ASTM A234 WPB Pipe Fittings Carbon Steel Deg bend Application Industries

We supply a wide range of precisely engineered ASTM A 105 Carbon Steel Weld Neck Flanges made in compliance with international quality and safety standards.

A234 Pipe Elbow the radius of curvature is 1.5 times the diameter (R=1.5D). We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

ASTM A105 steel grade is a typical common material (mild carbon steel) for forged carbon steel flange, it used in a lot of places for ambient and higher-temperature service in pressure systems.

Carbon Steel A105 Slip On Flanges are meant for non-critical conditions, as they have a low Carbon content. However, our Carbon Steel A105N SWRF Flanges are ‘normalised’ flanges for a better work performance.

The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.Common use material are ASTM A234 Grade WPB, WPC, WP5, WP9, WP11, WP22 and WP91. It covers the butt-welded pipe fittings of Elbow, Tee, Reducer, Cap and Cross, and some socket welding, threaded pipe fittings.

U-Bolts are easy to machine and can meet the tight tolerances required for thread and fastener configurations. Carbon steel is also an economical metal. Carbon steels are classified by the amount of carbon in the alloy, which affects the properties of the steel. Mild steel with a carbon content of 0.05-0.3% is ductile and ductile. Low tensile strength and hardenable by carbonization. It is the lowest cost of carbon steel alloys.

Some of its applications are power generation, pulp and paper industry, power offshore oil drilling industry, specialty chemicals and pharmaceuticals. Other applications where it is found to be used are condensers, gas handling, chemical equipment, seawater equipment, pharmaceutical equipment and heat exchangers.

Carbon Steel Flanges are manufactured either by forging or by casting.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Upsetting, forging and other functions in connection with ASTM A105 carbon steel threaded rods can be performed between 982 degrees Celsius and 1149 degrees Celsius.

Carbon steel forged fittings and flanges are prevalent and common used in industries, the representative material grade is ASTM A105 and A350 LF2/LF3.

ASTM A234 WP11 pipe fittings mean the pipe fittings which material are ASTM A234 WP11,they are used for the pressure piping systems of moderate and high temperature services.We are a manufacturer, trader, stockist, supplier and exporter of A234 WPL11 Pipe Fittings which abide by the specifications of ASTM A234, which include wrought Carbon steel as well as Alloy Steel fittings, of seamless and welded construction.

The material has good strength with 240MPa minimum yield strength and 585MPa minimum tensile strength.

Regardless of the heat treatment applied to the carbon steel alloy, the higher carbon content in the material reduces the weldability of carbon steel fasteners, while also effectively reducing the melting point of the bolt. Most carbon steel studs are generally softer.

A234 WPB SCH 80 Elbow is a standardization that conforms to schedule 80. ASTM A234 WPB Elbow could also be threaded or machined; sometimes it is also socketed.

ASTM A350 LF3 Carbon Steel Round Bars are designed and developed to international quality standards. We have ready stock to ship to most parts of the country. These ASTM A350 LF3 carbon steel round bars are made of high grade corrosion resistant metal alloys.

ASTM A350 LF2 round bars are primarily used in the oil and gas industry.

There is another type of flange that is known as killed Carbon Steel Forged Flanges. They are destroyed in the melting process.

We are manufacturers, suppliers and exporters of Carbon Steel A105 / A105N Flanges, which, the American Society for testing materials, classifies as a standard that covers forged Carbon-Steel piping parts that also include carbon steel pipe flanges, which are serviceable in pressure systems at room temperatures as well as temperatures higher than it. We produce Carbon Steel A105 / A105N Blind Flanges which are successful in pressure bearing and sealing pipe ends in heavy pressure applications like hydraulic systems since they have a maximum bending stress at the centre.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A694 f60 flanges are also available in different functional types such as blind flanges, reducer flanges, butt weld flanges, etc.

In this standard it covers the specification of elbows, tees, reducers, caps and cross, it usually adopt butt welding ends.

No different elements – used as an alloying agent, not other types of steel, which makes nuts and bolts known as low-cost bolts. Carbon steel nut and bolt grades are divided into three different categories based on the carbon content of mild, medium and high carbon steels.

The fittings made up of carbon steel are applied through various industrial, commercial and domestic applications.

The ASTM A105 standard refers to carbon steel flanges that are forged for high-temperature applications in a pressure system.

The a105 is a mild steel forgings similar to the 20 steel.

Depending on the needs of the application, the A234 Wpb Elbow Dimensions vary.

Carbon steel pipe is the most common use piping material in different industries served for construction, structural, liquid transmissions for water, oil and gas.