ASTM A234 WP11 180deg elbow

Stainless Steel Pipe Fittings are used in the water pipeline, natural gas, fabrication, and nuclear power plant industry.

316 pipe bend contains a minimum 2.0% molybdenum which makes it much more corrosion resistant than 304 however, as it is a more expensive element, generally makes 316 a more expensive grade of metal.

HASTELLOY C-276 alloy is available in the form of plates, sheets, strips, billets, bars,
wires, pipes, tubes, and covered electrodes.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

254 SMO is a high-alloy austenitic stainless steel developed for use in seawater and other corrosive chlorine-containing media. The steel has the following characteristics: excellent resistance to pitting and crevice corrosion, high resistance to general corrosion, high resistance to stress corrosion cracking, higher strength than conventional austenitic stainless steels, and good weldability.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

Incoloy 800 or also referred to as UNS N08800, nickel 800 has excellent resistance properties to chemicals as well. Renowned for its high tensile strength at elevated temperatures, Alloy 800 also resists oxidation, carburization as well as other types of high-temperature corrosion.

Sanitary elbows are also classified by length. A large radius elbow has a curvature radius of 1.5 times the pipe¡¯s diameter, but a short radius elbow has a radius equal to the pipe¡¯s diameter

Duplex steel butt welded pipe fittings are a stainless steel alloy with a dual microstructure, which is the reason for their exceptional mechanical strength and excellent corrosion resistance. Fittings manufactured to ASTM A815 specifications are manufactured with seamless construction or welding. While A815 S31803 is a specification that allows for different forging or forming operations; it also covers these fittings, for example duplex steel fittings can be produced by manufacturers using a combination of two or more processes.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

These fittings material consist of killed steel, forgings, bars, plates, seamless or HFW (fusion welded) pipe products, with filler metal added.

Alloy 800 elbows are widely used in various industries and are mainly known for their excellent mechanical properties. Werkstoff Nr. The 1.4876 end cap has low gas content, low vapor pressure and high thermal conductivity.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Butt weld elbows in the Incoloy 825 series are one of the strongest and most versatile elbows types. These fittings can be easily attached to pipe because they have beveled ends that meet ASME B16.25. These elbows allow the module to create full penetration welds without any additional penetration or preparation. The fittings are welded according to the butt welding procedure, placing them on the assembly and welding in place. Welded connections in this range provide a strong and high-strength connection. These fittings are available in larger and stronger sizes compared to other grades of fittings.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Versatility and ingenuity, our UNS S31008 SS 310S fittings are easy to install and remove for oxidation and low temperature use in the textile, metal and wood cutting and CNC milling industries. Essential to operations in the food, beverage, pharmaceutical and dairy industries, our DIN 1.4845 elbows offer good machinability and processability.

We have been a leading manufacturer and supplier of Duplex 2205 Fittings for the past ten years. Our goal is to produce the best product for everyone at the most reasonable price.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

We manufacture premium duplex 31803/32205 fittings with many key properties such as high resistance to corrosion fatigue, stress corrosion cracking, especially chloride stress corrosion cracking, erosion, excellent workability and weldability.

The structure of 2205 duplex stainless steel consists of a pool of austenite surrounded by durable ferrite phases. In the toughened state, 2205 contains approximately 40-half ferrite. Duplex steels derive identical austenitic and ferritic fractions of a mixed microstructure. Ferritic alloys offer strength against stress cracking, while austenitic alloys offer ease of manufacture and rust resistance. These tubular fittings work under acid reducing and oxidizing conditions and in building materials in gas desulfurization plants.

The amount of other elements that may be present in stainless steel is immeasurable compared to carbon steel. The most notable feature of stainless steel is that it is not easy to corrode or rust. Avoiding corrosion is a unique property of steel, as most mild steels are primarily made of iron, which rusts quickly when exposed to conventional oxygen-containing atmospheres.

The main characteristics of stainless steel 316/316L pipe fittings, SS 316/316L flanges are high oxidation resistance, better corrosion resistance than type 304 stainless steel, excellent pitting resistance Chemicals are very resistant.

The sheer variety of pipe bend sizes and materials also make them suitable for routing everything from hot or caustic liquids to maintaining pressure and movement in high viscosity liquids or those with suspended solids, such as Oil Sands slurry lines which contains a high concentration of silica sand.

When choosing pipe fittings, material is always a big part of the choice. Stainless steel offers excellent protection against corrosion and rust, something which could prove hugely troublesome within water and gas pipes. Brass and copper pipes wouldn’t have the same resistance to these kinds of issues.

ASTM A403 WP321 is one of the most common stainless steel pipe fittings material.(ASTM A403 WP321 Standard Specification)