to weld AL-6XN. This alloy is resistant to a variety of severe corrosive environments, especially pitting and crevice corrosion.

The alloy is made up of 50-55% nickel+cobalt (with cobalt limited to 1% max) and 17-21% chromium.

Since the Inconel 600 Lap Joint Flange is applied in industries which require frequent dismantling and is considered to be useful for large or hard-to-adjust flanges, they are well suited for use in Nuclear Engineering, airspace as well as a part of Gas turbine components.

Chromium, when added to Alloy 600 Inconel rods along with nickel, increases the alloy’s resistance to sulfur-containing compounds while providing resistance to oxidizing conditions at high temperatures or in the presence of corrosive solutions.

Alloy 600 (UNS N06600) is a nickel-based alloy with excellent carburization and good oxidation resistance at elevated temperatures. This alloy has long been used in the heat treatment industry for the same applications as RA330. Alloy 600 has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Due to the elevated nickel content, alloy 600 is not recommended for use in red hot conditions when sulfur is present.

The versatility of ASTM B166 600 Inconel Rod has led to the alloy being used in a variety of applications, especially those involving a temperature range from cryogenic to above 2000¡ãF.

Stainless Steel Butt Weld Flanges are manufactured from Grade 304 and 316 austenitic stainless steel. However, there are other material types such as carbon steel, duplex steel and high alloy steel that are used to make flanges.

Inconel 718 alloy is a precipitation hardenable nickel-based alloy. It has good ductility in the annealed condition and very high yield, tensile and creep rupture properties at temperatures up to 1300 degrees Fahrenheit.

Inconel 601 ( UNS N06601 ) nickel-based alloy Elastic modulus: 124.7-206.5GPa.

ASTM B564 Nickel Alloy 200 Threaded Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Inconel reductants are unique blends of nickel, molybdenum and chromium content with niobium content. It provides excellent corrosion resistance in chloride-containing environments.