asme b407 incoloy 800 smls pipe

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The chromium and nickel contents of this alloy provide excellent oxidation resistance at low concentrations of oxidizing and reducing sulfur, good resistance to carburization and sulfidation. The alloy also has reasonable resistance to nitriding in cracked ammonia, but not as much as Inconel 600.

Incoloy 800 Bars is another nickel-chromium alloy that is resistant to high temperatures and corrosion.

The Incoloy 800Ht Pipe is a slight modification to the 800H alloys. In these pipes the combined titanium and aluminum levels allow the pipes to work at slightly higher temperatures than the 800h alloys. Both these alloys can be dual certified and are preferred for use in high-temperature setups.

For applications requiring greater resistance to stress rupture and creep, especially at temperatures above 1500¡ãF (816¡ãC), INCOLOY alloys 800H and 800HT are used.

Incoloy 800 is primarily used in applications up to 1100¡ãF, where 800H and 800HT alloys are typically used where creep and rupture resistance is required above 1100¡ãF. The chemical balance allows nickel steel alloys to exhibit excellent resistance to carburizing, oxidizing and nitriding atmospheres.

Alloys 800, 800H and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization at high temperature exposure.

800H is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450¡ãF.

Additionally, the alloy’s properties make it an excellent choice for sea-water applications, including freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength, and resistance to chloride-ion stress-corrosion cracking.

INCONEL 800H/HT – Alloy 800 (UNS N08800/1.4876) is a widely used material for equipment construction requiring corrosion, heat, strength and stability up to 1500¡ãF (816¡ãC) . Incoloy Inconel Alloy 800 has moderate corrosion resistance to many aqueous media and is resistant to stress corrosion cracking due to its nickel content.

INCOLOY 800H is widely used in Power generation, superheater and reheater tubing have also employed the material. Heat treatment retorts, muffles jigs and fixtures have also used this material to great effect.

Incoloy A-286 is an age-hardenable iron-nickel-chromium alloy designed for applications requiring high strength and good corrosion resistance at temperatures up to 700¡ãC (1290¡ãF). Like other specialty materials in the Inconel family, Incoloy A-286 fasteners have excellent corrosion resistance and can be made into a variety of fasteners including hex bolts, washers, nuts and studs.

Monel bolts, such as Monel 400 and K500, are made of nickel-copper alloys and exhibit high strength, toughness and good corrosion resistance over a wide temperature range. A standout feature of Monel bolts is their excellent resistance to hydrofluoric acid, a particularly difficult acid to handle, at all concentrations up to the boiling point. For hydrofluoric acid applications, Monel bolts are probably the most corrosion resistant of all commonly used specialty alloys.

ASTM B564 Nickel Alloy 200 201 Long Weld Neck Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 825 flanges manufactured in accordance with ASME B16.5 are made of annealed material only and are rated for a maximum temperature of 538°C [1000°F]. It is available in a variety of styles including weld neck, slip-on, blind hole, threaded, lap joint, long weld neck and socket weld. Flanges can be forged to ASTM B564 UNS N08825 or made of ASTM B424 Gr. N08825 plate (blind plate and plate flange only), nominal composition 42Ni-21.5Cr-3Mo-2.3Cu.

The Alloy 800H Pipe works well in applications when they are exposed to high temperatures for a prolonged period of time.

ASTM B472 UNS N08020 Flanges Alloy 20 flanges provide good performance in hot sulfuric acid, specifically they offer good resistance to stress-corrosion cracking in boiling sulfuric acid at specific range of 20% to 40% concentration, as well as general sulfuric acid resistance.

Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, while nitrogen increases yield and tensile strength.

Typical applications for the alloy include ethylene pyrolysis, hydrocarbon cracking, cracking furnaces for vinyl chloride, diphenol and acetic acid. The alloy is also used for valves, fittings and other components exposed to corrosive attack from 1100 to 1800 deg F.

Incoloy 800 round bars contain up to 35% nickel, up to 23% chromium and up to 39.5% iron. Incoloy 800 alloy round bars also contain carbon, molybdenum and silicon content. Incoloy 800 threaded rods can be used effectively at temperatures up to 600 degrees Celsius.

Alloy 200 UNS N02200 Weld Neck Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Inconel 825 Flanges?also resist localized attack and avoid pitting and crevice corrosion.

ASTM B425 UNS N08825 bar stock has a nickel content between 38% and 46% and is able to withstand a moderately high temperature range without affecting its tensile strength.

ASME B564 800 Incoloy Reducing Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure.

Applications for ASME SB408 Alloy 825 round bar are chemically machined components, pollution control, vapor recovery, pickling tank components, and nuclear fuel processing. ASME SB408 Alloy 825 bar has excellent resistance to a variety of corrosive environments including oxidation and reduction.

Incoloy 800HT Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Incoloy Alloy 800 / 800H / 800HT Fasteners (Nuts and Bolts) series for extreme corrosion resistance even in sour environments. Due to the high nickel and chromium content, Incoloy 800 hex head bolts resist oxidation and carburization at high temperatures. The chemical balance allows Incoloy 800H square nuts to exhibit excellent resistance to carburizing, oxidizing and nitriding atmospheres.

Incoloy Alloy 800 is widely used in equipment that must have high strength and resistance to oxidation, carburisation and other harmful effects of high temperature exposure.

Incoloy 800H Forgings are components manufactured from chromium nickel alloy with additions of aluminium, titanium and high carbon content.

Incoloy 800H and 800HT are members of the Incoloy 800 family of alloys and have the same chemical composition, but slightly different levels of carbon, titanium and aluminum. We manufacture Incoloy 800/H/HT fasteners with excellent resistance to oxidation, water and reducing environments. Due to their excellent tensile strength and toughness, these fasteners can operate efficiently in high temperature and high pressure environments.