ASTM A182 Duplex Stainless Steel WN Flanges with high mechanical strength and good weldability

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

S31803 Duplex Steel is a 22% chromium duplex (austenitic/ferritic) steel with moderate to good strength and good general corrosion/stress corrosion/cracking resistance.

The duplex structure provides 2507 with exceptional resistance to pitting and chloride stress corrosion cracking.

Duplex 2205 stainless steel round bars (ASTM A276/ ASTM A479) exhibit good heat resistance up to 300¡ã. SS Rod can be easily welded by most standard methods, the only mandatory requirement is the use of filler metal. Due to its high strength, machinability is low.

Duplex 2507 is a super duplex stainless steel containing 25% chromium, 4% molybdenum and 7% nickel. This alloy is designed for applications requiring excellent strength and corrosion resistance.

Duplex-grade stainless steel alloys have ferritic/austenitic properties, giving these materials superior strength and excellent resistance to oxidation.

The material of the super duplex S32750 sheet has increased tensile strength and yield strength. Super Duplex Steel UNS S32750 plate has good ductility and toughness. AISI S32750 plate has good corrosion resistance compared to Duplex. The material of the super duplex steel S32750 plate has higher corrosion resistance.

DIN 933 technically ranges from M1. 6 to M52, whereas ISO 4017 ranges from M1. 6 to M64. Secondly, that’s it really, the DIN 933 and ISO 4017 standards are the exact same with the exception of M10, M12, M14 and M22.

A ferrous metal is one that contains iron. Therefore, stainless steels are ferrous metals as their main constituent is iron, even in the very highly alloyed grades, such as super duplex stainless steels, or super austenitic stainless steels.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Technically, the microstructure of a duplex 2205 tube is approximately 50% ferrite and 50% austenite. As a result, the properties inherited from both categories make this nitrogen-enhanced duplex 2205 seamless pipe ideal for use in industries such as food processing, oilfield piping and heat exchangers, and flue gas desulfurization.

Duplex 2205 is a nitrogen enhanced duplex stainless steel designed to solve common corrosion problems encounutered with 300 series stainless steels.

The high chromium, molybdenum, and nickel levels provide excellent resistance to pitting, crevice, and general corrosion.

Duplex 2507 (UNS S32750) is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment.

Duplex stainless is a mixed microstructure of austenitic and ferrite (50/50) which has improved strength over ferritic and austenitic steel grades with similar corrosion resistance qualities.

2507 is used for oil and gas industry equipment, offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, and injection and ballast water systems.

2507 has a higher chromium and molybdenum content which gives the super duplex greater corrosion resistance than other standard duplex grades.

UNS S32205 dual-phase steel round bar has excellent resistance to chloride stress corrosion cracking, high strength, can withstand brackish water or salt water impact, and high surface toughness.

The microstructure of ASME SA 479 Duplex Steel UNS S32205 Flat Washers includes a combination of ferritic and austenitic phases. ASTM A479 Duplex Steel UNS S31803 Gaskets have excellent general corrosion resistance in a variety of aggressive chemicals including industrial and seawater acids. Buy duplex stainless steel washers from us at leading market prices.

The pressure-temperature ratings for ASTM A182 F53 flanges are the same as that for other duplex stainless steels.

2507 nuts are highly resistant to carbide-related intergranular corrosion due to their low carbon content (0.020% in weight).

Astm A479 Super Duplex Steel UNS S32760 Hex Bolts have a high PREN value, the rate of pitting is lower, despite the use of these fasteners in highly corrosive environments such as oil wells and pipelines transporting soured oils, sulfide ores processing, kraft paper production plants, methionine and lysine factories, as well as the photographic industry.

Duplex stainless steel, famous for its excellent combination of good mechanical properties and high corrosion resistance, is widely used in the industrial fields, such as the production of seawater heat exchangers and the chemical containers for use in the high-concentration chloride environments.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Debido al peso ligero de la tuberia soldada ASME SA790 de acero duplex UNS S32205, se utiliza en procesos de ingenieria aeroespacial y nuclear. Tambien se utiliza en la industria automotriz y de la construccion debido a su alta resistencia al desgaste y capacidad para trabajar en ambientes de alta tension.

ASTM A182 UNS S32750 Flanges is the most common super duplex grade that has an enhanced pitting and crevice corrosion resistance compared with the ordinary austenitic or duplex types.

Seamless pipe is not as strong as Duplex SS 2205 welded pipe, but is very dimensionally accurate. Dimensional accuracy is useful in highly sensitive applications where measurement and calculation accuracy is required.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.40

The yield strength of this material is almost two times that of the usually used austenitic stainless steel grade.

Duplex alloys have some of the ferritic stress corrosion cracking resistance of common austenitic stainless alloys and many of the superior formability properties that are more cost effective than high nickel alloys.

From corrosion resistance to strength, businesses around the world appreciate these properties of 2507 Super Duplex Seamless. Due to the dual microstructure phase, the weldability of this alloy is classified as good, which is why a relatively robust and durable super duplex welded pipe can be achieved.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

ASTM A240 Type 2205 Duplex Sheet provides a maximum Brinell hardness value of approximately 290 in the annealed condition.

The origin of Duplex steels can be traced back to the 1920s, with the first cast being made in Sweden in 1930. However, the popularity of using duplex only started to rise around 30 years ago when steelmaking technology became more advanced. The two types of metals used to make Duplex ¨C austenitic and ferritic ¨C are both fit for purpose in many types of scenarios but they both have weaknesses that prevent them from being used more widely.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex steel UNS S32205 round bar has excellent corrosion resistance and resistance to localized corrosion such as intergranular corrosion, crevice corrosion and pitting corrosion.