ASTM A234Gr.WPB CR 21SCH40 SMLS ASME B16.9

ASTM A694 carbon steel round bars have different properties due to the presence of alloying elements. Some of the properties inherited by round bars are good ductility, durability, high tensile strength, high temperature stability, high yield strength, high toughness, etc. This is why round bars are used in petrochemical, pharmaceutical, railway, chemical equipment and other industries. Therefore, industrial applications have a smooth flow at work.

The ASTM A420 Grade WPL6 can be seamless, welded or fabricated. There are different types of the fittings such as the unions, plugs, couplings, bends, caps and elbows.

The specification for Iso Class 4.8 standard covers Grade 4.8 fasteners like Bolts/Screws/Studs. This type of fastener Class 4.8 Bolt could either have Coarse thread and fine pitch thread formation. The standard Class 4.8 Carbon Steel Bolt has been manufactured from Low or medium carbon Alloy Steel.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

Carbon steel gr A105 is the result of a dual phase microstructure, which is alloyed with nitrogen.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

Carbon steel pipe is the most common use piping material in different industries served for construction, structural, liquid transmissions for water, oil and gas.

ASTM A234 is Standard Specification for wrought or forging steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.

ASTM A516 plate can be used to make flange blinds, reducer flanges without hubs, plate flanges, eyeglass blind flanges (Figure 8 blank flanges), spacer flanges, paddle blanks, and more. These flanges shall be in accordance with manufacturing standard specifications ASME B16.5, ASME B16.48, EN 1092-1, AS 2129 and ASME B16.47 etc.

ASTM a105 forged fittings is heavier, thicker and are intended for heavy industrial use. It is made up of forged carbon steel. Forging steel process makes the fitting very strong. Carbon steel is heated to molten temperatures and placed in the dies.

Hex bolts are used to fasten two or more parts together to form an assembly either because it cannot be manufactured as a single part or to allow for maintenance and repair disassembly. By definition “A Bolt is a headed and externally threaded mechanical device designed for insertion through holes in assembled parts to mate with a nut and is normally intended to be tightened or released by turning that nut.” When used with a preformed internally threaded (tapped) hole, the hex bolt’s head is turned to tighten, which technically makes it a screw (see our Tech Data section for a discussion regarding the differences between bolts and screws). Hex bolts are also known as: hex head bolts, cap screws, hex cap screws, hex head cap screws, machine bolts, hex machine bolts, hex head machine bolts and, if fully threaded, tap bolts, hex tap bolts and hex head tap bolts. A hex bolt is often differentiated from a hex cap screw by its underhead bearing surface: if it has a circular boss, called a washer face, it’s a hex cap screw¡ªif it doesn’t then it’s a hex bolt.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

ASTM A234 WP11 pipe fittings mean the pipe fittings which material are ASTM A234 WP11,they are used for the pressure piping systems of moderate and high temperature services.We are a manufacturer, trader, stockist, supplier and exporter of A234 WPL11 Pipe Fittings which abide by the specifications of ASTM A234, which include wrought Carbon steel as well as Alloy Steel fittings, of seamless and welded construction.

We are a manufacturer, supplier and exporter of Alloy Steel ASTM A234 WP22 Buttweld Fittings that form meaningful connections between multiple pipes of various sizes.

A350 LF2 Welding neck flange are used in many pressure parts, machine tools, pump shafts and many others. This is available in many sizes and is available in stock. carbon steel a350 lf2 flanges contains up to about 1% carbon and 1.65% manganese and other elements are present in quantities too small to affect its properties. They are used in all kinds of industries and clients appreciate the efforts put forth by the manufacturing department. Each range is packaged in quality-guaranteed material.

The fittings made up of carbon steel are applied through various industrial, commercial and domestic applications.

the ASTM A105 standard refers to carbon steel flanges that are forged for high-temperature applications in a pressure system

For instance, the use of Carbon Steel ASTM A105 Fittings is prominent in those applications that involved not only environments where the temperatures are high, but also in those applications at room temperature.

No different elements – used as an alloying agent, not other types of steel, which makes nuts and bolts known as low-cost bolts. Carbon steel nut and bolt grades are divided into three different categories based on the carbon content of mild, medium and high carbon steels.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

Most ASTM A694 F52 flange manufacturers state that the flange has enhanced mechanical properties such as its high tensile strength, good heat resistance and corrosion resistance.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

Tee is also known as pipe fitting tee or tee pipe fitting, tee joint, etc. Used mainly to change the direction of the fluid, used in the main pipe to branch pipe.

Flanges are an integral part of processing based industries. Most industries, including the oil and gas, water treatment and nuclear power generation make use of pipes, which permit the flow of media across different factory units

Carbon steel pipe is the most common use piping material in different industries served for construction, structural, liquid transmissions for water, oil and gas. Typical carbon steel pipe material grades in API 5L Grade B, X42 to X70, ASTM A106 B, ASTM A53 B, ASTM A252 Grade 3 and ASTM A333 Grade 6 etc.Mineral and slurry pipe is for the line pipe that applied in mining industries. A slurry pipeline is designated to transmit ores (Iron, Coal materials), or the industry mining waste, we called the pipeline as taillings. And generally these steel pipes connected in a long distances. Above materials mixed with water, we call slurry. People will use pumps to transport to the final destination then water will be filtered out. Since slurry contained different materials some with abrasive properties, so the pipe could be coated with 3PE, FBE layers to against from corrosion.
Both carbon steel pipe in seamless or welded could be used for the transmission of the slurry. So there is a wide range of material and standards available options to suit for the special working conditions.

Nuts and bolts exhibit low strength. However, mild steel is highly flexible. High ductility is a property that makes the material ideal for machining and welding. No different elements – used as an alloying agent, not other types of steel, which makes nuts and bolts known as low-cost bolts.

As we know, ASTM A234 steel pipe fittings are used in pressure piping and in pressure vessel fabrication, for services at moderate and elevated temperatures. The fittings material in this standard consist of killed steel, forgings, bars, plates, seamless or fusion-welded tubular products with filler metal added.

Carbon steel LF2 bars are mainly used in food processing installations and the pulp and paper industry.

Per specifications like the ASTM A105, using methods such as subjecting the material to normalizing, annealing, tempering, or quenching can bring about a noticeable change in the mechanical properties of the ASTM A105 Reducer.

The LTCS A420 WPL6 Weld Fittings are greatly resistant against the sea water and marine environments with 1/8 inches to 48 inches nominal bore sizes.