asme sb163 nickel 201 smls pipe

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

La tuberia Carpenter Alloy 20cb3 se puede usar en aplicaciones donde la temperatura esta limitada a 1000 grados Fahrenheit. Ademas, la tuberia UNS N08020 se utiliza en tanques de almacenamiento, tanques de mezcla, bombas y valvulas, agitadores, sujetadores y accesorios.

2.4851 Pipes are known to have a high degree of metallurgical stability. The base nickel content, combined with the substantial chromium content added to Inconel 601 seamless pipe, is not only resistant to many environments containing corrosive media, but also to high temperature environments.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Nickel alloy pipes and tubes have excellent mechanical properties, low gas content, low vapor pressure, magnetic properties, and high thermal and electrical conductivity. These properties and their chemical composition make nickel highly resistant to corrosive environments. Nickel can be used in any environment below 600o F. It is highly resistant to corrosion by neutral and alkaline salt solutions. Nickel also has low corrosion rates in neutral and distilled water. Metal can be hot formed into any shape or cold formed by all methods.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.65

The low carbon content in the 2.4819 alloy C276 tube minimizes carbide precipitation. Carbide precipitation is a phenomenon that occurs during welding of various alloy grades.

Alloy C71500 has good corrosion resistance to clean contaminated seawater and is used extensively on heat exchangers using seawater in power plants, desalination, petrochemical plants, etc

Seamless nickel alloys are available from XS, SCH30 to SCH160. This alloy is very durable and has a long service life. ASTM B161 Nickel Seamless Pipe is available in sizes from 4mm to 219mm. These pipes are manufactured to all standards and requirements.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.52

INCONEL 625 alloy is also used extensively in the aerospace, automobile, oil extraction, oil refining, marine, waste treatment, pulp & paper and power industries. Recent developments have led to INCONEL? 625 alloy being used as weld overlaid or co-extruded product for superheater tubing and is playing a major role in the worldwide growth of Municipal Waste To Energy and biofuel production.

Nickel 200 is a pure commercial (99.6%) resulting nickel with excellent mechanical properties and corrosion resistance, high thermal and electrical conductivity, low gas content and low vapor pressure.

ASTM B619 UNS N10276 Alloy C276 Tube covers 2 classes under this specification. In class 1, the Hastelloy C276 Tube is furnished in an as welded and solution annealed condition or these tubes could be welded along with being sized and solution annealed.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Inconel 718 Welded Pipe is a nickel-chromium-molybdenum alloy designed to resist a variety of severe corrosive environments, pitting and crevice corrosion. Inconel 718 EFW pipe is a nickel-chromium alloy that is precipitation hardenable with high creep rupture strength at elevated temperatures up to approximately 1300 degrees Fahrenheit (700 degrees Celsius). Inconel 718 ERW tube has excellent mechanical properties at high and low temperatures.

This alloy is having chemistry design for achieving thermal stability level that is superior to predecessors like B2 alloy. It is having good resistance to corrosion, pitting and stress corrosion cracking and to knife line as well as the heat affected zone attack.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance, toughness and wear resistance. As a supplier of seamless and welded alloy steel pipes, Federal Steel specializes in the production of “chrome molybdenum” SA335 pipes in grades P5, P9, P11, P22 and P91. Chromium molybdenum power pipes are widely used in power plants around the world.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Alloy 600 Welded Pipe is a basic nickel chromium alloy for corrosive extraordinary heat requests.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Alloy 400 is a solid solution of gold that can only be hardened by cold work.

Nickel Pipe is a metal pipe that is made up of an alloy that has primarily nickel and other elements in its composition. The Seamless Nickel Alloy Pipes are usually cold drawn and has less absolute roughness.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Inconel Alloy 625 is an austenitic nickelchromium-molybdenum-niobium alloy possessing a rare combination of outstanding corrosion resistance coupled with high strength from cryogenic temperatures to 1800¡ãF(982¡ãC).
The strength of Inconel Alloy 625 is derived from the solid-solution hardening of the nickel-chromium

Moreover, the material is less likely to get corroded by both oxidative and reductive acids. Acids such as phosphoric acid, nitric acid, sulfuric acid, and hydrochloric acid have little effect on the ASTM B444 uns n06625 pipe.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Hastelloy X Alloy is a nickel-chromium-iron-molybdenum superalloy with outstanding high temperature strength, oxidation resistance, and fabricability. The oxidation resistance of Alloy X is excellent up to 2200¡ã F.

The Inconel Thick Wall Pipe has been intended for applications in general corrosion resistant and heat resistant applications.The ASME SB725 Inconel Alloy Welded Pipe is envisioned keeping in mind its use in general corrosive service and for mechanical applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Hastelloy C-276 is ideal for use where protection from aggressive corrosion and localized corrosion attack is required. Other important properties of this alloy Nickel Alloy C-276 and Hastelloy C-276 include its resistance to oxidizing agents.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.35

Nickel alloys are some of the most useful materials for making technically superior pipes and tubes for industrial applications. Their inherent properties make them useful for a wide range of purposes. Nickel alloys are particularly resistant to corrosion and can be used in high temperature environments.

Pipes and tubes are among the most-used components manufactured with nickel alloys such as incoloy, and there is a wide range available on the market. For applications that require a high-strength and corrosive-resistant material, INCONEL alloy 718 is worthy of consideration.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Monel 400 has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium.

ASTM B705 Alloy 825 Welded Pipe Radioactive Waste Stream and Nuclear Fuel Reprocessing. Typically, nuclear power plants and radioactive processing plants release high thermal energy.

Nickel alloys are double certified (800H/HT) and also include two forms of properties. Incoloy 800H/HT alloy is designed for high temperature structural applications. The nickel content can make the alloy highly resistant to chloride stress corrosion cracking and embrittlement by sigma phase precipitation. Ordinary corrosion resistance is very useful. Alloys 800H and 800HT have excellent creep and stress rupture properties in the solution annealed condition.