ASME SB564 Alloy 601 weld neck flanges

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 718, UNS N07718, is the most common hardenable Inconel grade. This precipitation hardening nickel-chromium alloy combines excellent corrosion resistance with high strength at elevated temperatures.

ASTM B564 601 Spacer Flange Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

In oxidizing conditions, INCONEL 600 has better corrosion resistance than Alloy 200 and Alloy 201.

Inconel 718 flanges are also ideal for a variety of applications in industry due to their purity and strength. Inconel 718 Socket Weld Flanges are used for hot extrusion dies, pump bodies and parts, etc. Inconel 718 lap flanges account for 50% of the world’s tonnage.

Nickel Alloy 600, also sold under the brand name Inconel 600.

Inconel 718 fasteners have been used in environments from -400o F (-250o C) to 1300o F (700o C). Typical applications include gas turbine parts and cryogenic storage tanks.

During natural gas processing, several common contaminants, such as water, carbon dioxide, and hydrogen sulfide, come into contact with equipment components, including alloy 600 studs. These contaminants are highly corrosive in nature. Therefore, it makes sense to use Din 2.4816 forgings in the equipment. This is because Inconel 600 threaded rods offer several advantages.

INCONEL 625 is used in offshore and aerospace industries, but also in pollution control equipment.

Inconel 718 is a nickel-based precipitation hardening alloy designed for very high yield strength, tensile strength and creep rupture properties at temperatures up to 1300ºF (705ºC). This alloy has excellent solderability.

As an alloy, Inconel 625 consists primarily of nickel, chromium and molybdenum. In addition to these three main metals, trace amounts of niobium are added to the alloy. Alloying any metal will not only enhance its physical properties, but also its mechanical properties. At this point, the addition of molybdenum and niobium to ASTM B446 Inconel 625 forged bar helps strengthen the alloy matrix. The rigid matrix of Alloy 625 bar provides high tensile strength without the use of strengthening heat treatments.

Solid solution heat treatment: the alloy is heated to a high temperature single-phase region and maintained at a constant temperature, so that the excess phase is fully dissolved into the solid solution, and then rapidly cooled to obtain a supersaturated solid solution.

The sizes range from 1/2 inches to 60 inches depending on the type of the flanges.

The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Inconel 625 is a nickel-based super alloy with high strength properties and resistance to corrosion, including H2S and CO2, and elevated temperatures.

The high creep resistance and yield strength of Inconel 625 elbow make this superalloy a good choice for tubes, piping, and plant equipment that require welding.

Nickel Alloy 718 fasteners show good resistance in acidic, alkaline and neutral salt solutions, but severe corrosion occurs in oxidizing salt solutions.

INCONEL alloy 625 is designated as UNS N06625, Werkstoff Number 2.4856 and ISO NW6625 and is listed in NACE MR-01- 75.

Stress-relieving is performed after cold working to reduce residual stress and prevent distortion. Annealing is performed at 1700¡ãF – 1900¡ãF (927¡ãC – 1038¡ãC) to restore full softness.

The Alloy 625 Blind Flanges and other types also have very high melting point of 1350 degrees Celsius. The high melting point allows the flanges to be used in high temperature applications along with the strengths allowing these for high pressure applications as well.

Alloy 600 (UNS N06600) is a nickel-based alloy with excellent carburization and good oxidation resistance at elevated temperatures. This alloy has long been used in the heat treatment industry for the same applications as RA330. Alloy 600 has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Due to the elevated nickel content, alloy 600 is not recommended for use in red hot conditions when sulfur is present.

One of the best features of Inconel 718 flange is that it has good mechanical properties such as high tensile strength and strength. Inconel 718 flanges have very high tensile strength at yield, creep and rupture strength properties.

HT PIPE maintains a large inventory of Inconel 625? flanges, with a variety of sizes, styles, and configurations available to meet your needs. Our Inconel flanges meet the requirements of numerous national and international specifications, including, but not limited to:
N06625
ASTM B564
ASME SB564
WERKSTOFF Nr 2.4856

Alloy 600 is used in chemical and food processing, heat treating, phenol condensers, soap manufacture, vegetable and fatty acid vessels and many more.

Inconel 625 bar is typically part of the types of equipment used in marine applications such as heat exchangers, fasteners and cable jackets.

Inconel 601 Flanges Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

These are presented with pressure numbers Pn6 through PN64. The applications of the 601 Alloy Weld Neck Flangeis in the chemical, power plant, petroleum and petrochemical industrial applications.

The results reveal that Inconel 625 is excellent in resist the corrosion attack in seawater. However, at increasing temperature, the corrosion resistance of this metal decrease.

The ASTM B166 specification is the standard for Alloy 718 ASTM B166 hot rolled bar.

The high nickel content of Inconel 600 (at least 72% nickel) combined with the chromium content provides many benefits to users of Nickel Alloy 600.

Its chromium content makes the alloy resistant to sulfur compounds and various oxidizing environments. The chromium content of this alloy makes it superior to commercially pure nickel under oxidizing conditions. In strong oxidizing solutions such as hot concentrated nitric acid, 600 is less resistant. Alloy 600 is relatively immune to most neutral and alkaline salt solutions and is used in some corrosive environments. The alloy is resistant to steam and mixtures of steam, air and carbon dioxide.

The mechanical properties of Inconel 718 fittings are very interesting, which makes it popular in various industries. For example, ASTM B366 UNS N07718 Inconel 718 fittings have high creep rupture strength at elevated temperatures up to 700 degrees Celsius.