ASTM A106 GR.B 500mm ASME B36.10M Seamless Pipe Tube

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

There are different pressure classes such as class 150, 300 and up to 2500 and PN6 through PN64. The A105 Class 300 Flange and below don¡¯t need heat treatment while the higher pressure classes can undergo heat treatment.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

ASTM Specification A106 covers seamless carbon steel nominal wall pipe for high-temperature service, suitable for bending, flanging and similar forming operations. NPS 1-1/2 and under may be either hot finished or cold drawn. NPS 2 and larger shall be hot finished unless otherwise specified. Surface finish standards are outlined in the specification.

Carbon steel LF3 round bars have the best corrosion resistance to general corrosion. Carbon steel LF3 threaded rods have good ductility and optimum creep properties. Carbon steel LF3 polishing rods have the best corrosion resistance to oxidation corrosion.

Carbon steel ASTM A105 socket weld forged fittings are usually ¡°normalized¡± heat treatment, devoid of any internal stresses and thus having superior performances.

ASTM A105 materials can be heat treated accordingly, such as annealed, normalized or normalized and tempered or quenched and tempered. a105 carbon steel round bars are used for ambient and higher temperature service in pressure systems. Carbon steel A105 round bars have the best corrosion resistance to flowing seawater. Carbon steel A105 threaded rods can be used up to 300 degrees Celsius. Carbon steel A105 hex bar has the best corrosion resistance to general corrosion. Carbon steel A105 square bar has high mechanical strength and mechanical properties.

ASTM A515 Grade 70 carbon steel is used in chemical boiler plants and in the petrochemical industry. It is resistant even to high temperatures in the field of application.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A105 is the most generally utilized carbon steel material grade that used to manufacture forge piping components,

A350 Gr Lf2 grade is widely used in the manufacture of flanges and fittings.

The A350 LF2 Class 1 Flange is the most used with class 2 being used in specific applications. The flanges can also be heat treated for hardening. The heat treatment used by manufacturers on the Carbon Steel A350 Lf2 Flanges includes normalizing, tempering, quenching as well as precipitation heat treatment. A350 LF2 Class 1 and class 2 flanges has chemical and many other mechanical properties such as grade class, tensile strength, yield strength, elongation, hardness etc. This is used for higher temperature and thy ear also used for many other industries.

The carbon steel ASTM A234 WPB pipe fittings offer a wide of industrial application like chemical equipments, boiler and exchanger manufacturing, mining, refineries, utilities, oil refineries and many others.

ASTM A694 carbon steel is the most common grade of carbon steel used for round bar development. The increased carbon content of the alloy reduces ductility by increasing tensile strength. However, the carbon content provides the round bar with the ability to harden during tempering. This is why round steel developed with the existence of alloy carbon steel grades.

ASTM A234 is the standard specification for pipe fittings of wrought carbon steel and alloy steel for moderate and high-temperature service. Carbon steel pipe fittings manufactured to ASMT A234 are usually furnished in butt-welding form in accordance with ASME B16.9 or ASME B16.49. There are two carbon steel grades: WPB and WPC, of which ASTM A234 WPB is mostly often used in pipeline industry. The A234 WPB butt-welding pipe fittings include elbows, bends, returns, tees, reducers, end caps, crosses, lap joint stub ends, nipples and couplings.
After forming at an elevated temperature, fittings are cooled to a temperature below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. Heat treatment temperatures specified are metal (part) temperatures. Heat-treated fittings are to be treated according to paragraph 7 in Specification A960/A960M.

The forging process also consolidates the material to produce an essentially wrought steel structure. The product is subsequently machined to the exact shape and size of finished flange.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

This specification covers standards for forged carbon steel piping components, that is, flanges, fittings, valves, and similar parts, for use in pressure systems at ambient and higher-temperature service conditions.

Flanges, fittings, valves and various other parts ordered to customer dimension or to industry standards such as MSS, ASME and API specification are included in the scope.

Carbon steel is a special type of steel that, as the name suggests, has a higher carbon content than other types of steel. Most types of steel have relatively low carbon content, around 0.05% to 0.3%. In comparison, carbon steel has a carbon content of up to 2.5%. Twenty and a half percent carbon may sound insignificant, but it brings several attractive benefits not found elsewhere.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Weld neck flange(WN flange) attach to the pipe by welding the pipe to the neck of the pipe flange. The allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck flanges.

There are many ways you can manufacture flanges, the most prominent ones being casting and forging.

ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.

Upsetting, forging and other functions in connection with ASTM A105 carbon steel threaded rods can be performed between 982 degrees Celsius and 1149 degrees Celsius.

ASTM A105 flange is a standard carbon steel grade designed with a superior chemical composition.

According to different varieties and requirements of pipe fittings, forging pipe fittings mainly adopts die forging, free forging and cutting forming processes.