ASTM A182 F5 F9 F11 F12 F22 F91 Flanges A182 F9 Alloy Steel Blind Flanges

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

ASTM A860 MSS SP 75 WPHY 52 Fittings are generally used at High Pressure requirements.Our wide range of Grade WPHY 52 Pipe Fittings includes: WPHY Gr 52 Bend, Elbow WPHY 52 in 45/90 degree, WPHY Grade 52 Tees, Carbon Steel WPHY 52 U Bend, MSS SP75 WPHY Gr 52 Stubends & ASTM A860 WPHY Grade 52 Pipe Nipple.

In order to strengthen chromium alloy flanges, elements such as copper, titanium, vanadium and niobium are added to the alloy.

ASTM A182 F9 Flanges also have higher corrosion resistance levels. Alloy Steel F9 Threaded Flanges can be susceptible to sensitisation, the formation of grain boundary chromium carbides at temperatures between approximately 900 and 1500 Degree F (425 to 815 Degree C) which can result in intergranular corrosion.

This ASTM A182 alloy steel flange has a smaller thickness for easier placement of bolt holes. These ASTM A182 F12 alloy steel pipe flanges are suitable for high temperature and high pressure environments.

The carbon content in the Sa182 F9 flange is lower, so the weldability of this alloy is much better. Generally, higher carbon content in alloys promotes intergranular corrosion, especially during high heat treatments such as welding.

Alloy Steel Flanges are made in different steel alloys. The flanges vary in dimensions and types. There are ? inches through 48 inches of nominal diameter sizes of flanges.

Chromium-Molybdenum alloy steel flanges dimensions has been widely used in the many areas. Their utilization can be seen in areas such as steam power equipment, petrol chemical industry, and high temperature services.

A335 P9 steel pipe material also contains manganese, silicon, carbon and phosphorus in its composition. The addition of these materials makes the material stronger with higher yield and tensile strengths. Due to the high chromium content, the redox effect is high.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.37

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

ASME SA 335 Alloy Steel P91 Pipe also has some other features such as strong construction, dimensional accuracy, rust resistance, etc. We supply these ASTM A335 Alloy Steel P91 Pipes according to customer needs and specifications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.58

These are available in different types such as Slip On Flanges., Blind Flanges, Weld Neck Flanges, Socket Weld Flanges, Orifice Flanges, Spectacle Blind Flanges, Screwed / Threaded Flanges, Reducing Flanges, and Ring Type Joint Flanges (RTJ).

Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

The material is made up of carbon, manganese, phosphorus, sulfur, silicon, chromium and molybdenum in the composition.

These flanges are available in different types such as slip flanges, blind flanges, butt weld flanges, socket weld flanges, orifice flanges, eyeglass blind flanges, threaded/threaded flanges, reducer flanges, ring flanges Type joint flange (RTJ), etc.

Due to its ease of welding, ASTM A335 Grade P91 Welded Pipe can be welded well into piping systems. Pipes have different tolerance classes and test standards depending on the application requirements, grade, schedule and pressure rating of the pipe material.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.28

These are flanges with creep strength and high resistance; therefore, steel threaded flanges help them work in the petrochemical industry.

800H can resist corrosion of many corrosive media. Its high nickel content makes it resistant to stress corrosion cracking in aqueous corrosion conditions. The high chromium content provides better resistance to pitting and crevice corrosion cracking. The alloy has good corrosion resistance to nitric acid and organic acids, but limited corrosion resistance in sulfuric acid and hydrochloric acid. Good corrosion resistance in oxidizing and non-oxidizing salts, in addition to the potential for pitting corrosion in halides. It also has good corrosion resistance in water, steam and mixtures of steam, air and carbon dioxide.

A335 grade P9 alloy steel round pipe is your best choice. It surrounds pipes made of alloy steel. It’s graded very well, making it unique. It has excellent properties such as toughness, durability, weldability, and low electrical conductivity.

Seamless steel tubes in ASTM A333, reheated and controlled at temperatures for hot working and hot finishing operations to finishing temperatures ranging from 845 to 945¡ãC [1550 to 1750¡ãF] and cooled in air or in air. Controlled atmosphere furnaces from initial temperature over 845¡ãC [1550¡ãF]. For ASTM A333 Grades 1, 6, and 10 Seamless Steel Pipe, heat treatment can be performed from a uniform temperature in excess of 815¡ãC [1500¡ãF], then quenched in liquid and reheated to the appropriate tempering temperature, this heat treatment ASTM A333 4.3.1 The above treatment scheme can also be replaced.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.54

The flange connection type usually comes with double units, with a gasket and some bolts & nuts to connect each other. (Firstly pipes are welded on the flanges, then valves and other equipment could be installed on flanges.)

It has chemical composition, such as nickel, nickel-chromium, molybdenum, chromium-molybdenum steels etc.

These Alloy F5 Flange are used for transferring liquid and other fluids to several industries. We are manufactured by a team of nimble-fingered professionals using high quality raw material, modern tools and advance technology.

These ASTM A182 Grade F5 Flanges gives extraordinary erosion resistance in, for instance, caustic and acidic applications which includes sulphuric and higher chloride environments. A182 Gr F5 Threaded Flanges are mostly used in utility services such as air and water. It is similar to the Slip-On flange, but the bore is threaded. Its greatest advantage is that it can be assembled without welding, explaining its use in low pressure services at ordinary atmospheric temperatures, and in highly explosive areas where welding create a hazard.

WPHY 52 Pipe fittings are manufactured as per MSS SP 75 shall be furnished in the heat treated condition.We offer a wide assortment of ASTM A860 WPHY 52 Fittings that cater to the prerequisite of different industries such as engineering, chemical, refineries, machine apparatuses, and numerous others.

The addition of molybdenum strengthens the elastic limit of the A335 p11 welded pipe and increases its temperature strength. In addition to these properties, there is a reduction in brittleness and an improvement in the weldability and hardenability of the pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.48

Alloy steel pipes are used for high temperature and very low temperature service (low temperature) in the energy industry, or for very high pressure applications. ASTM A335 Alloy Steel Pipe is suitable for ASTM A234 WPx Series Butt Weld Fittings (WP5, WP9, WP91) and A182 Fx Forged Fittings and Flanges (A182 F5, F9, F11, F22, F91). All of these materials have similar chemical and mechanical properties and can be joined or welded.

A182 Class F1 Socket Weld Flanges were originally developed for small high pressure pipelines. They have the same static strength as slip-on flanges, but have 50% higher fatigue strength than double-welded slip-on flanges.

The low alloy steel pipe flanges also tend to provide better mechanical properties as opposed to many conventional, standard mild or carbon steels.

Stainless steel is a versatile alloy is considered to be amongst the most widely used metals across the world.Stainless Steel A403 WP304 contains higher chromium and low carbon content.

The material contains carbon, manganese, phosphorus, sulfur, silicon, 8% chromium and molybdenum in a mixture. SA 335 grade P5 alloy steel pipe has similar strength to most austenitic stainless steel grades, with a minimum yield strength of 205MPa and a minimum tensile strength of 415MPa.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P120