ASTM A234 WP5 pipe fittings elbows

A stainless steel butt weld cap is a type of pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.
A Stainless Steel Butt Weld Cap is used to seal the end of a pipe or a particular butt weld fitting branch or orifice. Typically butt weld pipe caps are used at the end of a piping system or if maintenance is required the pipe cap can blind or isolate the rest of the system to keep it running while maintenance or repairs are performed.

What makes this material a cost-effective alternative is that the nickel content that manufacturers use to produce dual-phase steel butt-welded pipe fittings is lower than that of super-duplex steel. While the reduction in nickel content gives the metal lower mechanical properties, the higher molybdenum and chromium content almost makes up for the lack of nickel in duplex stainless steel fittings.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

It is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

While 300 series stainless steels are very popular, they are not universally suitable for all process piping applications. For example, even though they are corrosion resistant, 300 series formulations do not perform well in the presence of chlorides. In these cases, steels with much higher alloy contents such as molybdenum, chromium and nickel are preferred.

Usually the ASTM A234 WP9 elbows,tees,reducers are made from steel pipes,the caps are made from plates.But the large sizes pipe fittings are commonly manufactured in pieces and welded together.In hot or concentrated solutions, rates of these Alloy Steel WP9 Cross Butt Weld Fittings are typically too high for sensible service life.

Inconel 600 fittings are made from a nickel-chromium alloy that contains a minimum of 72% nickel and 14% chromium in a composition with carbon, manganese, silicon, sulfur, copper and iron.

Duplex 2205 is a duplex ferritic austenitic stainless steel containing approximately 22% chromium, 3% molybdenum and (5 to 6)% nickel. Duplex steel butt welded pipe fittings are also available in various forms, such as 45 degree, 90 degree long and short radius elbows, equal and unequal diameter tees, concentric and eccentric reducers, end caps, short pipe ends, and more.

Hastelloy C-22 (UNS N06022) pipe bends and fittings in stock, allowing for a quick turnaround. Hastelloy C-22 has excellent resistance to aggressive oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions.

Strong and Oxidation Resistant to 2200 Deg. F (1200 Deg. C) – HASTELLOY X pipe bend is a solid solution strengthened grade has good strength and oxidation resistance up to 2200 Deg. F (1200 Deg. C).

To prevent sensitization and the resulting intergranular corrosion, it carries niobium. It has advanced SCC resistance in boiling 20% to 40% sulfuric acid. Neither pre-weld nor post-weld thermal remedies are required in WNR 1.4306 Pipe Fittings. It is manufactured without difficulty by means of traditional commercial craftsmanship.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

SS 316 elbows are used to change the direction of pipes. They are available in different shapes, sizes and dimensions. The carbon content of these pipes is lower than 301 and 304 grades. Therefore, 316 stainless steel welded pipe fittings are said to be a suitable choice for welding.

ASME SA 403 WP 304 Reducer is a butt welded fitting that reduces pipe diameter at the joint. Stainless steel 304 long radius elbows are another type of elbows with a radius more than twice the diameter of the pipe.

Our WNR 1.4462 Duplex Steel S31803 Pipe Fittings withstand sulphur-induced stress corrosion cracking, accommodate high steam pressures and provide extended service life, economical and reliable.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

In addition to having an excellent record for recyclability and end-of-life recovery, our stainless steel 316 elbows meet another important criterion for sustainable materials. These Stainless Steel 316 Tee Fittings can often meet the life cycle needs of a project if the proper stainless steel is selected to match the corrosive conditions of the environment.

The 800H modification was to control carbon (0.05 to 0.10%) and grain size to (>ASTM 5) to optimize stress rupture properties.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.
A stainless steel pipe system is the product of choice for carrying corrosive or sanitary fluids, slurries and gases, particularly where high pressures, high temperatures or corrosive environments are involved. As a result of the aesthetic properties of stainless steel, pipe is often use in architectural applications.

Alloy 20 Industrial Fitting, Werkstoff No 2.4660 Alloy Butt Weld Tee, ANSI B16.28 Alloy 20 Cross, MSS SP-43/SP-79 Alloy 20 Stub End
ASME SB366M Alloy 20 Pipe Cap, ASME/ANSI B16.9 Alloy 20 Reducer, Alloy 20 ASTM B366 Welded Fitting, China B366 Alloy 20 Seamless Fitting Price

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

These ASTM A234 WP9 Buttweld Fittings is use in various industries like : Alloy Steel WP9 Buttweld Pipe Fitting uses in Oil and Gas Pipeline.A234 WP9 Contains 0.15% – carbon, 0.3 to 0.6% – Manganese, 8 – 10% Cromium, 0.3% max phosphorus and sulfur.

The Stainless Steel 304 Pipe Fittings are also strong. They have 205MPa minimum yield strength and 515MPa minimum tensile strength.

Copper-nickel is known for its broad resistance to seawater. Due to the high absorption rate of the alloy, copper-nickel (Cu-Ni) 70/30, (Cu-Ni) 90/10 pipe fittings are widely used as connectors for piping systems in the power generation and shipbuilding industries.

The cast stainless steel pipe fittings such as 304 or 3016l are available in several different types for use in different applications such as threaded, flared, without flare and flange adapters. They provide a safe and leak-proof seal for refineries, chemical processing units, power supply units, and different processing lines. They are suitable for high-pressure applications as well as high temperatures, for instance, nuclear industry and petrochemical, etc.

Duplex Steel UNS S31803 / S32205 Butt Welded Pipe Fittings, we make sure to provide you with a product that meets the required quality standards and has a longer service life. Our ASTM A815 Duplex Steel S31803/S32205 Elbows limit localized corrosion types and are essential for applications requiring a compact yet flexible seal.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

The alloy matrix is strengthened by the interaction of niobium with molybdenum that offers high strength without the need for precipitation-hardening treatment.

ASTM A403 WP316 fittings are available in different sizes and shapes in pressure ratings 3000#, 6000# and 9000#. Stub end fittings are often used to close one end of a pipe.