Astm A335 P11 alloy steel pipe

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

For instance, the addition of molybdenum in the alloy steel plate flanges, offers an improved material strength.

ASTM A335 P11 is part of ASTM A335, Pipe shall be suitable for bending, flanging, and similar forming operations, as well as fusion welding. The steel shall meet the requirements of chemical composition, tensile properties and hardness. Each pipe shall be hydrostatically tested. In addition, each pipe shall be inspected in accordance with the practice required for non-destructive testing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

A335 P9 seamless pipe is a type of chrome molybdenum pipe listed in ASTM A335 (ASME S/A335, Chrome-Moly), which has become the standard in the power generation industry and petrochemical industry, not only because of its tensile strength, corrosion resistance resistance and high temperature strength, but also because of its cost-effectiveness. Chromium molybdenum tubes are popular in P grades P5, P9, P11, P22, P91 and P92. The P11, P22 and P91 grades are most commonly used in the powder industry and petrochemical plants, while the P5 and P9 grades are often used in oil refineries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.66

These ASTM A182 alloy steel F12 flanges are corrosion resistant. ASTM A182 alloy steel F12 flanges also have high dimensional accuracy.

The A182 F9 Alloy Steel Blind Flanges are used to close a connection opposed to all other flanges which extend the pipeline. Alloy Steel ASTM A182 F9 Flanges is connected to the pipe by welding the pipe to the neck of the pipe flange. However, the inside diameter of ASTM A182 F9 Alloy Steel Flanges is being designed to match the inner diameter of the pipe.

These pipe fittings of B366 N06601 B366 N08825 B366 N10276 B366 N08020 materials, are used in the chemical industry, as well as in pressure vessels.

Applications for Alloy Steel A335 P5 EFW Tubing can be seen in petrochemical, oil and gas industrial applications, power plants and other high pressure and high temperature services.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P123

A182 alloy steel flanges are not only suitable for high temperature, but also for high pressure or a combination of the two.

A193 B7 threaded rods are also known as hex bolts. It has threads on both ends and it is a relatively long rod.

The low carbon content in A335’s alloy steel P9 square tube reduces carbide precipitation during welding to support corrosion-resistant properties in welded structures. Clad Steel P9 Rectangular Tubes are designed to prevent decomposition-erosion (joint mechanical and material spoilage) where scrubber mixers and gas condensate often contain chlorides.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P142

This is used in fabrication of tubes, boilers and super heaters. On many other applications, this is used and is available in various other sizes and shapes.

Our alloy steel pipes are available in different sizes, grades, gauges and thicknesses according to customer’s custom requirements. We also supply these alloy steel LSAW pipes to our valuable customers at fairly reasonable prices.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19

The wider range of flanges are being offered like ASTM A182 F9 slip flange, F9 alloy welded steel socket flange, alloy steel F9 orifice flange, A182 F9 threaded and screwed flange etc. Imperative for the uniqueness of Alloy Steel F9 Socket Weld Flanges is the allotropy of iron-that is, its existence in two crystalline structures.

Seamless steel tubes in ASTM A333, reheated and controlled at temperatures for hot working and hot finishing operations to finishing temperatures ranging from 845 to 945¡ãC [1550 to 1750¡ãF] and cooled in air or in air. Controlled atmosphere furnaces from initial temperature over 845¡ãC [1550¡ãF]. For ASTM A333 Grades 1, 6, and 10 Seamless Steel Pipe, heat treatment can be performed from a uniform temperature in excess of 815¡ãC [1500¡ãF], then quenched in liquid and reheated to the appropriate tempering temperature, this heat treatment ASTM A333 4.3.1 The above treatment scheme can also be replaced.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.54

Grade B7 is a heat-treated chromium-molybdenum low-alloy steel with minimum tensile strength requirement of 125 ksi (860 Mpa), yield 105 ksi (720 Mpa), and maximum hardness of 35HRC.

Several ANSI/ ASME standards use materials that are forged or cast to produce Cast AS Blind Flanges.

Alloy steel UNS K12822 round bars are widely used in numerous industries for the manufacture of different kinds of components. We provide a full range of alloy steel 15Mo3 round bars which are widely used in engineering, construction and other industries.

The mechanical properties of the astm a182 f9 loose flange include its high tensile strength, good corrosion resistance, increased hardness and toughness properties.

A182-F11 has high thermal strength (¦Äb¡Ý440MPa) and oxidation resistance at high temperature, and has certain resistance to hydrogen corrosion.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Low alloy steels contain trace amounts of alloying agents such as niobium, nitrogen, vanadium, copper, nickel, chromium, titanium, calcium, molybdenum, rare earth elements or zirconium.

Monel 400? also has excellent resistance to stress corrosion cracking in most freshwaters.Our Monel Long Radius Elbow Fittings is available at various angles like 30 degrees, 45 degrees, and 90 degrees.

ASTM A182 alloy steel F12 flanges are corrosion resistant. ASTM A182 alloy steel F12 flanges also have high dimensional accuracy. These ASTM A182 alloy steel F12 flanges also have a rust-proof finish. They are used in numerous industrial applications. These applications include the paper and pulp industry, the oil and gas industry, and more.

ASTM A182 F9 flanges are more versatile. This flange is thinner in size, easy to install in tight working spaces, and more economical compared to various other flanges.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

Alloy steel pipes and tubing are the best choice for stress corrosion cracking (SSC). These also apply to environments where the problem is pitting and crevice corrosion. These tubes and tubes are available within machining allowances and tolerances.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.34

These industries are rely on MSS SP75 WPHY 52 Welded Pipe Fittings and MSS SP75 WPHY Grade 52 Seamless Pipe Fitting because these fittings can withstand severe corrosion problems in harsh conditions.ASTM A860 WPHY 52 are Created High Yield fittings and are by and large utilized at High-pressure prerequisites.

Alloy Steel A182 F12 Flanges has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric, and nitric acids. Alloy Steel F12 Blind Flanges also possesses a great resistance to pitting in chloride solutions, a great resistance to crevice and stress corrosion cracking.

Adding nickel adds toughness to the alloy. Similarly adding chromium to chrome moly flanges aids in enhancing other mechanical properties such as temperature strength, hardness, as well as corrosion resistance.

This is useful for selecting bolts with different strength levels for different high pressure and high temperature applications. ASTM A193 grade b7 hex bolts and other types have a minimum tensile strength of up to 125ksi.