astm a815 asme sa815 duplex steel elbow

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The mixture of austenitic chromium-nickel-iron with a small amount of molybdenum makes Alloy 20 known as a “superalloy,” which provides resistance to acid attack under a variety of conditions. We are a manufacturer of ANSI B16.9 Alloy UNS N08020 Equal Tee with good machinability.

We are a company with 50 years of experience in stainless steel investment casting accessories. Our stainless steel investment casting accessories and other products are manufactured from high-quality materials and undergo rigorous quality checks at all stages of production to ensure quality.

200 is 99.6% pure nickel, one of the toughest metals. HT PIPE is a leading supplier and exporter of Nickel 200 butt welded and forged fittings. We supply Nickel Alloy 200 butt welded and forged fittings to all customers worldwide according to customer requirements.

Stainless Steel Pipe Bends are widely used in high-temperature applications.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

MONEL K500 is non-magnetic. MONEL K500 should be annealed when welded and the weldment then stress relieved before aging.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

It is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel.

This means titanium can be used as a replacement for steel¡ªa major benefit, as it is 45% lighter than steel. It is twice as strong as aluminum and 60% denser.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

UNS S31603 Elbow also has excellent resistance to pitting corrosion and soaring tensile strength. They are machined to have tough and strong chip characteristics. SS 316L 45 Degree Elbow is also considered to be more resistant to general corrosion and pitting than normal Nichrome.

Grade UNS S31803 is termed as a duplex class due to its mixed Austenitic-ferritic microstructure. Duplex stainless steel alloys have an equal proportion of both austenite and ferrite, which is why Duplex Steel Fittings exhibit properties prominent to both classes.

The deformation activation energy is low during superplastic deformation, and the process may be controlled by diffusion.

It is applicable in various applications like car headers, machinery parts, screws and also food handling equipment. Hot / Cold / Fabricate / Seamless / Welded / Induction

The greater content of alloying elements like chromium, molybdenum, and nitrogen in SD UNS S32750 tee helps material in withholding crevice corrosion and pitting. SD UNS S32750 cross is combining greater mechanical strength and with good ductility with resistance to corrosion in a different atmosphere.

Pure titanium is almost 99.2% pure and is a lustrous metal with low density and high corrosion resistance.

These fittings are produced from the highest quality raw materials and are well tested and inspected according to national and international standards. Manufacturers offer a full range of pipes and fittings such as UNS S32205 45 degrees. Elbow, Duplex UNS S31803 Reducer, Duplex S31803 Cap, Duplex S31803 Butt Weld Fitting, 2205 Duplex 90 Degree Elbow, Duplex S32205 Butt Weld Fitting, Duplex S32205 Fitting.

Incoloy 800H is a solution heat treated, carbon controlled version of its parent Alloy 800.

Sanitary elbows are also classified by length. A large radius elbow has a curvature radius of 1.5 times the pipe¡¯s diameter, but a short radius elbow has a radius equal to the pipe¡¯s diameter

In this standard it covers the specification of elbows, tees, reducers, caps and cross, it usually adopt butt welding ends.

HT PIPE is highly acclaimed manufacturer of the complete range of Stainless steel 304/ 304L pipe fittings such as SS 304 reducer, SS 304 elbow, SS 304 tee, SS 304 cross, SS 304 stub ends and SS 304 pipe bends.

As most bent pipes do not alter the ends of the piping, pipe bends are often easy to implement within a processing system using standard welding processes, flanges, or other connection methods.

Available in both 304 and 316L stainless steel alloys. This product is manufactured in accordance with 3A Standards for use in sanitary line processing including food, beverage, and pharmaceutical industries.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Alloy 20 was originally developed for use in sulfuric acid service found in facilities such as pulp and paper mills. With good general corrosion properties, Alloy 20 usage has expanded in chemical, petrochemical and power generation plants.

348 Stainless Steel is a high moly austenitic grade alloy available in form of Pipe, Tubing, Pipe Fittings, Flanges, Valves, Fasteners, Round Bar & Plates.