ASTM A234 WPB Carbon Steel Pipe Fittings Elbows

The corrosion resistance of this alloy alone makes duplex stainless steel pipe fittings a better contender for challenging applications. Industries such as oil and gas and petrochemicals are high pressure environments. These industries need products like ASTM A815 UNS S31803 elbows that are not only standardized but also durable.

We sincerely look forward to providing you with the best quality and most affordable Heat-Resistant Stainless Steel Strips, 321 Stainless Steel Coils, 301 Stainless Steel Coil and bringing the best and fastest economic benefits to your business. Our company is committed to innovation, because we know that only unremitting innovation, the brand can be sustainable development. We may stick on supplying original and good quality parts even a little profit earned. In terms of business innovation, our company shapes the corporate image, implements the brand strategy, establishes the modern corporate culture, and reasonably arranges the network.

It exhibits excellent corrosion resistance due to its high chromium, molybdenum and nitrogen content. They are highly resistant to pitting and crevice corrosion even in oxidizing and acidic solutions. Duplex 2205 butt welded pipe fittings are resistant to chloride stress corrosion cracking at temperatures of approximately 150 degrees Celsius. Due to the presence of ferrite in duplex UNS S31803 fittings, they exhibit good performance in corrosive environments and provide good weldability.

Stainless steel pipe fittings consist of 10% nickel and high chromium content. Manufacturers of stainless steel fittings produce these fittings with the addition of manganese, phosphorus, carbon, silicon and sulfur in addition to the two main elements.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

316 and 316L are austenitic alloys, which means that these stainless steel products achieve corrosion resistance through the use of iron carbide or a non-magnetic solid solution of carbon in iron during the manufacturing process. Compared to chromium-nickel austenitic stainless steels, 316L stainless steel has higher creep, rupture stress and tensile strength at elevated temperatures.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

800H is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450¡ãF.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless steel 304 elbows are made of high grade stainless steel to help withstand fluid pressures at moderate and high temperatures. We are one of the top manufacturers of ASTM A403 WP 304 Stainless Steel Long Radius Elbows, covering the standard for forged austenitic stainless steel fittings for a variety of pressure applications.

These alloys can function at very high temperatures and in severe mechanical stress environments, and also where high surface stability is required. They have high creep and oxidation resistance.

Monel 400 provide superior quality for different types of mechanical, and general engineering applications.

The surfaces of these parts have a mottled appearance due to general corrosion. Additionally, they weaken the alloy and require frequent replacement to prevent catastrophic effects. Because the alloy has good resistance to general corrosion or uniform erosion, from a financial standpoint, the industry can use 304 stainless steel welded fittings without denting their pockets.

Our high quality standard grade 150 lb 304 316 stainless steel threaded fittings are manufactured to the highest standards. All stainless steel pipe fittings are monitored by quality control personnel for strict adherence to applicable standards and codes. These stainless steel fittings are ideal for applications involving potentially corrosive chemicals or liquids. In addition to being resistant to corrosion, stainless steel pipe fittings also prevent contamination, making them useful for many professionals.

The manufacturing process of pipe fittings includes forging and forming operations. As well as pressing, hammering, piercing, extrusion, upsetting, rolling, bending, fusion welding and machining. Or a combination of two or more of these operations.

Stainless Steel Pipe Fittings are used in the water pipeline, natural gas, fabrication, and nuclear power plant industry.

INCOLOY alloy 926 (UNS N08926 / W. Nr. 1.4529 / INCOLOY alloy 25-6MO) pipe fitting is a super-austenitic stainless steel containing 6% molybdenum and enhanced by an addition of nitrogen. The nickel and chromium contents of this alloy make it resistant to a wide range of corrosive environments.

Manufactured from 304/304L or 316/316L stainless steel with milled inside and outside diameters (ID/OD). These stainless steel welded joints meet ASTM A403, ASTM A960, MSS SP-4, ASTM B16.9 (except for walls), and MSS SP-43.

ASTM A403 WP304H has a high carbon content in chemical compositions.ASTM A403 WP304H normally is used for the pressure piping systems of moderate and high temperature services. WP304H is a kind of heat and corrosion resistant steel.It has a good pipe bending,welding performance,heat and corrosion resistance,high rupture strength and stability,also the cold deformation ability is very good.It could be used up to 650¡ãC,oxidation temperature up to 850¡ãC.

Pipe bending methods will vary based upon the metals used.

More than a hundred years of development have allowed nickel alloys to have a wide range of applications and strengths, and have produced many forms. We offer Inconel, Monel and Incolloy alloys for everyday use and high stress industrial, energy or chemical environments.

The source raw material for ASTM A234 WPB steel pipe fittings may come from steel pipes such as ASTM A106 Gr.B and C. Also from steel plates like ASTM A285 Gr.C, ASTM A516 Gr 70, ASTM A572 etc.

The schedules of the fittings range from 5s to XXS.Fittings over NPS12, produced by locally heating a portion of the fitting stock to any temperature for forming, shall be annealed, normalized, or normalized and tempered. And these fittings inlcudes elbow, tee, reducers, the carbon content shall les than 0.26%. NPS12 under no need to be heat treated under this forming process.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

S32205 is a duplex stainless steel with twice the strength of austenitic stainless steel. Duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength, good impact toughness and good overall and local stress corrosion resistance. The yield strength of duplex stainless steels is twice that of austenitic stainless steels, a feature that allows designers to reduce weight when designing products, making this alloy more affordable than 316, 317L. This alloy is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some limitations, especially when applied to welded structures. Duplex stainless steel has twice the compressive strength compared to austenitic stainless steel, and designers can reduce its weight compared to 316L and 317L. Alloy 2205 is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range, and can also be used at lower temperatures under severe restrictions (especially for welded structures).

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Unlike the bends, the elbows can reduce the pressure applied on the walls when turning the fluid flow direction.Fittings made from WPHY 52 material are known to have a long work life, durable, tough and hard. The WPHY 52 properties make these fittings a perfect cost saving solution for a variety of industries.

ASTM A234 covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97.

We are manufacturers of Stainless Steel 304 Butt Weld Fittings that are produced in a variety of designs, style, specifications, grades and sizes, with each fitting serving an industry’s need.

In general, the Type 316 grade can be considered equally good in a given environment. A notable exception is intergranular corrosion in the heat-affected zone on welds and susceptible alloys in sufficiently corrosive environments. In such media, Type 316L is more suitable for welding conditions than Type 316 because the low carbon content increases resistance to intergranular corrosion.