ASTM A182 Duplex Stainless Steel Flanges offers a high resistance to general

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

The 2205 gasket is known as a duplex stainless steel gasket because it has a combination of ferrite and austenite and can be made into fasteners due to its high corrosion resistance. It has higher corrosion resistance than 316 stainless steel and is also highly resistant to stress corrosion and chloride cracking. 2205 has been determined to be cost effective because it is only 5% nickel and is significantly less expensive than Hastelloy C276 fasteners.

The raised face allows for the flange to have more bolt holes and connection surface while the welded neck grips the pipe in place. The applications are oil and gas, petroleum, petrochemical and other industrial applications.

Duplex stainless steel (DSS) is featured with structure of two phases (¦Á and ¦Ã) and has characteristics of both ferritic and austenitic stainless steel. It has good corrosion resistance and high strength. It is alloyed with 18%-28% Cr and 3%-10% Ni in the condition of low C. Some steels also contain the alloy elements such as Mo, Cu, Nb, Ti and N, etc.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

2507 nuts are highly resistant to carbide-related intergranular corrosion due to their low carbon content (0.020% in weight).

Duplex 2205 fasteners have high toughness and hardness while also possessing high levels of tensile strength, all as a result of the chromium present in them. However, it can be concluded that dual phase steel fasteners are undeniable; neither deformed nor damaged. This anomaly is much less likely to happen. 2205 Duplex Fasteners consume delicate structures made from ferritic and austenitic stainless steels that are considered part of an alloy, and the end result provides excellent mechanical properties in duplex fasteners.

The mechanical strength, corrosion resistance and low temperature toughness of the ASTM A182 F53 Flanges is higher than that of ordinary duplex stainless steels.

Duplex steel alloys have the properties of austenitic and ferritic stainless steels. This is because they have nearly equal proportions of dual microstructural phases (austenite and ferrite) in the annealed condition.

Astm A479 Super Duplex Steel UNS S32760 Hex Bolts have a high PREN value, the rate of pitting is lower, despite the use of these fasteners in highly corrosive environments such as oil wells and pipelines transporting soured oils, sulfide ores processing, kraft paper production plants, methionine and lysine factories, as well as the photographic industry.

It reaches the phase balance of austenite and ferrite in roughly same volume fraction.

Zeron 100 Threaded Rod are available in hot forged,cold forged and bar stock machined conditions depending upon the order quantity.SA 182 F55 is a forging grade of Alloy 32760 or UNS 32760 which is highly resistant to crevice corrosion and pitting alloy for variety of corrsives. It is 22% chromium duplex stainless steel.

Duplex stainless steel has an array of various benefits such as:
Strength:Duplex stainless steels have approximately double the strength of regular austenitic or ferritic stainless steels.
Toughness and ductility:Duplex stainless steels exceed the toughness and ductility of ferritic grades although they are not as touch as austenitic grades.
Corrosion resistance:As with all stainless steels, corrosion resistance depends mostly on the composition of the stainless steel, with chromium, molybdenum and nitrogen content being the most important. Duplex stainless steels are extremely corrosion resistant and even in chloride and sulphide environments, duplex stainless steels exhibit very high resistance to stress corrosion cracking (SCC). SCC is a type of corrosion that takes place when a particular set of factors are present: Tensile stress, corrosive environment and a sufficiently high temperature.
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

2205 duplex grade without requiring higher levels of nickel or molybdenum. This means that it is a low-cost option than most austenitic stainless steel having the same requirements.

Duplex 2205 bolts are among the most commonly used duplex grades. These are called standard duplex steel fasteners. There are different types of fasteners such as studs, bolts, nuts, screws, etc. Duplex stainless steel fasteners are used in chemical processing, transportation, storage, oil and gas, marine, paper and pulp, wine and many other industries. A wider range of applications is possible due to the combination of corrosion resistance, high temperature capability and high pressure resistance of Duplex Steel 2205 Nuts and Bolts.

Super Duplex Pipe Suppliersis known to have better pressure erosion, splitting obstruction and mechanical properties than some other kind of steel.

Duplex 2205 nuts and nuts are widely used in applications requiring good corrosion resistance and strength in marine and harsh environmenuts.

Super Duplex UNS S32760 is one of the most common super duplex grades on the market. UNS S32760 is a duplex stainless steel designed for use in corrosive chlorine-containing environments, with the addition of W and Cu compared to UNS S32750.

ASTM A479 UNS S32750 / A182 F53 Stud Bolts, which is a threaded rod with two heavy hexagon nuts. In the petroleum and chemical industry, these Super Duplex ASTM A479 UNS S32750 Stud Bolts is the most common bolt used for flanged connections.

Duplex 2205 alloy is composed of high chromium and low or moderate nickel conutenut.

Technically, the microstructure of a duplex 2205 tube is approximately 50% ferrite and 50% austenite. As a result, the properties inherited from both categories make this nitrogen-enhanced duplex 2205 seamless pipe ideal for use in industries such as food processing, oilfield piping and heat exchangers, and flue gas desulfurization.

While Duplex 2205 is the most common duplex product we supply, we can also deliver Duplex 2304 and Duplex 2207 with reduced lead times as these alloys are stocked. Alloy 2205 (UNS S32305/S31803) is a 22% chromium, 3% molybdenum, 5-6% nickel, nitrogen alloyed duplex stainless steel pipe with high general, localized, and stress corrosion resistance properties in addition to high strength and excellent impact toughness.

Duplex 2205 bolts (EN 1.4462) are made from an austenitic-ferritic stainless steel, which was designed to deliver higher strength and corrosion resistance than 300 series stainless steels. It helps users to avoid stress corrosion cracking that is typically seen with 316 and 317. Duplex 2205 bolts combine the qualities of stress corrosion cracking resistance and high strength derived from being a ferritic alloy along with its austenitic fabrication capabilities.

This alloy is especially useful in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some restrictions, especially when used in welded structures.

The duplex microstructure gives this grade high strength UNS S32750 a low coefficient of thermal expansion and higher heat conductivity than austenitic steels and is suitable for working temperatures up to 300¡ãC.

Super Duplex UNS S32760 Reducing Flanges have a strengthened microstructure, a result of added Nitrogen, allowing fabrication of thin and low-weight flanges that are easy on the pocket.

The 2205 was developed to provide excellent machinability. Control of composition and inclusion type improves chip formation and reduces tool wear, resulting in higher machining efficiency and lower tool costs.

Alloy 2205 gets the name Duplex because it is composed of two different types of grains. 40-50% of its grain structure is austenite and 50-60% of it is ferrite. It is closely related to, but much more popular than Alloy 255. In most environments, it surpasses 317L in crevice corrosion resistance. 2205 Duplex excels in chloride environments and resists hydrogen sulfide. 2205 Duplex has almost twice the strength of 316L. Due to the lower nickel and molybdenum content, it is less costly than Alloy C276. Among the places where 2205 Duplex is used include pressure vessels, heat exchangers and scrubbing systems.

The pressure-temperature ratings for ASTM A182 F53 flanges are the same as that for other duplex stainless steels.

Duplex Stainless Steel offers excellent resistance to corrosion along with very high mechanical strength, which allows for lighter fabrication and greater design flexibility. With this high corrosion resistance, Duplex Stainless Steel provides more uptime than Carbon Steel or conventional Stainless Steel.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

This grade, with a tighter specification, is captioned as F60, equating to UNS S32205. Consequently, S32205 can be dual-certified as S31803 but not vice-versa.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.