ASTM A234 WPB pipe fittings carbon steel elbows available in welded and seamless type

We are manufacturer & exporters of A105 Flanges, ASTM A350 Carbon Steel Flanges, A694 Carbon Steel Flanges, Alloy Steel Pipe Fittings, ASTM A182 Alloy Steel Flanges, ASTM A182 F5, ASTM A182 F9, ASTM A182 F11, ASTM A182 F12, ASTM A182 F22, ASTM A182 F91, ASTM A105 Flange, ASTM A350 Flanges, ASTM A694 Flanges

Carbon Steel A105 Slip On Flanges are meant for non-critical conditions, as they have a low Carbon content. However, our Carbon Steel A105N SWRF Flanges are ‘normalised’ flanges for a better work performance.

ASTM/ASME A106/SA106 seamless carbon steel pipe is used in industrial applications involving high heat, including process piping, boiling plants, compression stations and refineries.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

ASTM A420 WPL6 Pipe Fittings such as WPL6 Caps, A420 WPL6 Weld Fittings, and SA 420 WPL6 Elbow. Our stock of low temperature steel fittings includes A420 Grade WPL6 fittings in a complete range of sizes and thicknesses.

ASTM A694 is a standard specification covering carbon and alloy steel forgings for pipe flanges, fittings, valves, and other parts for high pressure transmission services. The steel meets chemically analyzed standard chemical composition requirements and meets full casting and tensile strength performance requirements.

Carbon steel pipe is the most common use piping material in different industries served for construction, structural, liquid transmissions for water, oil and gas. Typical carbon steel pipe material grades in API 5L Grade B, X42 to X70, ASTM A106 B, ASTM A53 B, ASTM A252 Grade 3 and ASTM A333 Grade 6 etc.Mineral and slurry pipe is for the line pipe that applied in mining industries. A slurry pipeline is designated to transmit ores (Iron, Coal materials), or the industry mining waste, we called the pipeline as taillings. And generally these steel pipes connected in a long distances. Above materials mixed with water, we call slurry. People will use pumps to transport to the final destination then water will be filtered out. Since slurry contained different materials some with abrasive properties, so the pipe could be coated with 3PE, FBE layers to against from corrosion.
Both carbon steel pipe in seamless or welded could be used for the transmission of the slurry. So there is a wide range of material and standards available options to suit for the special working conditions.

STM A105 FLANGES AS PER ANSI B16.5, BS10 TABLE D, TABLE E, DIN STANDARD FLANGES manufacturers

ASTM A105 covers forged carbon steel flange and piping components for ambient and higher-temperature administration in pressure systems

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

ANSI B16.5 Carbon Steel Pipe Flange, ASTM A105 Flanges, ANSI B16.48 Carbon Steel A105N Blind Flange, ASTM A105N BS 4504 Carbon Steel Weld Neck Flange

ASTM A694 F65 is a key grade for Special Quality Alloys Ltd. We carry a wide range of re-forging stock which allows us to manufacture forgings on short lead-times. The material is often selected for its high yield capabilities combined with its excellent low temperature toughness and weldability.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Alloy steels contain varying proportions of alloying elements (such as manganese, silicon, nickel, titanium, copper, chromium, and aluminum) to control steel properties such as hardenability, corrosion resistance, strength, formability, weldability, or ductility . The differences are somewhat uniform, but for the sake of distinction, all alloy steels over 8% by weight, not carbon and alloys, are considered high-alloy steels. Alloy steel is harder, more durable, and more resistant to corrosion. Alloy steels with moderate to high carbon content are difficult to weld. However, if the carbon content is reduced to 1% to 3%, this alloy metal can achieve higher formability and weldability, thereby increasing strength.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

A350 LF3 round bars are in demand worldwide for their remarkable properties such as corrosion resistance, optimum finish, durability and dimensional accuracy.

This material should be arranged the charpy V impact test in temperature of -46¡æ, to make sure it can work in a lower temperature service, for example in cold weather, winter or deep-sea water offshore projects.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Regardless of the heat treatment applied to the carbon steel alloy, the higher carbon content in the material reduces the weldability of carbon steel fasteners, while also effectively reducing the melting point of the bolt. Most carbon steel studs are generally softer.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.

ASTM A420 WPL6 Pipe Fittings are one kind of butt welding pipe fittings,they are commonly produced from the steel pipes of ASTM A333 Grade 6.

ASTM A105 is an iron-carbon alloy with carbon content of 0.0218%~2.11%. Also called carbon steel.

ASTM A350 lf2 round bars are forged from standard quality carbon steel alloy. It has excellent tensile strength, corrosion resistance, ductility and mechanical properties that make it an excellent product. These carbon steel A350 LF2 bars are guaranteed to deliver the toughest industry standard products of the highest quality. Our CS A350 LF2 bars are made with the support of the latest equipment and are fully compliant with established industry specifications.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

ASTM A420 WPL6 Pipe Fittings are made up of a carbon steel alloy that is made up of carbon, manganese, phosphorus, sulfur and silicon.

The flange connection type usually comes with double units, with a gasket and some bolts & nuts to connect each other. (Firstly pipes are welded on the flanges, then valves and other equipment could be installed on flanges.)

When connecting these parts, put gasket in the middle of two flanges, then tightening the flange screws, so the two will be connected together tightly.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

SA350 LF2 flanges are mostly used to connect pipes, valves and pumps. It has several grades and classes. These are corrosion resistance and are used in many other industrial sectors. They are made to specified dimensions, or to dimensional standards, such as the ASME and API specifications. The material composition includes carbon, silicon, manganese, phosphorus, sulfur, molybdenum, copper, chromium, nickel, vanadium and niobium.

Of all applications, the most common type of application is the shaft. A694 rods are available in different diameters and can be used in the application. The steel round bars there are available for both cold and hot rolling processes. They have a perfect finish and precise diameter.