ASTM A182 F5 F9 F11 F12 F22 F91 Flanges offers hardenability superior toughness

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Applications for Alloy Steel A335 P5 EFW Tubing can be seen in petrochemical, oil and gas industrial applications, power plants and other high pressure and high temperature services.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P123

Flanges are usually welded or threaded. Flange joints are made by bolting two flanges together with a gasket between them to provide a seal.

Nickel alloy 20 is a low-carbon, niobium-stabilized austenitic nickel/iron/chromium alloy with additions of molybdenum and copper. ASTM B366 specification covers Inconel, Monel, Hastelloy and Nickel Alloy Pipe Fittings used in acidic and sea water.

Our products are a symbol of constant innovation and superior quality.

The flange connection type usually comes with double units, with a gasket and some bolts & nuts to connect each other. (Firstly pipes are welded on the flanges, then valves and other equipment could be installed on flanges.)

Low alloy steel ASTM A182 F11 flanges typically have a total alloy content of 1.5% – 5%. Its common alloying elements are manganese, chromium, silicon, nickel, molybdenum and vanadium. It may contain up to four or five different quantities of these alloys. At the same time, the increased strength of the alloy steel F11 flange may require higher forming pressures. Annealing of SA 182 Gr F11 steel flanges is accomplished by water quenching by thorough immersion at 1725¡ãF – 1850¡ãF (941¡ãC – 1010¡ãC) and can only be hardened by cold work.

Alloy Steel F5 Flanges are square-shaped and are instrumental in interfacing pipes of nominal bore size without welding and are reasonable for high pressure hydraulic frameworks. ASTM A182 F5 Lap Joint Flanges go by a range of names, including back up flange, loose hubbed flange, loose ring flange and van stone flange. ASTM A182 Gr F5 Blind Flanges are commonly used in petrochemical, pipe engineering, public services and water works.

The mechanical properties of the astm a182 f9 loose flange include its high tensile strength, good corrosion resistance, increased hardness and toughness properties.

B7 threaded studs and short head bolts are readily available in the market. B7 grade bolts are often used for pipe flange connections. These bolts are usually sold in a normal bare metal finish, but are usually hot-dip galvanized, galvanized, Xylan coated, PTFE coated, or otherwise treated with a corrosion resistant coating.

A335 has improved wear resistance at higher temperatures. It has good formability and machinability without deformation and deformation. It has good thermal stability in pressurized environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.35

Our Alloy Steel Flanges are widely used in various industrial applications.

Hot rolled 4140 steel also has good fatigue resistance and impact resistance after heat treatment.

Our ASTM A320 Grade L7M Alloy Steel Bolts are suitable for meeting commercial and industrial needs such as grills, infrastructure, grills and construction.

A335 P22 is a seamless tube made of ferritic alloy stainless steel. Chemically, the alloy of SA335 P22 material contains trace amounts of carbon, manganese, sulfur, silicon and phosphorus. The main additives in the alloy are molybdenum and chromium, which give stainless steel excellent mechanical properties. Tensile strength, corrosion resistance, hardness and other properties are enhanced and improved. Molybdenum reduces the brittleness caused by the addition of chromium.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P132

The A335 Chromium (or Chromium) is the basic component of stainless steel. Any steel with 12% or more chromium is considered stainless steel. Chromium is almost irreplaceable in terms of resistance to oxidation at high temperatures. Chromium increases tensile, yield and hardness at room temperature.

825 is an austenitic Ni – Fe – Cr – Mo – Cu nickel based alloy developed to resist corrosion in very aggressive media.Alloy 825, also known as Incoloy 825, is a nickel-iron-chromium alloy with molybdenum and copper added.

Alloy C276 (UNS designation N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy
known for its corrosion resistance in a wide range of aggressive media.

Our Alloy Steel Seamless Pipes (IBR) are made of alloy steel with excellent properties. These were developed for energy-related applications involving oil and gas drilling and are therefore subject to the stress of machine parts. In addition, alloy steel pipes are used in domestic, professional or industrial fields.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P116

Products made from alloy steel perform far better than those made from carbon steel. Although they are less expensive than stainless steel grades, they are less resistant to corrosion than stainless steel but more resistant than carbon steel pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.67

It is available in materials of ASTM A 182, and ASTM A 105. The flanges are available in various grades like ASME B16 47 ¡®A¡¯ Series, and ¡®B¡¯ Series to suit the needs of the clients and the industry.

ASTM A182 refers to low-alloy steel forgings. It belongs to carbon steel.

The Chromoly based F12 material specification are ideal for applications, where the piping systems are to transport or carrying corrosive fluids or gases at high-temperatures. Alloy Steel F12 Flanges they are used in various applications. Applications include chemical equipment, pharmaceuticals, gas processing plants, power generation tools, petrochemical industry, pulp and paper industry, on shore and offshore marine equipment, oil rigs, oil refineries, under water equipment, water desalination plants, condensers, heat exchangers and others.

The ASTM A/ASME SA 335 specification covers seamless ferritic alloy steel pipes for high temperature service. The pipe is mainly used for bending, vanstoning and similar forming operations, as well as for fusion welding.

Grade 1 alloy steel plate has very high corrosion resistance, but it is increasingly expensive. Our alloy steel products are known worldwide for their reliability and quality.

The ASTM A333 specification covers carbon steel pipes for low temperature applications. LTCS or Low Temperature Carbon Steel is an alloy covered under this specific specification. A333 carbon steel cryogenic tubing specified by ASTM has moderate tensile properties and good hardness, but low corrosion resistance. The corrosion resistance of the alloy can be improved by using certain surface treatments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

ASTM A193 Grade B8M Grade 1 Fasteners are similar to Grade B8 but are made of AISI 316 stainless steel instead of AISI 304 stainless steel. Type 316 stainless steel has better corrosion resistance than type 304 stainless steel due to the addition of molybdenum.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

The alloy has great mechanical properties at subzero temperatures.For catering to the needs of our customers better, it is essential that we manufacture Monel Pipe Fittings in different types, with each one serving some specific purpose.

We offer alloy steel grade 2H washers in various specifications and ranges according to the precise needs and selection of our customers. Alloy Steel Grade 2H Star Washers can be produced in standard sizes or custom made to your specific requirements. Customers can take advantage of what we offer alloy steel grade 2H spring washers at market leading prices.

At elevated temperatures, conventional steels, unlike ASTM A 335 P91 pipes, begin to lose their microstructural form, leading to failure. A burst or crack in the pipe is a visible fault. But since SA 335 P91 chrome-plated welded pipe is well suited to sustain itself at high temperatures, failure rates are extremely low.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20